Grass-dominated vegetation, not species-diverse natural savanna, replaces degraded tropical forests on the southern edge of the Amazon Basin

Changes in land-uses, fire regimes, and climate are expected to promote savanna expansion in the Amazon Basin, but most studies that come to this conclusion fail to define “savanna” clearly or imply that natural savannas of native species will spread at the expense of forest. Given their different conservation values, we sought to differentiate between species-diverse natural savannas and other types of fire-maintained grass-dominated vegetation that replaced tropical forests between 1986 and 2005 in 22,500 km² of eastern lowland Bolivia. Analysis of Landsat TM and CBERS-2 satellite imagery revealed that, in addition to 1200 km² (7.1%) of deforestation for agriculture and planted pastures, 1420 km² (8.4%) of forest was replaced by derived savannas. Sampling in 2008 showed that natural savannas differed from forest-replacing derived savannas floristically, in soil fertility, and in fuel loads. Natural savannas typically occurred on sandy, acidic, nutrient-poor soils whereas most derived savannas were on comparatively fertile soils. Fuel loads in derived savannas were twice those of natural savannas. Natural savannas supported a diversity of grass species, whereas derived savannas were usually dominated by Guadua paniculata (native bamboo), Urochloa spp. (exotic forages), Imperata brasiliensis (native invasive), Digitaria insularis (native ruderal), or the native fire-adapted herb Hyptis suaveolens (Lamiaceae). Trees in derived savannas were forest species (e.g., Anadenanthera colubrina) and fire-tolerant palms (Attalea spp.), not thick-barked species characteristic of savanna environments (e.g., Curatella americana). In addressing tropical vegetation transitions it is clearly important to distinguish between native species-diverse ecosystems and novel derived vegetation of similar structure.     

Diversity of laccase genes from basidiomycetes in a forest soil

Fungal oxidative exo-enzymes lacking substrate specificity play a central role in the cycling of soil organic matter. Due to their broad ecological impact and available knowledge of their gene structure, laccases appeared to be appropriate markers to monitor fungi with this kind of oxidative potential in soils. A degenerate PCR-primer pair Cu1F/Cu2R, specific for basidiomycetes, was designed to assess directly the diversity of laccase genes in soils. PCR amplification of mycelial cultures and fruit-bodies of a wide spectrum of basidiomycetes, covering all functional groups (saprophytes, symbionts, and pathogens), produced multiple DNA fragments around 200 bp. A neighbor-joining tree analysis of the PCR-amplified laccase sequences showed a clear species-specificity, but also revealed that most fungal taxa possess several laccase genes showing a large sequence divergence. This sequence diversity precluded the systematic attribution of amplified laccase of unknown origin to specific taxa. Amplification of laccase sequences from DNA, extracted from a brown (moder) forest soil, showed a specific distribution of laccase genes and of the corresponding fungal species in the various soil horizons (O_h, A_h, B_v). The most organic O_h-horizon displayed the highest gene diversity. Saprophytic fungi appeared to be less widespread through the soil horizons and displayed a higher diversity of laccase genes than the mycorrhizal ones.     

Methionine oxidation enhances κ-casein amyloid fibril formation

The effects of protein oxidation, for example of methionine residues, are linked to many diseases, including those of protein misfolding, such as Alzheimer's disease. Protein misfolding diseases are characterized by the accumulation of insoluble proteinaceous aggregates comprised mainly of amyloid fibrils. Amyloid-containing bodies known as corpora amylacea (CA) are also found in mammary secretory tissue, where their presence slows milk flow. The major milk protein κ-casein readily forms amyloid fibrils under physiological conditions. Milk exists in an extracellular oxidizing environment. Accordingly, the two methionine residues in κ-casein (Met(95) and Met(106)) were selectively oxidized and the effects on the fibril-forming propensity, cellular toxicity, chaperone ability, and structure of κ-casein were determined. Oxidation resulted in an increase in the rate of fibril formation and a greater level of cellular toxicity. β-Casein, which inhibits κ-casein fibril formation in vitro, was less effective at suppressing fibril formation of oxidized κ-casein. The ability of κ-casein to prevent the amorphous aggregation of target proteins was slightly enhanced upon methionine oxidation, which may arise from the protein's greater exposed surface hydrophobicity. No significant changes to κ-casein's intrinsically disordered structure occurred upon oxidation. The enhanced rate of fibril formation of oxidized κ-casein, coupled with the reduced chaperone ability of β-casein to prevent this aggregation, may affect casein-casein interaction within the casein micelle and thereby promote κ-casein aggregation and contribute to the formation of CA.     

Influence of alpine plants growing on steep slopes on sediment trapping and transport by runoff

Understanding the interactions between soil and the organisms that are conducive to decreasing sediment runoff is a great concern on high-elevation ski trails. Intense rainfalls on steep slopes combined with soil formed on gypsum result in recurrent erosion. This study was conducted in the northern French Alps to determine the abilities of species: (1) to make mounds and (2) to trap sediment and thereby to control erosion at the slope scale. We also investigated relevant above-ground plant characteristics related to those abilities. Sediment runoff or deposition was investigated at small and large spatial scales. We assessed whether hoof prints in soil reflect sediment runoff at the slope scale by trapping sediment. Populations of plants growing on two slope angles (25° and 35°) and three vegetation cover densities (15%, 35%, 60%) were surveyed. An experiment was also conducted to measure the sediment deposit upslope of target species and over three months during the autumn. Small mounds were found upslope of the plant and sediment deposit measurements showed that they resulted from a sedimentation process. Nevertheless the species differed in their capacity to make mounds. Sesleria caerulea and Festuca alpina had the highest amount of sediment deposition over the experimental period. Among the plant characteristics, plant length was positively correlated with mound area, while the roundness index of the canopy was negatively correlated with mound height. Mound formation was also positively related to the number of tillers or shoots. Sediment accumulation in cow hoof prints was linked to runoff that occurred at the slope scale. Low deposition in hoof prints means low sediment runoff or a large deposition on mounds, due to the increase in vegetation cover. All the findings stressed that understanding the processes in action at larger scales requires studying processes at smaller scales.     

Sink or swim: strategies for cost-efficient diving by marine mammals

Locomotor activity by diving marine mammals is accomplished while breath-holding and often exceeds predicted aerobic capacities. Video sequences of freely diving seals and whales wearing submersible cameras reveal a behavioral strategy that improves energetic efficiency in these animals. Prolonged gliding (greater than 78% descent duration) occurred during dives exceeding 80 meters in depth. Gliding was attributed to buoyancy changes with lung compression at depth. By modifying locomotor patterns to take advantage of these physical changes, Weddell seals realized a 9.2 to 59.6% reduction in diving energetic costs. This energy-conserving strategy allows marine mammals to increase aerobic dive duration and achieve remarkable depths despite limited oxygen availability when submerged.     

Natural degradation of low-level petroleum hydrocarbon contamination under crop management

Journal of Soils and Sediments - Natural degradation of petroleum hydrocarbons (PHC) is a crucial process to consider when managing contaminated soils. However, the degradation rate is dictated by...     

Yield, yield components and plant architecture in the F3 generation of common bean (Phaseolus vulgaris L.) derived from a cross between the determinate cultivar ‘Prelude’ and an indeterminate landrace

Growth trials were conducted outdoors in the UK to determine the yield, yield components and plant architectural differences between determinate and indeterminate Phaseolus vulgaris bean plants. F3 lines derived from crosses between ‘Prelude’, a determinate cultivar and ‘V8’, an indeterminate landrace, were grown together with the parents and ‘Carioca’, an indeterminate landrace from Brazil. Data were recorded on flowering date, number of nodes on main stem at flowering, plant height at maturity, number of pods/plant, number of seeds/pod, number of seeds/plant, 100-seed weight, seed mass/plant, percentages of diseased and healthy seeds/plant. Determinate F3 lines had significantly lower (P < 0.05) seed mass/plant, fewer pods/plant, fewer seeds/pod, fewer seeds/plant, lower harvest index, shorter stems, earlier date of flowering, fewer nodes at flowering and fewer healthy seeds/plant than indeterminate F3 lines. However, determinate genotypes had significantly larger (P < 0.05) pods to accommodate their larger seeds compared with indeterminate lines. A similar situation was found when the yield and yield components of ‘V8’, ‘Prelude’ and ‘Carioca’ were evaluated; the highest seed mass/plant was given by ‘V8’ and the lowest by ‘Prelude’. Furthermore, some indeterminate genotypes with Type IV growth habit yielded significantly higher (P < 0.05) than the high-yielding parent, ‘V8’, indicating a positive influence on seed yield by crossing different genotypes.     

Making Asian students,making students Asian: The racialisation of export education in Auckland,New Zealand

Abstract: In recent years, international education has become a source of considerable political, academic and media debate in New Zealand. This is nowhere more the case than with regards to Auckland, the New Zealand city that has hosted the greatest number of international students. This paper focuses on the media debates around international students in Auckland with particular emphasis on the representations of the largest group of international students, those who originate from countries within the North‐East Asian region. The media representations of these students have fixed a diverse group of individuals within a singular racial identity that is known by stereotypical economic, cultural and social characteristics. As a result, these representations have further problematised the interaction between international students and the host population in Auckland while simultaneously implicating a cohort of young New Zealand citizens and permanent residents who are of similar descent within the same discourses. This process of othering the Asian student, regardless of citizenship, has consequences not simply for the practice of exporting education in this city but also for the future of a multicultural Auckland and New Zealand.     

Utility of pearl millet landraces in breeding dual-purpose hybrids for arid zone environments of India

In pearl millet (Pennisetum glaucum (L.) R. Br.), single cross hybrids based largely on exotic germplasm, have found very limited adoption in drought-prone arid regions mainly due to their inadequate adaptation to prevalent extremely harsh agro-climatic conditions. This study tested the hypothesis that the use of restorer parents derived from adapted landrace germplasm could be an alternative strategy in developing suitable hybrids for arid regions. Forty inbred restorer lines developed from two phenotypically diverse landraces were used to develop hybrids evaluated in this study for their performance in five typical arid zone environments between 2003 and 2007. Inbred lines from both landrace populations differed significantly in their combining ability for biomass, harvest index and grain and stover yields. A larger proportion of experimental hybrids, based on selected inbred lines, significantly outperformed the commercial checks for grain and stover yields. Increase in grain and stover yields was achieved primarily due to their higher biomass productivity, with no decline in harvest index. Choice of landrace determined the relative grain and stover productivity of their hybrids. Phenotypic differences observed in parental landraces in tillering and panicle length were also visible in their respective hybrids, indicating that characteristics of landrace parental populations were transmitted in their hybrids.     

Genetic loci linking improved heat tolerance in wheat (<Emphasis Type="Italic">Triticum aestivum</Emphasis> L.) to lower leaf and spike temperatures under controlled conditions

Heat stress adversely affects wheat production in many regions of the world and is particularly detrimental during reproductive development. The objective of this study was to identify novel quantitative trait loci (QTL) associated with improved heat tolerance in wheat (Triticum aestivum L.) and to confirm previous QTL results. To accomplish this, a recombinant inbred line (RIL) population was subjected to a three-day 38°C daytime heat stress treatment during early grain-filling. At maturity, a heat susceptibility index (HSI) was calculated from the reduction of three main spike yield components; kernel number, total kernel weight, and single kernel weight. The HSI, as well as temperature depression (TD) of the main spike and main flag leaf during heat stress were used as phenotypic measures of heat tolerance. QTL analysis identified 14 QTL for HSI, with individual QTL explaining from 4.5 to 19.3% of the phenotypic variance. Seven of these QTL co-localized for both TD and HSI. At all seven loci, the allele for a cooler flag leaf or spike temperature (up to 0.81°C) was associated with greater heat tolerance, indicated by a lower HSI. In a comparison to previous QTL results in a RIL population utilizing the same source of heat tolerance, seven genome regions for heat tolerance were consistently detected across populations. The genetic effect of combining three of these QTL, located on chromosomes 1B, 5A, and 6D, demonstrate the potential benefit of selecting for multiple heat tolerance alleles simultaneously. The genome regions identified in this study serve as potential target regions for fine-mapping and development of molecular markers for more rapid development of heat tolerant germplasm.