Comparative Economics of US Catfish Production Strategies: Evidence from a Cross‐sectional Survey

Understanding the effects of specific management strategies on yields and economic outcomes on commercial catfish farms could provide useful guidance to catfish farmers on the most profitable sets of production practices. Data from the U.S. Department of Agriculture–National Animal Health Monitoring System (USDA–NAHMS) 2009 survey of production practices on catfish farms in Alabama, Arkansas, Louisiana, and Mississippi were used to identify five clusters of catfish farms that use various stocking densities, channel versus hybrid catfish, different aeration levels, and utilize automated oxygen sensors. The lowest production costs ($1.96/kg) were found in cluster 1 and were followed in order of increasing costs per kilogram of clusters 2 and 4 ($2.16/kg) and cluster 5 ($2.73/kg); the highest cost corresponded to cluster 3 ($2.84/kg). The lowest risk levels corresponded to the clusters with the lowest production costs per kilogram of fish and the highest risk levels to the highest production costs. This analysis demonstrated that different types of management models can achieve similar levels of production costs ($/kg), and it appears that there is not one single economically optimum way to raise catfish. The key to least‐cost production is to balance the use of inputs, their associated costs, and the yield produced to achieve economic efficiency within the farm's overall business and management model.     

Dose–Response Studies for Pituitary and Testicular Function in Male Dogs Treated with the GnRH Superagonist, Deslorelin

We tested the effect of dose of GnRH superagonist on pituitary and testicular function in a study with four groups of four male dogs. The Controls received blank implants and the other three groups received implants containing 3, 6 or 12 mg deslorelin (d ‐Trp⁶‐Pro⁹‐des‐Gly¹⁰‐GnRH ethylamide). In all deslorelin‐treated groups, there was initially an acute increase in plasma concentrations of LH and testosterone, followed by declines such that both hormones became undetectable after approximately 12 days. There was a dose–response in some of these early aspects of the hormone profiles. With respect to long‐term effects of treatment, the 12‐mg dose had significantly greater effects than the smaller doses for the duration of minimum testicular volume [366 ± 77, mean ± SEM (3 mg), 472 ± 74 (6 mg), and 634 ± 59 (12 mg) days], absence of ejaculate [416 ± 88 (3 mg), 476 ± 83 (6 mg), and 644 ± 67 (12 mg) days], undetectable plasma concentrations of LH and testosterone [367 ± 64 (3 mg), 419 ± 72 (6 mg), and 607 ± 69 (12 mg) days], the delay until complete recovery of LH and testosterone secretion [394 ± 65 (3 mg), 484 ± 72 (6 mg) and 668 ± 47 (12 mg) days], and the delay until testes had regrown to normal volume [408 ± 77 (3 mg), 514 ± 74 (6 mg), 676 ± 59 (12 mg) days]. The time taken to restore full ejaculates was also longest for the 12‐mg dose: 716 ± 67 (12 mg) days vs 440 ± 66 (3 mg) and 538 ± 83 (6 mg) days after implantation. There was no correlation between delay to recovery of normal ejaculate quality and body mass. We conclude that the dose–response relationship with deslorelin implants is not expressed with respect to the degree of suppression of reproduction, but on the maximum duration of suppression and thus to delay until recovery.     

Optimal Product Mix for Integrated Livestock-Fish Culture Systems on Limited Resource Farms

A mixed integer linear programming model was developed to select constrained optimum combinations of aquacultural production alternatives for limited-resource farmers. The model maximized production of fish and livestock for home consumption and cash income.
Poor farmers without access to credit sources make best use of pond resources by stocking fish and utilizing inorganic fertilizer. Integrated systems require greater levels of capital to cover livestock feed costs. Ponds that cannot be drained are best utilized by stocking a polyculture system of bighead carp ( Aristichthys nobilis ), common carp ( Cyprinus carpio ) and fathead minnows ( Pimephales pro-melas ) while drainable ponds are more efficiently utilized in tilapia production.     

Measuring Oxidative Gelation of Aqueous Flour Suspensions Using the Rapid Visco Analyzer

The Rapid Visco Analyzer (RVA) was investigated as a tool to measure oxidative gelation capacity (OGC) of aqueous wheat flour suspensions. One club wheat patent flour was used to determine optimal hydration time, and 33 straight‐grade flours (representing 12 hard and 21 soft varieties) were used to observe varietal differences in OGC. A 33.3% w/w flour–water suspension was tested in the RVA at 30°C and 160 rpm for 1 min to establish the flour–water baseline viscosity, and then 65 μL of 3% H₂O₂ was added and the viscosity of the suspension measured at 160 rpm for a further 5 min. Flour from the club wheat showed that 20 min of prehydration was needed to observe full OGC potential. For the 33 straight‐grade flours, final RVA water baseline viscosity was correlated with Bostwick Consistometer (BC) flow (r = −0.93, P ≤ 0.01), and RVA H₂O₂ peak viscosity was correlated with H₂O₂ BC flow (r = –0.81, P ≤ 0.01). The RVA was able to differentiate H₂O₂‐reactive from nonreactive flours. The RVA can observe phenomena not observable with the BC method (e.g., viscosity reduction over time at constant shear rate), which can provide potentially valuable additional information about the nature of OGC in wheat flour suspensions.     

Effects of sequential implanting and ractopamine hydrochloride supplementation on carcass characteristics and longissimus muscle tenderness of calf-fed steers and heifers

A 4 × 2 factorial arrangement of treatments (4 growth-enhancement treatments × 2 sex classes) was used to quantify effects of initial implanting (I-implant, d 0), terminal implanting (T-implant, d 63), and feeding ractopamine hydrochloride [RAC, 200 mg/(animal/d)] for the last 28 d on feed on carcass characteristics and LM shear force (WBSF) of calf-fed steers (n = 159) and heifers (n = 132). Growth-enhancement treatments included the following: TRT1, T-implant only; TRT2, I-implant and RAC; TRT3, I-implant and T-implant; TRT4, I-implant, T-implant, and RAC. Growth responses (BW and ADG) were measured in 3 segments of the finishing period: 1) d 0 to 63, 2) d 63 to 28 d before slaughter, and 3) final 28 d. Cattle were slaughtered after 152, 166, or 180 d of finishing; carcass data were collected after a 48-h chill; and LM WBSF was measured at 3, 7, 14, 21, and 28 d postmortem. A priori contrasts were constructed to test effects associated with use vs. exclusion of growth enhancement in each segment of the finishing period. The interaction between sex class and treatment was not significant (P > 0.05) for any trait tested, indicating that the 4 treatments elicited similar effects in both sexes. Initial implanting improved (P < 0.001) ADG from d 0 to 63 by 11.5%, terminal implanting improved (P < 0.001) ADG from d 63 to 28 d before slaughter by 15%, and supplementing twice-implanted cattle with RAC enhanced ADG during the final 28 d of finishing by 12%. Effects of I-implant, T-implant, and RAC resulted in LM area increases of 3 cm(2) (P = 0.015), 6 cm(2) (P < 0.001), and 3 cm(2) (P = 0.011), respectively, and HCW responses of 11 kg (P = 0.011), 16 kg (P = 0.001), and 6 kg (P = 0.195), respectively. Initial implanting resulted in a 20-point reduction (P = 0.097) in marbling, and T-implant reduced marbling by 25 points (P = 0.04), whereas marbling score was unaffected (P = 0.236) by RAC supplementation. Cattle that received only 1 implant (TRT1 and TRT2) produced carcasses with greater (P = 0.026) mean marbling scores and greater (P = 0.01) rates of conformity to beef carcass marketing specifications for HCW, quality grade, yield grade, and LM area than did cattle that were implanted twice (TRT3 and TRT4). Values for LM WBSF were not affected (P > 0.05) by initial or terminal implanting; however, RAC supplementation increased (P = 0.007) mean LM WBSF by 0.23 kg, which translated into a reduction (P = 0.007) in predicted consumer acceptance of LM steaks.     

Polymers with Very Low Polydispersities from Atom Transfer Radical Polymerization

A radical polymerization process that yields well-defined polymers normally obtained only through anionic polymerizations is reported. Atom transfer radical polymerizations of styrene were conducted with several solubilizing ligands for the copper(I) halides: 4,4'-di-tert-butyl, 4,4'-di-n-heptyl, and 4,4'-di-(5-nonyl)-2,2'-dipyridyl. The resulting polymerizations have all of the characteristics of a living polymerization and displayed linear semilogarithmic kinetic plots, a linear correlation between the number-average molecular weight and the monomer conversion, and low polydispersities (ratio of the weight-average to number-average molecular weights of 1.04 to 1.05). Similar results were obtained for the polymerization of acrylates.