Use of marine yeasts as an available diet for mass cultures of Moina macrocopa

A 4‐week feeding trial was conducted to test the use of marine yeasts purified from seawater and sediments as a dietary source in cultivating a cladoceran, Moina macrocopa, a potential alternative live food for fish larvae. Optimal growth conditions of two yeast strains were obtained for NaCl concentration, pH and temperature. Moina macrocopa was cultivated using different diets: marine yeasts (Debaryomyces hansenii Yeast‐14 and Candida austromarina Yeast‐16) and a commercial diet (Erythrobacter sp. Sπ‐I). The essential amino acids of both the yeast strains were nearly as great as those in M. microcopa. Further, the yeast‐fed M. macrocopa had essential amino acid profiles similar to the documented values for rotifers and Artemia enriched in microalgae and commercial diets. Erythrobacter sp. Sπ‐I lacked n‐3 polyunsaturated fatty acids, 20:5n‐3 and 22:6n‐3, which were also low but detected in both yeasts. An increase in the 20:5n‐3 [eicosapentaenoic acid (EPA)] and 22:6n‐3 [docosahexaenoic acid (DHA)] levels, compared with the levels in yeast strains themselves, was more pronounced in the 22:6n‐3 level of Moina fed the C. austromarina, resulting in a high DHA:EPA ratio. When the Moina diets were switched, their δ¹³C values shifted gradually towards the values of the switched diets. Diet switch from Erythrobacter sp. Sπ‐I to C. austromarina Yeast‐16 resulted in a more rapid turnover of Moina tissue carbon than that in the inverse case. When fed a mixed diet, the δ¹³C values of Moina tissue approached the value of marine yeasts immediately. These temporal changes in the δ¹³C values of Moina tissue indicate the preferential ingestion of marine yeasts and a selective assimilation of the carbon originated from marine yeasts. These findings suggest that marine yeasts, particularly C. austromarina Yeast‐16, are highly available to mass cultures of M. macrocopa, providing better nutritional and dietary values than the commercial diet (Erythrobacter sp. Sπ‐I).     

Numerical modeling and design of inflatable structures—application to open-ocean-aquaculture cages

Numerical simulation and design of an inflatable open-ocean-aquaculture cage is presented using nonlinear finite element analysis of membrane structures. Numerical instability caused by the tension-only membrane has been removed by adding an artificial shell with small stiffness. The material properties of a fabric material are obtained from tensile tests in both hoop and longitudinal directions, assuming the material is anisotropic. Wrinkling, defined as an onset of compressive stress, is monitored as design criteria. The finite element model is validated using a modified beam theory for the inflatable structure by comparing the maximum deflection and stress. Good agreement is observed between the numerical and theoretical results. A full-scale cage model is created using membrane, shell, and string elements to test the stiffness and integrity of the system. The feasibility study indicates that the inflated structure has sufficient stiffness to be used as the structural support within a fish cage. Based on the parameter study, several designs are suggested.     

Detection of quinolone-resistance genes in Photobacterium damselae subsp. piscicida strains by targeting-induced local lesions in genomes

Quinolone-resistant strains of the fish-pathogenic bacterium, Photobacterium damselae subsp. piscicida are distributed widely in cultured yellowtail, Seriola quinqueradiata (Temminck & Schlegel), in Japan. The quinolone resistance-determining region (QRDR) was amplified with degenerate primers, followed by cassette ligation-mediated PCR. Open reading frames encoding proteins of 875 and 755 amino acid residues were detected in the gyrA and parC genes, respectively. Resistant strains of P. damselae subsp. piscicida carried a point mutation only in the gyrA QRDR leading to a Ser-to-Ile substitution at residue position 83. No amino acid alterations were discovered in the ParC sequence. A mutation in the gyrA gene was also detected in nalidixic acid-resistant mutants of strain SP96002 obtained from agar medium containing increased levels of quinolone. These results suggest that GyrA, as in other Gram-negative bacteria, is a target of quinolone in P. damselae subsp. piscicida. Furthermore, we attempted to detect a point mutation using targeting-induced local lesions in genomes (TILLING), which is a general strategy used for the detection of a variety of induced point mutations and naturally occurring polymorphisms. We developed a new detection method for the rapid and large-scale identification of quinolone-resistant strains of P. damselae subsp. piscicida using TILLING.     

Induction of larval settlement and metamorphosis of the abalone, Haliotis discus hannai larvae using bromomethane and potassium chloride

Larvae of Haliotis discus hannai were induced to settle and metamorphose by exposure to seawater supplemented with bromomethane. The settlement and metamorphosis of veliger larvae were observed with bromomethane concentrations of 300, 600, 900, 1200, 1500 ppm on the benthic diatom plates. The highest settlement and metamorphosis rates of larvae were observed in bromomethane concentrations of 600 ppm.

Abalone larvae were induced to settle and metamorphose by exposure to seawater supplemented with potassium chloride. The settlement and metamorphosis of veliger larvae was observed in potassium chloride concentrations of 14, 19, 24 and 29 mM on the benthic diatom plates. The highest settlement and metamorphosis rates of larvae were observed in potassium chloride concentrations of 14–19 mM.     

One-step continuous coating of silver nanoparticles on well aligned fibers of PAI/PTACM

Highly aligned ultrafine fibers of Poly (amide-co-imide) PAI (torlon)/Poly (trimellitic anhydride chloride-co-4, 4′-methylene dianiline) (PTACM) blends have been prepared by using mechano-electrospinning. Employing a mixed solvent system of DMSO and THF alongwith water coagulation bath as a medium, continuous fibers with improved mechanical properties have been obtained. The continuity of the fibers is strongly dependent on the solvent mixing ratio of DMSO and THF (6:4). Continuous fibers with the most uniform diameter are obtained when a 30 % of PAI and PTACM (1:1) resins by weight is used in the blending solution. The aligned fibers are further coated with silver nanoparticles using a one-step process by passing the electrospunned fibers through PEG solution and a silver precursor solution followed by reduction in a continuous process. The advantage of our method lies in a uniform silver coating on a single fiber that can be coated continuously on a larger length scale (～Km). The mechanical properties of these fibers are dramatically improved after their alignment. Better electrical conductivity is obtained for these fibers after they are coated with silver nanoparticles. The highly aligned silver decorated fibers utilizes a novel electroless continuous process using Polyethylene glycol (PEG), which shows good binding properties and can be used for various bio and electronic applications.     

A concept to define a quantitative measure of mixture state

Mixing is a mechanical operation to distribute components evenly in a plane or a space. Composite molding and textile manufacturing industries are routinely taking advantage of mixing operations in order to distribute raw materials uniformly or in a specific way during composite molding or textile producing processes. Key issues to identify any mixed state are (1) the time needed to accomplish through mixing (the time scale) and (2) the extent of the homogeneity of the mixture in a plane (the length scale). In this paper, a new concept of mixture status is focused on the length scale. The goal to derive a new concept of mixture status is to establish a measure to describe the mixed extent of a mixture consisting of two components, derived from clump size and clump distribution. To verify the usefulness of the newly conceived “Mixedness Index”, the suggested definition was compared with the existing coefficient of variation (CV) method based on simulation and experiments. Results showed a reasonable relationship between the Mixedness Index and observation, demonstrating the feasibility of the proposed Mixedness Index for industrial applications.     

A specific colorimetric signaling of biological thiolsbased on intermolecular n-π charge transfer interaction

A new charge-transfer (CT) complex, consisting of 2,3-dichloro-5-nitro-1,4-naphthoquinone and biothiols such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH) has been designed to sensing biothiols. The method is selective and sensitive for biothiols detection without the interference of other amino acids.     

Effects of interspecific competition on the growth and competitiveness of five emergent macrophytes in a constructed lentic wetland

To evaluate the performance of new rice establishment methods viz., system of rice intensification (SRI) and integrated crop management (ICM), a field study was conducted during 2008–11 in South Garo Hills, Meghalaya, foot hills of Eastern Himalayas, India. Field demonstrations were undertaken during wet seasons of 2008–11 and socio-economic information in the context of farmer’s realities were obtained during 2010–11 using a well structured questionnaire administered to 134 farmers. The results indicated that the average higher productivity of rice under SRI and ICM demonstration was 209.9 and 185.4 %, respectively, over conventional rice culture (CRC). The SRI and ICM methods of rice cultivation could save seeds (97.56 and 60.98 %), saving water (78.05 and 63.66 %), reduce cost (70.33 %), higher yield etc. compared to CRC. The main reasons for non-adoption of SRI/ICM was related to involvement of more efforts, faith towards traditional practices, ignorance and lack of knowledge on scientific water management. The net-return of $816.69, $706.63 and $51.48/ha was realized under SRI, ICM and CRC, respectively. The co-efficient of multiple determinations (R ²) of the production function was 0.695 in SRI, 0.714 in ICM and 0.734 in CRC which indicated that about 69.5, 71.4 and 73.4 % of the variation in rice productivity under SRI, ICM and CRC, respectively were explained by the independent variable and remaining 30.5, 28.6 and 26.6 %., respectively in SRI, ICM and CRC were as a result of non-inclusion of some explanatory variables as well as other factors outside the farmers control.