Chlorogenic acid supplementation during in vitro maturation improves maturation,fertilization and developmental competence of porcine oocytes

Chlorogenic acid (CGA) is a quinic acid conjugate of caffeic acid, and a phytochemical found in many fruits and beverages that acts as an antioxidant. The present study investigated the effects of CGA supplementation during in vitro maturation (IVM), on in vitro development of porcine oocytes, to improve the porcine in vitro production (IVP) system. Oocytes were matured either without (control) or with CGA (10, 50, 100 and 200 μM). Subsequently, the matured oocytes were fertilized and cultured in vitro for 7 day. The rates of maturation, fertilization and blastocyst formation of oocytes matured with 50 μM CGA were significantly (p < .05) higher than those of the control oocytes. Hydrogen peroxide (H₂O₂) is one of the reactive oxygen species and induces DNA damage in porcine oocytes. When oocytes were matured with 1 mM H₂O₂ to assess the protective effect of CGA, 50 μM CGA supplementation improved the maturation rate and the proportion of DNA‐fragmented nuclei in oocytes compared with control oocytes matured without CGA. Moreover, when oocytes were matured with either 50 μM CGA (control) or caffeic acid (10, 50 and 100 μM), the rates of maturation, fertilization and the blastocyst formation of oocytes matured with 50 μM CGA were similar to those of oocytes matured with 10 and 50 μM caffeic acid. Our results suggest that CGA has comparable effects to caffeic acid, and IVM with 50 μM CGA is particularly beneficial to IVP of porcine embryos and protects oocytes from DNA damage induced by oxidative stress. Supplementation of CGA to the maturation medium has a potential to improve porcine IVP system.     

Validation of the BioPRYN enzyme‐linked immunosorbent assay for detection of pregnancy‐specific protein‐B (PSPB) and diagnosis of pregnancy in American bison (Bison bison)

This study assessed the accuracy of the commercial BioPRYN^® ELISA for the detection of pregnancy‐specific protein‐B (PSPB) using a single blood sample to determine pregnancy status in American bison (Bison bison). A total of 49 bison cows were used in the study, and sampled at two time‐points during the gestation period, fall and spring, correlating with early‐ to mid‐term gestation (average 62.9 days post‐mating) and mid‐ to late‐term gestation (average 229.2 days post‐mating), respectively. Sensitivity of the test during early‐ to mid‐term gestation sampling period (fall) was 87.1%, while specificity was 100%; sensitivity of the test during late‐term gestation sampling period (spring) was 96.3%, while specificity remained at 100%. In total, the test showed a total sensitivity of 91.4%, specificity of 100% and total accuracy of 93.8%, similar to domestic cattle. Use of the single‐sample BioPRYN^® ELISA in American Bison for pregnancy diagnosis is economical and practical, minimizing animal handling time, frequency and subsequent stress while providing accurate results for pregnancy diagnosis at 62 days post‐mating. This method should be considered over more traditional pregnancy diagnosis methods for use in managed bison herds.     

Miscibility, structural characteristics, and thermal behavior of wet spun regenerated silk fibroin/nylon 6 blend filaments

In this study, the regenerated silk fibroin (SF)/nylon 6 blend filaments were fabricated by the wet spinning and miscibility, structural characteristics, and thermal behavior of blend filaments were elucidated. The XRD results implied that the amount of crystalline region of each polymer did not change linearly with the blend ratio suggesting that there are some changes in the miscibility depending on the mixing ratio. The SEM observation revealed that the miscibility of blend decreased with an increase of nylon 6 resulting in a severe phase separation in 50/50 SF/nylon 6 filament. The miscibility governed the thermal behavior of blend filaments. The melting point of nylon 6 remained constant until 50 % nylon 6 content, whereas the melting point depression appeared in 30 % nylon 6 implying miscibility. Interestingly, the thermal decomposition of the nylon 6 component was accelerated by the presence of SF and the acceleration action of SF became stronger as the miscibility increased.     

Gall production on hawthorns caused by <Emphasis Type="Italic">Gymnosporangium</Emphasis> spp. in Hatay province,Turkey

Three hawthorn and related rust diseases caused by Gymnosporangium confusum on Crataegus monogyna, Gymnosporangium clavariiforme on Crataegus orientalis and Gymnosporangium sabinae on Pyrus communis were detected in Hatay province, Turkey. G. confusum was also found causing telial galls on Juniperus communis. G. confusum and G. clavariiforme produced aecial horns on overwintered galls on hawthorn twigs from May to June. The production of galls caused by Gymnosporangium on the secondary host is unusual. Portions of the nuclear ITS and LSU rDNA were sequenced for all three species of Gymnosporangium for use as a species barcode; sequences were deposited in GenBank. Sequence data from G. clavariiforme and G. sabinae matched those in GenBank; however, this is the first study to deposit sequence data from G. confusum to GenBank. The life cycles of G. confusum and G. clavariiforme are discussed along with implications for disease control.     

Suppression of pine wilt disease by an antibacterial agent,oxolinic acid

BACKGROUND: Pine wilt disease (PWD) is very complex and has been reported to be caused by pine wood nematode, Bursaphelenchus xylophilus (Steiner & Buhrer) Nickle, and its accompanying bacteria. However, there is no report on the control of PWD by antibacterial agent. The present study was performed to investigate disease control efficacy of antibacterial agents against PWD. RESULTS: Among six antibacterial antibiotics tested, oxolinic acid (OA) showed the strongest antibacterial activity against five bacteria isolated from three strains of pine wood nematode. In in vivo assay, it effectively suppressed the development of PWD in three‐year‐old seedlings of Pinus densiflora Sieb. & Zucc.; it showed 71% control when injected at 3 mg per seedling. A mixture of OA and the nematicidal agent abamectin (Ab) showed higher disease control efficacy against PWD than either OA or Ab alone. In addition, OA alone and a mixture of OA and Ab also controlled PWD in approximately 20‐year‐old pine trees under field conditions. CONCLUSION: This is the first report on the suppression of PWD by OA. The result strongly indicates that PWD could be controlled by antibacterial antibiotic alone and a combination of antibacterial and nematicidal agents. Copyright © 2010 Society of Chemical Industry     

Different crop rotation systems as drivers of change in soil bacterial community structure and yield of rice, <Emphasis Type="Italic">Oryza sativa</Emphasis>

Intensive cropping, especially of rice, is considered to contribute to negative effects not only on soil chemical and biological properties but also on long-term grain yield. Appropriate crop rotation is often practiced as an alternative strategy to overcome the negative side effects of intensive cropping. Although soil microbial diversity and community structure have been shown to respond differently to altered agricultural management practices, little is known about possible links between crop rotation and grain yield on bacterial communities in rice paddy soil. In this study, we investigated the impact of specific rotational crops and compared it with intensive rice cultivation. The main crop rice (Oryza sativa) was rotated with maize (Zea mays) and mungbean (Phaseolus aureus) in different combinations in a system cultivating three crops per year. Soil bacterial communities were studied in two different cropping periods using pyrosequencing of the variable V4 region of the 16S rRNA. Our results showed that rotation with alternative crops increased rice yield by 24–46% depending on rotation structure and that bacterial community structure was altered in the presence of mungbean and/or maize compared to that in rice monoculture. In the crop rotation systems, composition, abundance, and diversity of soil bacterial communities were significantly different and higher than those in rice monoculture. Our results show that effects of crop rotation relate to changes in soil bacterial community structure suggesting that appropriate crop rotations provide a feasible practice to maintain the equilibrium in soil microbial environment for sustainable rice cultivation.     

Differentiation of Umbilical Cord Lining Membrane-Derived Mesenchymal Stem Cells into Endothelial-Like Cells

Background: Stem cell therapy for the treatment of vascular-related diseases through functional revascularization is one of the most important research areas in tissue engineering. The aim of this study was to investigate the in vitro differentiation of umbilical CL-MSC into endothelial lineage cells. Methods: In this study, isolated cells were characterized for expression of MSC-specific markers and osteogenic and adipogenic differentiation. They were induced to differentiate into endothelial-like cells and then examined for expression of the endothelial-specific markers, karyotype, and functional behavior of cells. Results: Isolated cells expressed MSC-specific markers and differentiated into adipocytes and osteoblasts. After endothelial differentiation, they expressed CD31, vWF, VE-cadherin, VEGFR1, and VEGFR2 at both mRNA and protein level, but their morphological changes were not apparent when compared with those of undifferentiated cells. There were no significant changes in karyotype of differentiated cells. Furthermore, angiogenesis assay and LDL uptake assay showed that differentiated cells were able to form the capillary-like structures and uptake LDL, respectively. Conclusion: The results indicated that umbilical CL-MSC could differentiate into functional endothelial-like cells. Also, they are suitable for basic and clinical studies to cure several vascular-related diseases. Key Words: Endothelial differentiation, Endothelial-like cells, Mesenchymal stem cells, Umbilical cord lining membrane     

Injection molding of vertebral fixed cage implant

A vertebral cage is a hollow medical device which is used in spine surgery. By implanting the cage into the spine column, it is possible to restore disc and relieve pressure on the nerve roots. Most cages have been made of titanium alloys but they detract the biocompatibility. Currently PEEK (polyether ether ketone) is applied to various implants because it has good properties like heat resistance, chemical resistance, strength, and especially biocompatibility. A new shape of vertebral cage is designed and injection molding of PEEK is considered for production. Before injection molding of the cage, it is needed to evaluate process conditions and properties of the final product. Variables affecting the shrinkage of the cage are considered, e.g., injection time, packing pressure, mold temperature, and melt temperature. By using the numerical simulation program, MOLDFLOW, several cases are studied. Data files obtained by MOLDFLOW analysis are used for stress analysis with ABAQUS, and shrinkage and residual stress fields are predicted. With these results, optimum process conditions are determined.     

Aroma finishing of PET fabrics with PVAc nanoparticles containing lavender oil

A durable aroma finishing for PET fabric was carried out by adopting poly(vinyl acetate) (PVAc) nanoparticles containing lavender oil (LO) in core. Relatively small size of PVAc nanoparticles (ca. 244 nm of mean particle diameter) was expected to resist the frictional destruction of the particles, which is frequently observed in cases of microcapsules. PVAc nanoparticles containing LO in core were prepared by emulsification-diffusion method and their application as an aroma releasing agent for PET fabrics was assessed through the observation of releasing profiles of LO in ethanol for experimental acceleration. Melamine-formaldehyde (MF) microcapsules containing LO were also prepared and treated on fabrics for comparison. PVAc nanoparticles treated on PET fabric showed higher initial releasing amount, which was ascribed to the enhanced surface area. After 2 days of releasing, PET fabric treated with PVAc nanoparticles showed slower and more stable releasing profile and reached about 12 ppm of cumulative release after 16 days, which was under two thirds of that with MF microcapsules. PVAc nanoparticles can be used as an agent for durable aroma finishing of PET fabrics.