In vitro pre-exposure of Haemonchus contortus L3 to blood eosinophils reduces their establishment potential in sheep

Different authors have reported that eosinophils are capable of immobilising infective larvae of different species of nematodes in vitro. However, classifying larvae as mobile or immobile is so subjective that it does not always mean all apparently immobile larvae are dead or those that are mobile are capable of surviving further immune responses if administered to their natural hosts. The objective of this experimental study was therefore to substantiate the role of eosinophils in the killing of Haemonchus contortus infective larvae by comparing the infectivity in sheep of larvae that had been incubated with eosinophil-enriched cell suspensions with control larvae. Since it was not possible to isolate pure eosinophils from sheep blood, we were compelled to evaluate the effects of other blood cells contaminating our eosinophil-enriched suspensions. Although eosinophils and neutrophils were the only cells found adherent to H. contortus infective larvae in vitro, induced eosinophils in the presence of immune serum were primarily responsible for the drastic reduction in larval motility compared to the minor effects of neutrophils and mononuclear cells. Corresponding reductions in faecal egg count and worm numbers were observed when the incubated larvae were transferred intra-abomasally to sheep. Interestingly, the proportion of larvae that failed to establish was much higher following incubation with induced eosinophils compared with other cells or with immune serum alone. Although this study did not address the in vivo role of eosinophils in sheep, the results strongly indicate that sheep blood eosinophils have a larval killing potential in vitro, and a larval mobility test alone may not fully explain the level of damage inflicted on the larvae.     

Potential spread of the pine processionary moth in France: preliminary results from a simulation model and future challenges

Context

Some forest insect pests are currently extending their range as a consequence of climate warming. However, in most cases, the evidence is mainly based on correlations and the underlying mechanism is not clearly known.

Aims

One of the most severe pests of pine forests in Europe, the pine processionary moth, Thaumetopoea pityocampa, is currently expanding its distribution as a result of climate warming and does not occupy entirely its potential habitat. A model describing its spread was developed to simulate its potential range in France under various climate change scenarios.

Methods

The spread model was divided into several sub-models to describe the growth, survival and dispersal of the species. The model was validated on the observed change of species distribution, its sensitivity was tested, and spread scenarios were simulated for the future.

Results

The model shows that climate warming initiated the species range expansion in France since the early 1990s. The spread is now limited by dispersal capability, but human-mediated dispersal could accelerate the range expansion.

Conclusion

Species range expansion is an indicator of climate change. However, time lags can appear due to limited dispersal capabilities, and human-mediated dispersal could create satellite colonies and artificially accelerate the spread.     

Capacity prediction of welded timber joints

Linear vibration welding of timber structural elements provides new opportunities to potentially achieve structural joints. This paper investigates to which extent welded joints can be considered for load-bearing structural joints. On the basis of a series of experimental and numerical investigations on a series of welded single-lap joints, failure modes were identified, and the associated failure criterion was quantified. A probabilistic method subsequently allowed accurately predicting the capacity of the tested wood welded joints exclusively based on objective input data, including an estimate of the scattering due to the material’s inherent variability.     

Competing Visions: Domestic Forests, Politics and Forest Policy in the Central Western Ghats of South India

Rural people in developing countries including India continue to access a number of types of ‘forests’ to meet specific needs such as fuelwood, fodder, food, non-timber forest produce and timber for both subsistence and income generation. While a plethora of terms exist to describe the types of forests that rural people use—such as farm forests, social forests, community forests and small-scale forests—the expression domestic forest has recently been proposed. Domestic forest is a term aimed at capturing the diversity of forests transformed and managed by rural communities and a way to introduce a new scientific domain that recognises that production and conservation can be reconciled and that local communities can be effective managers. This paper argues in the context of the central Western Ghats of south India that while the domestic forest concept is a useful umbrella term to capture the diversity of forests used by rural people, these domestic forests are often not autonomous local forests but sites of contestation between local actors and the state forest bureaucracy. Hence, a paradigm shift within the forest bureaucracy will only occur if the scientific forestry community questions its own normative views on forest management and sees forest policy as a means to recognise local claims and support existing practices of forest dependent communities.     

Inverse models to analyze the spatiotemporal variations of chemical weathering fluxes in a granito-gneissic watershed: Mule Hole, South India

Water-rock reactions are driven by the influx of water, which are out of equilibrium with the mineral assemblage in the rock. Here a mass balance approach is adopted to quantify these reactions. Based on field experiments carried out in a granito-gneissic small experimental watershed (SEW), Mule Hole SEW (~ 4.5 km²), quartz, oligoclase, sericite, epidote and chlorite are identified as the basic primary minerals while kaolinite, goethite and smectite are identified as the secondary minerals. Observed groundwater chemistry is used to determine the weathering rates, in terms of ‘Mass Transfer Coefficients’ (MTCs), of both primary and secondary minerals.Weathering rates for primary and secondary minerals are quantified in two steps. In the first step, top red soil is analyzed considering precipitation chemistry as initial phase and water chemistry of seepage flow as final phase. In the second step, minerals present in the saprolite layer are analyzed considering groundwater chemistry as the output phase. Weathering rates thus obtained are converted into weathering fluxes (Q_weathering) using the recharge quantity.Spatial variability in the mineralogy observed among the thirteen wells of Mule Hole SEW is observed to be reflected in the MTC results and thus in the weathering fluxes. Weathering rates of the minerals in this silicate system varied from few 10 μmol/L (in case of biotite) to 1000 s of micromoles per liter (calcite). Similarly, fluxes of biotite are observed to be least (7 ± 5 mol/ha/yr) while those of calcite are highest (1265 ± 791 mol/ha/yr). Further, the fluxes determined annually for all the minerals are observed to be within the bandwidth of the standard deviation of these fluxes. Variations in these annual fluxes are indicating the variations in the precipitation. Hence, the standard deviation indicated the temporal variations in the fluxes, which might be due to the variations in the annual rainfall. Thus, the methodology adopted defines an inverse way of determining weathering fluxes, which mainly contribute to the groundwater concentration.     

Andean potato cultivars (Solanum tuberosum L.) as a source of antioxidant and mineral micronutrients

Potato tubers were evaluated as a source of antioxidants and minerals for the human diet. A genetically diverse sample of Solanum tuberosum L. cultivars native to the Andes of South America was obtained from a collection of nearly 1000 genotypes using microsatellite markers. This size-manageable collection of 74 landraces, representing at best the genetic diversity among potato germplasm, was analyzed for iron, zinc, calcium, total phenolic, total carotenoid, and total vitamin C contents. The hydrophilic antioxidant capacity of each genotype was also measured using the oxygen radical absorbance capacity (ORAC) assay. The iron content ranged from 29.87 to 157.96 microg g-1 of dry weight (DW), the zinc content from 12.6 to 28.83 microg g-1 of DW, and the calcium content from 271.09 to 1092.93 microg g-1 of DW. Total phenolic content varied between 1.12 and 12.37 mg of gallic acid equiv g-1 of DW, total carotenoid content between 2.83 and 36.21 microg g-1 of DW, and total vitamin C content between 217.70 and 689.47 microg g-1 of DW. The range of hydrophilic ORAC values was 28.25-250.67 micromol of Trolox equiv g-1 of DW. The hydrophilic antioxidant capacity and the total phenolic content were highly and positively correlated (r = 0.91). A strong relationship between iron and calcium contents was also found (r = 0.67). Principal component analysis on the studied nutritional contents of the core collection revealed that most potato genotypes were balanced in terms of antioxidant and mineral contents, but some of them could be distinguished by their high level in distinct micronutrients. Correlations between the micronutrient contents observed in the sample and the genetic distances assessed by microsatellites were weakly significant. However, this study demonstrated the wide variability of health-promoting micronutrient levels within the native potato germplasm as well as the significant contribution that distinct potato tubers may impart to the intake in dietary antioxidants, zinc, and iron.     

Antioxidant profiling of native Andean potato tubers (Solanum tuberosum L.) reveals cultivars with high levels of beta-carotene, alpha-tocopherol, chlorogenic acid, and petanin

The antioxidant profile of 23 native Andean potato cultivars has been investigated from a human nutrition perspective. The main carotenoid and tocopherol compounds were studied using high-performance liquid chromatography coupled with a diode array detector (HPLC-DAD) and a fluorescence detector, respectively, whereas polyphenols (including anthocyanins in colored tubers) were identified by means of both HPLC-mass spectrometry and HPLC-DAD. Antioxidant profiling revealed significant genotypic variations as well as cultivars of particular interest from a nutritional point of view. Concentrations of the health-promoting carotenoids, lutein and zeaxanthin, ranged from 1.12 to 17.69 microg g(-1) of dry weight (DW) and from 0 to 17.7 microg g(-1) of DW, with cultivars 704353 and 702472 showing the highest levels in lutein and zeaxanthin, respectively. Whereas beta-carotene is rarely reported in potato tubers, remarkable levels of this dietary provitamin A carotenoid were detected in 16 native varieties, ranging from 0.42 to 2.19 microg g(-1) of DW. The amounts of alpha-tocopherol found in Andean potato tubers, extending from 2.73 to 20.80 microg g(-1) of DW, were clearly above the quantities generally reported for commercial varieties. Chlorogenic acid and its isomers dominated the polyphenolic profile of each cultivar. Dark purple-fleshed tubers from the cultivar 704429 contained exceptionally high levels of total anthocyanins (16.33 mg g(-1) of DW). The main anthocyanin was identified as petanin (petunidin-3-p-coumaroyl-rutinoside-5-glucoside). The results suggest that Andean potato cultivars should be exploited in screening and breeding programs for the development of potato varieties with enhanced health and nutritional benefits.     

Use of a Plackett-Burman experimental design to examine the impact of extraction parameters on yields and compositions of pectins extracted from chicory roots (Chicorium intybus L.)

Chicory root pectin was isolated by acid extraction followed by alcohol precipitation. Because the extraction conditions have important effects on the features of pectins, an experimental design was used to study the influence of 17 different extraction parameters on yield and composition of pectin: pH, temperature, time of extraction, solid/liquid ratio, and different pretreatments of the pulps before extraction. Twenty extractions were conducted and examined for their significance on yield and sugar content using the Plackett-Burman factorial design. The acid extraction of chicory roots resulted in an average yield of 11% containing 86% of sugars. It was found that extraction temperature, time, protease pretreatment, water purity, and water washing of pulps significantly affected yield and pectin composition with an increase of yield and purity of pectin in harsher extraction conditions.