Verification of mean volume backscattering strength obtained from acoustic Doppler current profiler by using sound scattering layer

ABSTRACT:   Acoustic Doppler current profilers (ADCPs) have recently been used to estimate the dynamic characteristics and biomass of sound scattering layers (SSLs) or swimming speed of fish schools and to analyze SSL spatial distribution or various behavior patterns. This paper shows that it is necessary to verify mean volume backscattering strength (MVBS, dB) values acquired from each beam for quantitative analysis of the spatial distribution or the biomass estimates of such specific targets as SSL or a fish school when using an ADCP. In this study, the SSL was selected to be a homogeneous density layer over a large area and two methods were used to verify the MVBS values from each beam of the ADCP. First, a mutual comparison among four beams was conducted after calculating MVBS from the measured echo intensity. Second, the MVBS values were verified using comparison between the calculated MVBS from the 153.6 kHz ADCP and MVBS from three frequencies of a well-calibrated scientific echosounder. Moreover, the dominant scatterers (euphausiids) were collected by a framed midwater trawl. From these samples, biological data were used to identify the different frequency characteristics between two systems, using a distorted-wave Born approximation (DWBA) theoretical backscattering model in order to assess the averaged target strength and target strength TS differences for the three frequencies.     

The effect of temperature on the energy budget of the Manila clam, <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis>

In this study, the energy budget of the Manila clam, Ruditapes philippinarum, was evaluated after one-week acclimation periods at 5, 10, 15, 20, and 25°C. Small clams (151 ± 12 mg DW) and large clams (353 ± 16 mg DW) were fed with the microalgae, Isochrysis galbana. Filtration rate, ingestion rate, assimilation efficiency, oxygen-consumption rate, and ammonia excretion rate were measured. Both filtration rate and ingestion rate of small and large clams were found to be related to temperature. The highest Q ₁₀ values were measured in the range 15–20°C for both small and large clams. Assimilation efficiency of both small and large clams was not significantly influenced by temperature, although the maximum mean values were detected at 20°C. Oxygen consumption rate and ammonia excretion rate of small and large clams were found to be related directly to temperature over the entire range, with a maximum being detected at 25°C. The highest Q ₁₀ value was estimated in the range 10–15°C with regard to oxygen consumption rate, and in the range of 15–20°C with regard to ammonia excretion rate. Scope for growth (SFG) was positive at all temperatures, achieving a maximum value at 20°C in both small and large clams, primarily as a consequence of the enhanced ingestion rate which offset the concomitant elevation in the metabolic rate. In this study we have estimated the thermal optimum for this species at 20°C.     

Effects of dietary macronutrient level and feeding frequency on growth and body composition of juvenile rockfish (Sebastes schlegeli)

An 8-week feeding experiment was conducted to investigate the effects of different dietary macronutrient level and feeding frequency on the growth, feed utilization, and body composition of juvenile rockfish. Triplicate groups of fish (body weight of 4.1 g) were fed the experimental diets containing either high levels of carbohydrate (HC, 35%), lipid (HL, 13%), or protein (HP, 55%) at different feeding frequencies (twice daily, once daily, and once every 2 days). Weight gain was affected by feeding frequency but not by dietary composition. Weight gain of fish fed the diets once every 2 days was significantly (P < 0.05) lower than that of other groups. Daily feed intake and energy intake were affected by both dietary composition and feeding frequency. Daily feed intake of fish fed the HC diet was significantly (P < 0.05) higher than that of fish fed the HL and HP diets at the same feeding frequency. Feed efficiency and protein efficiency ratio were affected by both dietary composition and feeding frequency and decreased with increasing feeding frequency in the same dietary composition. Feed efficiency and protein efficiency ratio of fish fed the HC diet were significantly (P < 0.05) lower than those of fish fed the HL diet at the same feeding frequency. Whole-body lipid content of fish fed the HL diet was significantly (P < 0.05) higher than that of fish fed the HC and HP diets at the same feeding frequency. These results indicate that an increase of dietary lipid level compared with dietary carbohydrate level may have the advantage of a protein-sparing effect at same feeding frequency, and a once-daily feeding regime is more effective than twice daily or one feeding every 2 days to improve growth performance of juvenile rockfish grown from 4 to 21 g.     

Immobilization antigen-independent protection of olive flounder (Paralichthys olivaceus) against Philasterides dicentrarchi (Ciliophora: Scuticociliatia) infection

To determine whether olive flounder (Paralichthys olivaceus) immunized with lysate of Philasterides dicentrarchi could be protected immobilization antigen (i-antigen) type independently, fish were immunized with lysate of ciliates obtained from in vitro cultures or ciliates obtained from infected fish. Fish immunized with ciliates obtained from infected fish were completely protected against artificial infection with in vitro cultured P. dicentrarchi, in spite of a weak or no serum agglutination activity against in vitro cultured ciliates. The present results indicate that i-antigen-independent protection was elicited by immunization of fish with the ciliates lysate, and the cultured ciliates would provide a good source for preparation of vaccines, which are cross-protective against various i-antigen types of P. dicentrarchi.     

Electrical properties of graphene/waterborne polyurethane composite films

Graphene is classified as a carbon-based material. Structurally, graphene is made up of carbon-based two-dimensional atomic crystals and a one atom thick planar sheet of sp²-bonded carbon atoms. This sort of arrangement in graphene makes it a unique material with exceptional mechanical, physicochemical, thermal, electrical, optical, and biomedical properties. Methods for graphene-based fabric production mainly use graphene-based materials such as graphene (G), graphene oxide (GO), and reduced graphene oxide (rGO) coated on fabric or yarn. Waterborne polyurethane (WPU) is one of the most rapidly developing and active branches of polyurethane chemistry. More and more attention is being paid to graphene-coated fabrics owing to their low temperature flexibility, the presence of zero or very few VOCs (volatile organic compounds), water resistance, pH stability, superior solvent resistance, excellent weathering resistance, and desirable chemical and mechanical properties. It is used as a coating agent or adhesive for fibers, textiles, and leather. Also, graphene-containing materials have been used to enhance the properties of WPU. In this study, graphene/WPU composite solution and film was prepared to conduct basic research for developing electrical heating textiles which is not harmful to the human body, flexible and excellent in electrical properties. Graphene/WPU composite solutions were prepared with a graphene content of 0, 2, 4, 8, and 16 wt%, and graphene/WPU film was prepared with solution casting method. The graphene contents were analyzed for their surface morphology, electrical properties, and electrical heating properties.     

Fabrication of electropsun PLGA and small intestine submucosa-blended nanofibrous membranes and their biocompatibility for wound healing

In recent decades, tremendous research has focused on the production of nanoscale fibers using synthetic polymers, with the goal of fabricating nanofibrous scaffolds for wound healing. However, the hydrophobicity of such polymers typically hinders attachment and proliferation of the cells. In this study, we combined poly-d,l-lactide-co-glycolide (PLGA) and small intestine submucosa (SIS) to fabricate blended nanofibers for wound healing by electrospinning. PLGA and SIS were dissolved in 1,1,1,3,3,3-hexafluoro isopropanol to produce different weight ratios of PLGA/SIS-blended nanofibrous membranes (NFM). Physicochemical characterization of the electrospun NFM was performed by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, water contact angle analysis, degradation test and tensile testing. The PLGA/SIS-blended NFM showed improved hydrophilicity and tensile strength. Better infiltration, attachment and proliferation of rat granulation fibroblasts of PLGA/SIS-blended NFMs compared to PLGA NFMs were identified by morphological differences determined by SEM and a water-soluble tetrazolium salt assay kit. Based on our results, the PLGA/SIS blended NFMs were found to be suitable for use as a potential material for wound dressing.     

Directly-prelithiated carbon nanotube film for high-performance flexible lithium-ion battery electrodes

Carbon nanotube (CNT) films are very flexible and serve as active materials for lithium-ion batteries (LIBs). Hence, they have high potential as flexible free-standing electrodes for wearable batteries. However, nanocarbon materials such as CNTs and graphene are of limited use as electrodes because they have a large initial irreversible capacity due to the formation of a solid electrolyte interphase (SEI). Herein, we prelithiated the CNT films to make them available as electrodes for flexible batteries by reducing their irreversible capacity. The SEI is pre-formed through a direct prelithiation (DP) method that brings lithium metal into direct contact with CNT films in an electrolyte. As a result, the capacity of directly-prelithiated CNT film electrodes continues to increase to 1520 mAh/g until 350th cycle of charge/discharge and their initial irreversible capacity vanishes. The changes in the electrochemical properties of CNT film electrodes by DP treatment and their flexibility are investigated.     

Isolation and characterization of nanocrystalline cellulose from different precursor materials

Nanocrytalline cellulose (NCC) was isolated using cellulose extracted from two different precursor materials: Eucalyptus globulus and rice straw. The two ground precursor materials were autoclaved with a 10 % NaOH solution at 120 °C for 3 h. The alkali-treated precursor materials were bleached using sodium chlorite/acetic acid and sodium hypochlorite. The bleached precursor materials were acid-hydrolyzed in 65 % (w/w) sulfuric acid at 45 °C for 30-120 min. The changes in the chemical composition of the two precursor materials were studied before and after bleaching by Fourier transform infrared spectroscopy according to the NREL report and TAPPI standards. Hydrolyzates were characterized by X-ray diffractometry, thermogravimetric analysis, Zeta-potential analysis, and transmission electron microscopy. The results revealed that the physical properties of NCC were strongly dependent on the acid-hydrolysis time.     

Synthesis of hydrophobic anthraquinoid magenta dyes having linear alkyl substituents

A new series of magenta dyes having different length of alkyl substituents was synthesized to dye unmodified polypropylene (PP) and ultra-high molecular weight polyethylene (UHMWPE) fiber. It could be concluded that the affinity of the dyes onto unmodified PP and UHMWPE fibers was increased with the increase of the length of alkyl substituents. The optimum length of alkyl group was determined as the longest dodecyl-substituted dye in this study. Their absorption spectra appeared almost the same at visible range, which meant that the length of alkyl substituents did not affect the color appearance of the dyes. The color fastness properties of the dyeings to washing, rubbing and light were good enough for commercialization.     

Molecular markers for improving control of soil-borne pathogen <Emphasis Type="Italic">Fusarium oxysporum</Emphasis> in sugar beet

Fusarium spp. cause severe damage in many agricultural crops, including sugar beet, with Fusarium oxysporum historically being considered as the most damaging of all species. Sugar beet needs to be protected from this class of soil-borne pathogens in order to ensure an optimal sugar yield in the field. Genetic control of the disease is crucial in managing these pathogens. Identification of single nucleotide polymorphism (SNP) markers linked to resistance can be a powerful tool for the introgression of valuable genes needed to develop Fusarium-resistant varieties. A candidate gene approach was carried out to identify SNP markers linked to putative Fusarium resistance sources in sugar beet. Five resistant analogue genes (RGAs) were screened by means of high resolution melting (HRM) analysis in a set of sugar beet lines, considered as resistant and susceptible to Fusarium oxysporum. HRM polymorphisms were observed in 80% of amplicons. Two HRM polymorphisms were significantly associated with Fusarium resistance (P < 0.05). The amplicons that showed association were sequenced and two SNPs were identified. The association was further validated on 96 susceptible and 96 resistant plants using competitive allele-specific PCR (KASPar) technology. The selected SNPs could be used for marker-assisted breeding of Fusarium resistance in sugar beet.