Influence of oil type on the amounts of acrylamide generated in a model system and in French fries

Acrylamide formation was studied by use of a new heating methodology, based on a closed stainless steel tubular reactor. Different artificial potato powder mixtures were homogenized and subsequently heated in the reactor. This procedure was first tested for its repeatability. By use of this experimental setup, it was possible to study the acrylamide formation mechanism in the different mixtures, eliminating some variable physical and chemical factors during the frying process, such as heat flux and water evaporation from and oil ingress into the food. As a first application of this optimized heating concept, the influence on acrylamide formation of the type of deep-frying oil was investigated. The results obtained from the experiments with the tubular reactor were compared with standardized French fry preparation tests. In both cases, no significant difference in acrylamide formation could be found between the various heating oils applied. Consequently, the origin of the deep-frying vegetable oils did not seem to affect the acrylamide formation in potatoes during frying. Surprisingly however, when artificial mixtures did not contain vegetable oil, significantly lower concentrations of acrylamide were detected, compared to oil-containing mixtures.     

Short-term survival and dispersal of translocated European wild rabbits. Improving the release protocol

Translocation of European wild rabbit Oryctolagus cuniculus L. is one of the most frequent management tools to increase rabbit density in Spain, both as prey of several predators that are threatened with extinction and for sport hunting. Nevertheless the elevated short-term mortality by predation makes translocations unsuccessful and increases their biological cost. Information on the factors affecting the short-term survival and dispersal of translocated rabbits is required to improve release management and increase performance of translocated rabbits, and to avoid the use of non-selective lethal methods for predator control. In this study we tested electric fencing and night-shooting as alternative to traditional release protocols, and the effects of vegetation cover and warren fencing on short-term survival and dispersal of rabbits. Night shooting performed during the first nights after release increased significantly the survival of rabbits, by hindering the activity of carnivores in the release area. The use of an electric fence enclosure also increased the performance of rabbits, but was not efficient to constraint rabbit dispersal. Rabbits released in areas with low vegetation cover showed higher mortality and dispersal distances than rabbits released in high cover areas. Warren fencing decreased both the dispersal of rabbits and the adverse impact of predation in low cover areas, but had no effect in high cover areas. Selection of high cover areas or warren fencing in low cover areas seem to be the most advantageous release conditions to decrease the short-term predation impact, reducing the biological cost of rabbit translocations and the risks for endangered predators derived from the use of traditional predator control practices during translocations.     

Birds like it Corky: the influence of habitat features and management of ‘montados’ in breeding bird communities

In the southwest part of the Iberian Peninsula the dominant land-use are the Portuguese montados and Spanish dehesas, parkland forested areas of anthropogenic origin dominated by cork oak. They form a wooded matrix with open areas, scattered woodlands and undisturbed patches of Mediterranean forest and scrublands. The montados are characterized by a rich bird community. We have focus our study in a multidisciplinary approach, evaluating how management and landscape patterns influence the bird community in order to identify potential threats to its conservation. The study was conducted in the Site of Community Importance of Serra de Monfurado were 70% of the area is cork and holm oaks. We used data from 120 10-min point counts. Using variation partitioning, we determined the independent and joint effects of Forest, Management and Habitat variables. The variation captured in bird assemblage was 65.06%. Most of the explained variation was related to the Habitat and Management variables. The explanatory variables that were high-lighted as important predictors were variables that reflected tree and shrub density and cork removal. Modelling for forest species through generalized linear models (GLM) emphasize that the management plays an important role in the species distribution. The most important variables selected in models reflected cattle grazing and cork removal. Our results point out that the type of management is crucial to maintain the equilibrium in bird community associated to montados. Farmland and forest species will benefit from areas with different tree densities, small patches of Mediterranean scrubs in the understory and correct livestock numbers.     

The effect of aqueous extract of gross and commercial yerba mate (Ilex paraguariensis) on intra-abdominal and epididymal fat and glucose levels in male Wistar rats

This study analyzed the plasma lipid profile, glucose levels and fat deposits in male rats treated with aqueous extract of gross yerba mate, commercial yerba mate or water. Yerba mate treatment did not change body weight gain and lipid profile. The consumption of gross yerba mate significantly increased blood glucose (6.6 mmol/L) as compared to the water (4.8 mmol/L) and commercial group (5.2 mmol/L) and decreased epididymal and intra-abdominal deposits (10.1 mg/g and 23.7 mg/g of weight) as compared to the water (15.4 mg/g and 36.9 mg/g of weight) and commercial group (12.5 mg/g and 28 mg/g of weight). The results suggest that gross yerba mate reduces fat more efficiently but produces a greater increase in blood glucose when compared to commercial yerba mate and water groups.     

Determinants of yield in a non-timber forest product: Copaifera oleoresin in Amazonian extractive reserves

Developing sustainable extractive industries in otherwise intact tropical forest regions requires a sound understanding of the production potential of key resource populations. The oleoresin extracted from Copaifera trees is an economically important non-timber forest product harvested throughout the lowland Amazon basin. We studied oleoresin extraction from four species of Copaifera trees with known harvest histories within two contiguous extractive reserves in western Brazilian Amazonia. We conducted a large-scale experimental harvest of 179 previously unharvested Copaifera trees, in both seasonally flooded (várzea) and adjacent unflooded (terra firme) forests. The likelihood of trees yielding any oleoresin was principally determined by their species identity: C. multijuga was the only species to regularly yield oleoresin (70% of trees). Yield volumes varied both amongst species and forest types: C. multijuga (restricted to terra firme forest) had the highest mean yield of 505 ml, whilst C. guyanensis produced higher volumes of oleoresin in várzea (139 ml) than terra firme (15 ml) forest. Intraspecific differences were driven mainly by tree size. To assess extraction sustainability, we reharvested a sample of C. multijuga trees and compared the oleoresin production of 24 conspecific trees that had been initially harvested one year previously with that of 17 trees initially harvested three years previously. Reharvested trees produced just 35% of the oleoresin volume compared to that when originally drilled, but this response was not affected by the time interval between consecutive harvests. We demonstrate that, within a population of Copaifera, both morphological and environmental factors restrict total productivity; consideration of these factors should inform sustainable management practises. We additionally raise methodological considerations that may improve the comparability of studies.     

Long term effects of fire on ectomycorrhizas and soil properties in Nothofagus pumilio forests in Argentina

The forests of Nothofagus pumilio have historically been affected by forest fires. The effects of fire on certain above and belowground, biotic and abiotic components of these ecosystems have been previously documented, albeit belowground components have received much less attention. It has been suggested that the effects observed in the short-term after a fire usually differ from the longer-term effects. The long-term effects of fire (i.e. >5 years after burning) on belowground components in Nothofagus forests are currently unknown. In the present study we evaluated the long-term effect of fire on ectomycorrhiza (ECM) colonization and morphotype composition in N. pumilio roots, as well as soil chemical properties in temperate forests in Patagonia. Sampling was conducted in three mature monospecific forests. In each, nearby burned and unburned sites were selected. The time since the occurrence of fires differed between areas (i.e. 6-10 years). Within each site, 3 transects of 40 m were established randomly along which 5 samples of roots and soil were collected in spring and autumn. The main results were: (1) in comparison with the unburned site, ECM colonization was lower in the burned site in the area with the shorter time length since fire occurrence and no effects in the other two areas were observed; (2) richness and diversity were not significantly affected by fire but there was a significant effect of season for both parameters, being higher in spring; (3) ECM dominance was significantly higher in the unburned than in the burned site in Tronador, while in Challhuaco the opposite was observed, mainly in autumn; (4) in general carbon, nitrogen and phosphorous decreased while pH increased in the burned sites; (5) ECM colonization positively correlated with NH⁴⁺ and phosphorus and negatively with pH but was not significantly correlated with organic matter or any other soil variable. Altogether the results suggest that effects of fire on ectomycorrhiza and soil properties in N. pumilio forests are probably related to the time elapsed since fire occurrence combined with site characteristics. In addition, the direct and indirect effects of fire in these forest systems may persist for more than 10 years.     

Can Non-fumigant Nematicides Be an Alternative to Fumigation on Carrot Fields?

ABSTRACT

Root-knot nematodes (RKN; Meloidogyne spp.) cause enormous yield reductions in vegetable crops. While nematicides are the most effective method for controlling RKN in carrot (Dacatus carota), the efficacy of non-fumigant nematicides, compared to fumigants, is still not fully understood. The objective of this study was to evaluate the effect of 1,3-dichloropropene, a fumigant nematicide, and fluensulfone, a non-fumigant nematicide, on RKN control and yield of fresh market and processing carrot. Field experiments were conducted in a commercial farm in Lenox, GA. A randomized complete block design (r = 4) was used in a factorial arrangement of 3 nematicide treatments and 2 carrot cultivars. Nematicide treatments were the application of 1,3-dichloropropene, fluensulfone, and untreated control. Carrot cultivars were Baltimore (fresh marketing) and Belgrado (processing). In general, RKN population was low early season, averaging 0.8 RKN 100 cm^?3 of soil. RKN populations increased with crop development and there were significant differences among nematicide treatments. At harvest, RKN populations were lower for fluensulfone (1.1 RKN 100 cm^?3 of soil) and 1,3-dichloropropene (3.2 RKN 100 cm^?3 of soil) compared to Control (26.4 RKN 100 cm^?3 of soil); however, fluensulfone (91,278 kg ha^?1) had higher yield than 1,3-dichloropropene (64,154 kg ha^?1) and Control (61,908 kg ha^?1). Carrot cultivars were similar for RKN population and yield. Overall, the non-fumigant nematicide was more beneficial for carrot production than the fumigant nematicide.     

Fluorescence, browning index, and color in infant formulas during storage

Free and total fluorescent compounds, browning index, and color formation were measured in milk-based powdered infant formulas (IF) during 2 years of storage at 20 and 37 degrees C. The excitation spectra from 415 nm emission show three peaks (ex lambda1 = 270 nm, lambda2 = 325/315 nm, lambda3 = 350 nm) and from 347 nm excitation two emission peaks (415 and 520 nm), and no wavelength shifts were observed. Temperature and time of storage exert in general no significant effect on the development of fluorescence emission intensity and browning index. However, an important increase in pentodilysine was recorded-probably because of the iron and ascorbic acid contents of the samples-as well as in browning index in adapted IF. In both IF a color increase (deltaE) throughout storage was observed, this increase being greater in samples stored at 37 degrees C than in those stored at 20 degrees C. The increase in color with time fitted a linear regression model. Color appeared to be an indicator of sufficient sensitivity to measure the effect of temperature or storage time.     

On-site remediation of chromium-contaminated sediments by combination of sediment washing and stabilization with magnesium oxide/limestone mixtures

Goal, Scope and Background  The remediation of heavy-metalcontaminated soils and sediments is of significant value to industrial areas around the world. The spread of such pollutants can result in a potential risk of entering the groundwater system and being transported to potential receptors. Leaching techniques can be an effective treatment option for the metal removal from soils and sediments. This approach consists of washing or leaching the contaminated soil with an appropriate reagent and the subsequent treatment of the leaching in an above-ground installation (on-site treatment) where metals can be removed and concentrated into a smaller volume. Among the heavy metals, chromium is a commonly identified soil contaminant, particularly in sites with intensive economic activities including agriculture, industrial, mining and mineral,processing. Objective  The objective of this work was the evaluation and development of a leaching process for the remediation of soils and sediments polluted with chromium at laboratory scale. Chromium soil pollution was generated after the breakdown of a channel containing chromium wastes from a tannery plant. The pollution extension has been estimated to be on the order of thousands of tonnes of soil to be treated, with chromium contents ranging from 500 to 17,000 mg kg^-1 soil. Methods  The whole process investigated in this study integrates three stages; a) chromium leaching from a sediment using a diluted sulphuric acid solution, b) treatment of the leaching effluents with a magnesium oxide/limestone mixture for the precipitation of chromium hydroxide after acidity neutralisation, and c) polishing step to remove the eventual remaining chromium by adsorption onto natural zeolite. The amount of contaminated sediment treated ranged from 0.5 to 2 kg with chromium contents of between 2000 and 17,000 mg kg^-1. Results and Discussion  The paper describes results on the performance of the process and the optimisation of steps including influence of acid sulphuric concentration, chromium removal efficiency as well as alkaline reactive mixture proportions. Effluents from the leaching cells showed a significant decay on the chromium concentration with the increase of leaching runs and a high content of acidity (pH values close to 0.5). The treatment of these effluents in a second cell containing magnesium oxide/ limestone mixtures resulted in a high efficiency in neutralisation of acidity (pH values around 7) and chromium removal (concentrations below 5 mg 1^-1). The passage through a third compartment containing zeolite as an adsorbent decreased the chromium concentration below 0.5 mg 1^-1, Conclusions  From the results obtained on the chromium leaching and immobilisation with magnesium oxide/limestone mixture at a laboratory scale, it could be pointed out that: (a) diluted sulphuric acid solutions (3%) demonstrated a high efficiency on chromium removal from sandy polluted soils on the kilogram scale, (b) mixtures of magnesium oxide/limestone demonstrated a high capacity to neutralise the residual high acidity present on the effluents and to remove chromium by precipitation and (c) between the limestone and caustic magnesia mixtures, those containing more than 60% of caustic magnesia provide the higher efficiency. Recommendation and Outlook  Future work would be directed to the evaluation of the integrated process of leaching and chromium precipitation on column at a scale of 100 to 1000 kg.     

Prediction chemical composition and alveograph parameters on wheat by near-infrared transmittance spectroscopy

Moisture, protein, wet gluten, dry gluten, and alveograph parameters (W, P, and P/L) of whole wheat grown in different countries around the world were analyzed using near infrared (NIR) transmittance spectroscopy. Modified partial least squares on NIR spectra (850-1048.2 nm) were developed for each constituent or physical property. The best models were obtained for protein, moisture, wet gluten, and dry gluten with r(2) = 0.99, 0.99, 0.95, and 0.96, respectively. Initial alveograph NIR models proposed for all wheat samples did not perform well. However, when wheat samples were divided in two groups depending on W (deformation energy) values, NIR models were highly improved, showing enough prediction accuracy for screening wheat at the receiving stage at mills or elevators.