Bread wheat cultivar PBW 343 carries residual additive resistance against virulent stripe rust pathotype

With continuous outbreaks of stripe rust (Puccinia striiformis f. sp. tritici) epidemics and rapid breakdown of deployed resistance in bread wheat (Triticum aestivum L.) cultivars in North West Plains Zone (NWPZ) in India warrant knowledge and deployment of new and durable sources of resistance to stripe rust. Bread wheat cultivar PBW 343, until recently the most widely cultivated wheat variety in India, is now highly susceptible to stripe rust (score 9 on a 1–9 scale), whereas PBW 621 (score 5.05–5.65) and HD 2967 (score 5.40–6.20) show low levels of resistance. We conducted an experiment, spanning three crop seasons (2013–2014 to 2015–2016), in which parental lines, F₁ and F₂ populations, F₃ and F₄ families from two bread wheat crosses, PBW 621/PBW 343 and HD 2967/PBW 343 were generated and evaluated for stripe rust resistance against a virulent pathotype. While the F₁ revealed partial dominance, the segregation pattern for stripe rust resistance in F₂ and F₃ showed transgressive segregation for resistance in both crosses. Chi-square analysis indicated that resistant segregants possessed two genes, one contributed by PBW 621 or HD 2967 (depending on the cross) and the other, unexpectedly but obviously, came from the most susceptible cultivar, PBW 343. Possible genetic mechanisms for this residual resistance and implications for breeding programs are discussed.     

Effectiveness of Combined Use of Mineral Oil and Insecticide Spray in Reducing <Emphasis Type="Italic">Potato Virus Y</Emphasis> (PVY) Spread under Field Conditions in New Brunswick,Canada

In the 2014 and 2015 crop seasons, the efficacies of different types, rates and combinations of mineral oil and insecticide foliar sprays for reducing Potato virus Y (PVY) spread were tested in controlled field trials in New Brunswick (NB), Canada. Experimental plots were planted with certified PVY-free Goldrush, supplemented with known virus-infected seed to raise PVY inoculum to 2.3% and 3% at the beginning of the 2014 and 2015 seasons, respectively. Treatments consisted of mineral oil-only sprays at different application rates, insecticide-only sprays of differing numbers, and several combined mineral oil and insecticide spray regimes, all compared to a no-spray control treatment. PVY spread to 18% (2014) and 22% (2015) of initially virus-free plants in no-spray control plots, with significant reductions observed in PVY spread in several treatments. Greatest PVY reductions, as low as 4% (2014) and 12% (2015), were in combined mineral oil and insecticide spray treatments, followed by oil-only sprays; while insecticide-only sprays did not significantly reduce PVY spread. As well as measuring PVY spread to marked test plants and randomly collected post-harvest tuber sample from the plots, exhibited similar treatment pattern for PVY incidence. Multiple logistic regression modeling confirmed the relative efficacy of combined oil and insecticide sprays for reducing PVY spread, while accounting for variable inoculum and aphid factors. Modeling also highlighted the importance of planting low-PVY seed initially, and of early application of foliar sprays. Local best management practice recommendations for reduction of in-field PVY spread were discussed.     

Integrated effect of population and weed management regimes on weed dynamics,performance, and productivity of basmati rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Weeds caused serious problem on yield reduction of basmati rice worldwide. Losses caused by weeds varied from one country to another, depending on the presence of dominant weeds and the control methods practiced by farmers; therefore, suitable plant population and weed management practices should be adopted. Keeping these in mind, a field experiment was carried out during kharif seasons of 2009 and 2010 at crop Research Centre of SVPUA&T, Meerut, India comprising 4 planting geometries, viz. 20, 30, 40, and 50 hills m^?2 as main plot factor, and 5 weed management practices (Butachlor @ 1.0 kg ha^?1, Butachlor @ 1.0 kg ha^?1 fb (followed by) one hand weeding, Butachlor @ 1.0 kg ha^?1 fb Almix @ 4 g ha^?1, two hand weedings and weedy check) in a split plot design with 3 replications. Experimental results revealed that plant population of 50 hills m^?2 proved superior over that of 20 hills m^?2 in respect of weed density, weed dry weight, number of tillers m^?2, yield attributes, grain, straw, and biological yields. The maximum grain yield (29.00 and 31.00 q ha^?1) and straw yield (51.30 and 52.50 q ha^?1) were recorded in 50 hills m^?2 followed by 40 hills m^?2 during 2009 and 2010, respectively. In respect of nitrogen, phosphorus, and potassium removal, a reverse trend was observed: the highest in 20 hills m^?2 followed by 30, 40, and 50 hills m^?2. As far as the weed management practices are concerned, both chemical and mechanical methods of weed control were found superior over weedy check. The lowest weed density, dry weight, and highest weed control efficiency, maximum length of panicle^?1, number of panicle (m²), and 1000-grain weight and grain yield of 30.40 and 32.60 q ha^?1 were recorded with two hand weedings which was at par with Butachlor @ 1.0 kg ha^?1 fb one hand weeding over rest of the weed management practices.     

Mapping QTLs using a novel source of salinity tolerance from Hasawi and their interaction with environments in rice

Background

Salinity is one of the most severe and widespread abiotic stresses that affect rice production. The identification of major-effect quantitative trait loci (QTLs) for traits related to salinity tolerance and understanding of QTL × environment interactions (QEIs) can help in more precise and faster development of salinity-tolerant rice varieties through marker-assisted breeding. Recombinant inbred lines (RILs) derived from IR29/Hasawi (a novel source of salinity) were screened for salinity tolerance in the IRRI phytotron in the Philippines (E1) and in two other diverse environments in Senegal (E2) and Tanzania (E3). QTLs were mapped for traits related to salinity tolerance at the seedling stage.

Results

The RILs were genotyped using 194 polymorphic SNPs (single nucleotide polymorphisms). After removing segregation distortion markers (SDM), a total of 145 and 135 SNPs were used to construct a genetic linkage map with a length of 1655 and 1662 cM, with an average marker density of 11.4 cM in E1 and 12.3 cM in E2 and E3, respectively. A total of 34 QTLs were identified on 10 chromosomes for five traits using ICIM-ADD and segregation distortion locus (SDL) mapping (IM-ADD) under salinity stress across environments. Eight major genomic regions on chromosome 1 between 170 and 175 cM (qSES1.3, qSES1.4, qSL1.2, qSL1.3, qRL1.1, qRL1.2, qFWsht1.2, qDWsht1.2), chromosome 4 at 32 cM (qSES4.1, qFWsht4.2, qDWsht4.2), chromosome 6 at 115 cM (qFWsht6.1, qDWsht6.1), chromosome 8 at 105 cM (qFWsht8.1, qDWsht8.1), and chromosome 12 at 78 cM (qFWsht12.1, qDWsht12.1) have co-localized QTLs for the multiple traits that might be governing seedling stage salinity tolerance through multiple traits in different phenotyping environments, thus suggesting these as hot spots for tolerance of salinity. Forty-nine and 30 significant pair-wise epistatic interactions were detected between QTL-linked and QTL-unlinked regions using single-environment and multi-environment analyses.

Conclusions

The identification of genomic regions for salinity tolerance in the RILs showed that Hasawi possesses alleles that are novel for salinity tolerance. The common regions for the multiple QTLs across environments as co-localized regions on chromosomes 1, 4, 6, 8, and 12 could be due to linkage or pleiotropic effect, which might be helpful for multiple QTL introgression for marker-assisted breeding programs to improve the salinity tolerance of adaptive and popular but otherwise salinity-sensitive rice varieties.

     

Frequency and fertility restoration efficiency of Rf3 and Rf4 genes in Indian rice

Identification of new parental lines is crucial for developing ecology‐specific hybrids with ideal agronomic performance. We screened a total of 570 different ecology‐specific Indian rice varieties for the presence of fertility restorer genes, Rf3 and Rf4 using tightly linked markers DRRM Rf3‐10 and RM6100, respectively. Among these varieties, 13% carried Rf3Rf3/Rf4Rf4, 31% carried rf3rf3/rf4rf4, 6% carried Rf3Rf3/rf4rf4 and remaining 50% carried Rf4Rf4/rf3rf3 allelic combinations. A mini set of 40 varieties with variable allelic combinations of fertility restorer genes were testcrossed with WA and Kalinga‐based CMS lines. All the 80 F₁s were evaluated for spikelet fertility and fertility restoration ability. Rf3Rf3/rf4rf4 genotypes mostly behaved as partial maintainers or partial restorers. In contrast, rf3rf3/Rf4Rf4 genotypes were partial or effective restorers. However, double dominant genotypes showed better fertility restoration than the genotypes containing Rf3 or Rf4 individually. Some of the genotypes showed unexpected restoration pattern implying occurrence of other fertility restorer(s) apart from Rf3 and Rf4. The perfect restorers and maintainers identified in this study can be directly used in hybrid rice breeding.     

Methane emission from two Indian soils planted with different rice cultivars

In a greenhouse study, methane emissions were measured from two diverse Indian rice-growing soils planted to five rice cultivars under similar water regimes, fertilizer applications and environmental conditions. Significant variations were observed in methane emitted from soils growing different cultivars. Total methane emission varied between 8.04 and 20.92gm^–2 from IARI soil (Inceptisol) and between 1.47 and 10.91gm^–2 from Raipur soil (Vertisol) planted to rice. In all the cultivars, emissions from IARI soil were higher than from Raipur soil. The first methane flux peak was noticed during the reproductive phase and the second peak coincided with the grain-ripening stage of the rice cultivars. Received: July 7, 1996     

Heavy Metal Contamination of Soil and Vegetation in the Vicinity of Industries in Bangladesh

Water, Air, &; Soil Pollution - A study was conducted to investigate the heavy metal contamination of soil and vegetation in the vicinity of industries around Dhaka city in Bangladesh....     

Heat-induced aggregation of whey proteins: comparison of cheese WPC with acid WPC and relevance of mineral composition

Heat-induced aggregation of whey proteins in solutions made from two commercial whey protein concentrates (WPCs), one derived from mineral acid whey (acid WPC) and the other from cheese whey (cheese WPC), was studied using polyacrylamide gel electrophoresis (PAGE), size exclusion chromatography (SEC), and transmission electron microscopy (TEM). Heat treatment (75 degrees C) of acid WPC solutions (12.0%, w/w, pH 6.9) resulted in formation of relatively small "soluble" aggregates that were predominantly disulfide-linked. By contrast, heat treatment of the cheese WPC solutions (under the same conditions) caused formation of relatively large aggregates, containing high proportions of aggregates linked by noncovalent associations. The rate of aggregation of both beta-lactoglobulin and alpha-lactalbumin at 75 degrees C, measured as the loss of native proteins by PAGE, was higher in the cheese WPC solution than in the acid WPC solution. Cross dialysis of the two WPC solutions resulted in alteration of the mineral composition of each WPC solution and reversing their heat-induced aggregation behavior. The results demonstrated that the mineral composition is very important in controlling the aggregation behavior of WPC products.     

Effect of Temperature on Bio-Kinetic Coefficients in UASB Treatment of Municipal Wastewater

Upflow anaerobic sludge blanket (UASB)reactors were used to treat municipal wastewater attemperatures of 6, 11, 15, 20 and 32 °C and athydraulic retention times (HRTs) ranging from 48 to 3 h overan operational period of approximately 860 days. The Monodmodel was used to evaluate substrate utilization. TheArrhenius model was used to calculate the activationenergies from which temperature coefficients weredetermined. It was found that the maximum specific substrateutilization rate constant (k) decreased from 0.387 d^-1(at 32 °C) to 0.041 d^-1 (at 6 °C). Thedecay rate constant (k_d), yield coefficient (Y_g),half velocity constant (K_s) and maximum specific growthrate (μ_m ) were also impacted by temperature in theUASB treatment of municipal wastewater.