Surface area processing in GIS for different mountain regions

Surface area is a fundamental parameter derived from terrain analysis in geographical information systems (GIS) for modeling the real world. Therefore, an evaluation of the techniques implemented by GIS models is important in order to obtain reliable area measurements. The study compares two raster-based methods with a TIN-based (triangulated irregular network) method for surface area approximation using a digital elevation model (DEM) with 25 m × 25 m resolution in six mountain regions of Shandong Province, China. Raster-based method Ⅰ calculates surface-area grids from DEMs directly. Eight 3-dimensional triangles connecting the center point of each cell with the center points of the eight surrounding cells are generated and then the areas of the portions of each triangle that lay within the cell boundary are calculated and summed. Raster-based method Ⅱ produces the surface area of each cell directly from the pixel size and the slope value for the pixel. The results demonstrate that the surface areas calculated by raster-based method Ⅰ are equal to those of the TIN-based method. The results of raster-based method Ⅱ are the lowest but the difference in areas between the two raster-based methods decreases with the decrease in terrain complexity. Compared to the method with TINs, raster-based method Ⅱ can do better because it has some advantages, such as neighborhood analysis, more consistent output and faster processing speed. The results also demonstrate that the difference between surface and horizontal areas should be considered if more than 30% of the area of a region has slopes steeper than 18.2 degrees.     

黑龙江省林业采运机械化发展变化及驱动力分析

林业机械化是实现林业现代化的基础,采运机械化是林业机械化的重要组成部分.黑龙江省是我国的重点国有林区和主要木材生产地之一,研究黑龙江省的采运机械化发展对于实现我国林业现代化具有重要意义.以黑龙江省森林工业统计资料为基础,对其采运机械化的发展变化进行分析.采用主成分分析法,在SPSS软件中定量计算,找出采运机械化发展的5个驱动因素,并认为驱动采运机械化发展的直接原因是生产成本等经济因素,而根本原因在于森林资源状况的变化.最后预测,未来几年黑龙江省采运机械化水平不会发生显著变化.     

晋西刺槐人工林Sloboda高生长模型

利用Sloboda多形指数曲线方程拟合了晋西方山县和吉县刺槐人工林的高生长模型。结果表明,模型在95%显著水平上通过检验,可用于试验区人工林收获预估和立地质量评价。将试验区坡向、坡位和部分地形按照优势木的高生长量由大到小的排序为:阳坡下部、阳坡凹地、阴坡中部、阳坡中部、半阴坡上部、阳坡上部、半阳坡中部、阴坡上部、峁顶、阳沟坡、半阳坡上部。     

中亚热带天然林改造成人工林后土壤呼吸的变化特征

【目的】研究中亚热带常绿阔叶林(天然林)改造成人工林后土壤碳排放量的变化及主要影响因子,为评估森林类型转换对土壤碳排放的影响提供科学依据。【方法】在福建农林大学西芹教学林场的常绿阔叶林及由其改造而来的38年生闽楠人工林与35年生杉木人工林中分别设置4块20 m×20 m样地,利用Li-8100土壤碳通量观测系统于2014年9月—2016年9月进行定点观测,并同期观测土壤温度、含水量、有机碳含量(SOC)、微生物生物量碳含量(MBC)、可溶性有机碳含量(DOC)、0～20 cm土层细根生物量和年凋落物量及凋落物碳氮比(C/N)。【结果】常绿阔叶林改造成闽楠(38年后)和杉木人工林(35年后),年均土壤碳排放通量由16. 22显著降为12. 71和4. 83 tC·hm^-2a^-1,分别减少21. 60%和70. 20%;各林分类型的土壤呼吸温度敏感性Q¹⁰值表现为常绿阔叶林(1. 97)<闽楠人工林(2. 03)<杉木人工林(2. 91),转换为杉木人工林后,Q¹⁰值显著升高(P<0. 05);土壤温度能分别解释常绿阔叶林、闽楠人工林与杉木人工林土壤呼吸速率变化的89. 70%、88. 50%和87. 90%,土壤呼吸速率和土壤含水量相关不显著(P>0. 05);土壤呼吸速率和SOC、MBC、DOC、年凋落物量及0～20 cm土层细根生物量均极显著正相关(P<0. 01);土壤呼吸温度敏感性指数Q¹⁰值和凋落物C/N极显著正相关(P<0. 01),而与年均土壤呼吸速率及MBC极显著负相关(P<0. 01);进一步分析发现土壤MBC和SOC含量是影响土壤呼吸速率的2个最重要因子,而凋落物C/N在影响土壤呼吸温度敏感性中的贡献最大。【结论】中亚热带地区常绿阔叶林改造成闽楠(38年)或杉木(35年)人工林后,土壤碳排放通量显著降低。林分类型转换后树种组成和林分结构发生改变,凋落物数量、质量及细根生物量显著降低,土壤SOC和MBC含量显著下降可共同导致土壤呼吸通量的下降。土壤温度是3种林分类型土壤呼吸季节变化的主导因素,而土壤总有机碳库和土壤微生物量碳库的差异是不同林分之间土壤呼吸差异的主导因素,凋落物C/N对土壤呼吸的Q¹⁰影响最大。为提高模型预测森林类型转换影响土壤碳排放的精度,应综合考虑土壤有机碳库、易变性有机碳库及底物质量的变化。     

Effects of water stress on growth,dry matter allocation and water-use efficiency of a leguminous species, <Emphasis Type="Italic">Sophora davidii</Emphasis>

The adaptation responses to different water conditions and the drought tolerance of Sophora davidii seedlings were assessed in a greenhouse experiment. Two-month-old seedlings were subjected to the following water supplies for 95 days: 100, 80, 60, 40 and 20% of field water capacity. The seedlings at 100% FC had the greatest productivity, height, basal diameter, branch number, leaf number and leaf area. Water supply <80% FC was the threshold of drought-initiated negative effects on seedling growth, yield and physiological processes; these parameters were severely reduced at 20% FC, however, there was no plant death during the experiment. Moreover, water stress decreased leaf relative water content, specific leaf area, leaf area ratio, and water-use efficiency (WUE), whereas it increased the biomass allocation to roots, which resulted in a higher root:stem mass ratio under drought. The S. davidii seedlings tolerated drought by maintaining high leaf relative water content and by reducing branching and leaf expansion. However, low productivity and WUE at 20% FC suggested that seedlings did not produce high biomass under severe drought. Therefore, prior to introducing S. davidii in forestation efforts, a water supply >40% FC is recommended for seedlings to maintain growth and productivity. These results provide insights into limitations and opportunities for establishment of S. davidii in arid regions.     

杉木人工林地力维持及更新技术研究

通过对土壤和杉木幼林调查分析结果表明 ,炼山、全垦初期表层土壤水分物理状况得到一定的改善 ,速效性养分大量增加 ;1年后 ,土壤表层水分物理性能变差 ,速效养分流失 ,土壤肥力逐渐下降。不同营林措施组合处理的杉木幼林生长 ,在树高、胸径、单株材积平均生长量上有差异 ,经方差分析 ,胸径、单株材积生长量有显著性差异 ,而树高生长量差异不显著     

香榧大砧嫁接技术试验

以地径3~5cm的实生榧树大苗为砧木、"细榧"等品种为接穗,研究不同嫁接部位、嫁接时间、嫁接高度、大砧地径大小对香榧新梢生长和嫁接成活率的影响。结果表明,采用主枝劈接和主干劈接的嫁接成活率分别为100%和87.67%,接穗成活率分别为95.17%和83.33%,达到10%以上的显著水平,平均抽梢个数无差异,但主干劈接的新梢平均生长量43.18cm、高于主枝劈接的37.22cm;主干劈接时间上,嫁接成活率间没有显著差异,但新梢生长量随嫁接时间推迟而减小;主干劈接的高度对嫁接成活率、平均抽梢次数没有显著差异,平均新梢长度越低、新梢越长;砧木地径大小对嫁接成活率、平均抽梢次数没有显著差异,但地径越大、新梢越长。     

中国主要人工林树种幼龄材与成熟材及人工林与天然林木材性质比较研究

本文对中国１０种人工林和４种天然林的幼龄材与成熟材及４个树种的人工林木材与天然林木材的构造特征、化学性质、物理性质、力学性质的３３项材性指标差异进行了比较研究。结果表明,在幼龄材与成熟材之间,在统计上表现出差异显著性的为幼龄材比成熟材生长轮宽,管胞列数多,管胞短,直径小,微纤丝角大,密度小,径向干缩小,差异干缩大,流体扩散性高,抗弯强度、抗弯弹性模量、顺纹抗压强度、径面顺纹抗剪强度、径面抗劈力和冲击韧性低等１５项,即４６％的测试项目差异显著;表明在木材加工和用作结构材时应将幼龄材和成熟材视作两个性质不同的总体来考虑,在培育结构材时应研究如何缩短幼年期或改善幼年期材性。在人工林与天然林木材之间,采取人工林幼龄材性质与天然林幼龄材性质相比,人工林成熟材性质与天然林成熟材性质相比,结果表明,多数性质在统计上差异不显著,只有人工林木材比天然林木材胞壁率小、顺纹抗压强度低、差异干缩大、流体扩散性高等４项,即只有１２％的很少数测试项目差异显著;表明有可能通过人工培育的方法培育出与天然林木材性质相近的木材。     

车辆半主动悬架控制器的设计与研究

根据半主动悬架系统的研究现状,设计了嵌入式智能控制器,采用模糊神经网络控制算法,调节车辆半主动悬架系统阻尼系数,在8位单片机上实现了该算法,并且在实验室进行了台架试验,试验结果表明,所设计的控制器可以满足半主动悬架控制系统的要求.