Automatic detection of a damaged cutting tool during machining I: method to detect damaged bandsaw teeth during sawing

This paper presents an on-line method for detecting damaged teeth in the bandsaw using acoustic emission (AE) signal energy. The method is based on an analysis of differences in AE energies generated by normal and damaged teeth during sawing. Because of the difference in the amount of sawing, the AE energy was low for sawing by the damaged tooth and high for sawing by the normal tooth immediately after the damaged tooth. The ratio of AE energy for two successive teeth — a normal tooth immediately following a damaged tooth — was much greater than 1, whereas the ratio of AE energy for two successive normal teeth was close to 1. The results demonstrate that the technique using the AE energy ratio for two successive teeth is effective for on-line detection of damaged bandsaw teeth.Part of this paper was presented at the 9th Annual Meeting of the Chugoku Skikoku Branch of the Japan Wood Research Society, Tottori, October 1997     

Dyeability of Chemically Treated Wood and its Discoloration by UV-ray Irradiation

INTRODUCTION Wood is far from a stable material. One of the biggest challenges for woodworking is learning to work within the constraints of wood properties. Discoloration of wood directly influences the decorative performance of wood products. Therefore, the degree of color change is a critical factor that determines the utilization area of dyed wood (Sakuragawa Satoshi, 1996). Discoloration has occurred because the wood components and dye molecules are degraded by UV-ray (Kaneko Shin…     

Behavior of four broad-leaved tree species used to revegetate eroded granite hill slopes

Information on primary growth behavior after planting is required for mixed-plantation revegetation using broad-leaved species. To estimate primary growth, especially from the perspective of crown coverage and changing growth rates, we examined the growth and survival of four broad-leaved species that are frequently used in erosion-control plantations in Japan. The species studied were Myrica rubra Sieb. et Zucc., Alnus pendula Matsum., Quercus glauca Thunb., and Q. serrata Thunb. The survival, height, and basal diameter of planted trees were measured over a 4-year period, and crown area was calculated over a 3-year period. We found a negative relationship between relative growth rate (RGR) and survival rate, suggesting that fast growth may be fatal when resources are severely limited. The relative height growth rate (RHGR) of A. pendula was especially high during the early period of the study (1997–1999) and then drastically declined, whereas the opposite tendency was observed in Q. glauca. The results of stem allometry analyses conformed to the specific relationships between height growth and diameter growth of the four species; increases in stem thickness based on height increments were smaller in the pioneer species A. pendula. Between-species differences in coverage per planted tree (mean crown area multiplied by survival rate) were small as a result of the negative relationship between coverage area and survival rate.     

Leaf-fall phenology along a topography-mediated environmental gradient in a cool–temperate deciduous broad-leaved forest in Japan

Leaf-fall phenology was studied in a cool–temperate deciduous broad-leaved forest in central Japan in relation to the topographic environmental gradients that occur along a short mountain slope. Leaf-fall phenology was described quantitatively using data from leaf litter collected along the slope. In autumn, leaf fall at the study site tended to occur slightly earlier on the upper slope than on the lower slope. This pattern was found at both the stand and the species levels. Our results suggest that leaf-fall phenology may be affected by difference in microclimatic conditions, because environmental conditions are thought to be more severe on the upper slope than on the lower slope. The less intensive methods used in this study, the litter trap method, and Dixon’s model succeeded in quantifying the phenological patterns of leaf fall within stands and within species along the short mountain slope.     

Assignment of the 1H and 13C NMR spectra of 2-aminobenzamide-labeled galacto- and arabinooligosaccharides

1,4-Linked β-d-galactooligosaccharides with a degree of polymerization (DP) between 1 and 7 and 1,5-linked α-l-arabinooligosaccharides with a DP between 1 and 8 were labeled at their reducing ends with 2-aminobenzamide (2AB) in the presence of sodium cyanoborohydride. The 2AB-labeled oligosaccharides were shown to be homogeneous using high-performance anion-exchange chromatography (HPAEC) and by electrospray ionization mass spectrometry (ESI-MS). The signals in the ¹H and ¹³C nuclear magnetic resonance (NMR) spectra of the 2AB-labeled oligosaccharides were then assigned using one- and two-dimensional NMR spectroscopy. These NMR data will be useful for the structural analysis of enzymatically synthesized galactan and arabinan side chains derived from rhamnogalacturonan I.     

Life cycles of individual roots in fine root system of Chamaecyparis obtusa Sieb. et Zucc.

Recent studies have remarked on differences in the life cycles of individual fine roots. However, the dynamics of individual roots with different life cycles, such as ephemeral and perennial, during root system development are still unknown. We examined individual roots during fine root system development in a mature stand of Chamaecyparis obtusa Sieb. et Zucc. (Cupressaceae) using the sequential ingrowth core method and an anatomical method. The visual classification, i.e., orange, red, brown, intact dead, and fragmented dead, of fine roots corresponded well with the anatomical classification. Orange and red roots contained passage cells, and brown roots contained cork cambium. The proportions of protoxylem groups differed among visual classes. Brown secondary roots were mainly triarch (43%) and tetrarch (40%) and rarely diarch (12%), whereas fragmented dead roots, which constituted more than 95% of the dead roots, were mainly diarch (67%). These results imply that triarch and tetrarch roots tend to form secondary roots, whereas diarch roots tend to become dead roots without secondary growth. Using the numbers of root tips and clusters, root system development could be classified into three stages: colonization, branching within the root system, and maintenance. During the colonization stage, mainly triarch and tetrarch roots, which tend to be secondary growth, invaded ingrowth cores. During the branching stage, primarily diarch roots, which tend to be ephemeral, emerged. Fine root system development involved the recruitment of different individual roots during the life cycle depending on the growth stage.     

Energy and carbon dioxide (CO2) balance of logging residues as alternative energy resources: system analysis based on the method of a life cycle inventory (LCI) analysis

Using the method of a life cycle inventory (LCI) analysis, the energy balance and the carbon dioxide (CO₂) emission of logging residues from Japanese conventional forestry as alternative energy resources were analyzed over the entire life cycle of the residues. The fuel consumption for forestry machines was measured in field experiments for harvesting and transporting logging residues at forestry operating sites in Japan. In addition, a total audit of energy consumption was undertaken. It involved an assessment of materials, construction, and the repair and maintenance of forestry machines as well as the costs associated with an energy-conversion plant. As a result, the ratio of energy output to input was calculated to be 5.69, indicating that the system examined in this study could be feasible as an energy production system. The CO₂ emission per MWh_e (e: electricity) of the biomass-fired power generation plant was calculated to be 61.8kgCO₂/MWh_e, while that of coal-fired power generation plants in Japan is 960kgCO₂/MWh_e. Therefore, the reduction in the amount of CO₂ emission that would result from replacing coal with biomass for power generation by as much as 3.0 million dry-t/year of logging residues in Japan was estimated to be 1.66 million tCO₂/year, corresponding to 0.142% of the national CO₂ emission. This study provides evidence that Japan could reduce its domestic CO₂ emission by using logging residues as alternative energy resources.     

Mercury distribution in tephra soil layers in Hokkaido, Japan, with reference to 34,000-year stratification

Tephra from volcanic eruptions contains only small amounts of mercury (Hg) right after the eruption because the high temperature at eruption evaporates Hg in volcanic ash. Thus, accumulation of Hg in tephra soil layers during the dormant periods of the volcano may reflect Hg deposition while the layer was exposed to the atmosphere. To estimate sequential changes in Hg deposition, we measured the Hg content and accumulation in tephra layers from 6 sites in Hokkaido known to have many tephra layers derived from volcanic eruptions over a 34,000-year period. Mercury content and accumulation rate in the soil profiles varied widely depending on the tephra. In each tephra layer, the Hg content and accumulation rates increased principally at the upper soil horizons and decreased at the lower depths. The Hg deposition rates calculated from the amount of Hg accumulated in the tephra layers were similar within the same tephra. These characteristics of Hg distribution indicate that Hg deposition accumulated on the surface of each tephra layer during the period the tephra layer was exposed to the atmosphere. Although physicochemical processes such as leaching out, wind erosion, and volatilization might lead to over- and/or underestimation of the deposition rates, our estimated amounts of Hg were markedly higher in the tephra soils after 1,600 year BP than before that time. The results of this study suggest that tephra layers in Hokkaido offer important implications for understanding of the historical changes in atmospheric Hg deposition.