All-around 3D plant modeling system using multiple images and its composition

In this study, we developed an all-around 3D plant modeling system that operates using images and is capable of measuring plants non-destructively without any contact. During the fabrication of this device, we selected a method capable of performing 3D model reconstruction from multiple images. We then developed an improved SfM-MVS (Structure from Motion / Multi-View-Stereo) method that enables 3D reconstruction by simply capturing images with a camera. The resulting image-based method offers a high degree of freedom because the hardware and software can comprise commercially available products, and it permits the use of one or more cameras according to the shape and size of the plant. The advantages of the image-based method are that 3D reconstruction can be conducted at any time as long as the images are already taken, and that the desired locations can be observed, measured, and analyzed from 2D images and a 3D point cloud. The device we developed is capable of 3D measurements and modeling of plants from a few millimeters to 2.4 m of height using this method. This article explains this device, the principles of its composition, and the accuracy of the models obtained from it.     

First report of sclerotinia rot of mango caused by <Emphasis Type="Italic">Sclerotinia sclerotiorum</Emphasis> in Japan

A panicle blight with sclerotia was found on mango (Mangifera indica L.) in Okinawa Prefecture, Japan, in March 2016. Water-soaked lesions with white mycelia developed on panicles in the flowering stage; softening and decay of panicles was followed by formation of sclerotia. The fungus isolated from these sclerotia was identified as Sclerotinia sclerotiorum based on morphology and analysis of rDNA-ITS sequences. The isolate reproduced the symptoms on mango panicles in an inoculation test and was reisolated from flower stalks. This is the first report of sclerotinia rot (kinkaku-byo in Japanese) on mango caused by S. sclerotiorum in Japan.     

利用重组自交系群体检测水稻耐铝毒数量性状基因座

利用Kinmaze / DV85 81个重组自交家系(RIL)作图群体,采用苗期单营养液水培鉴定方法,以相对根伸长量（RRE）作为耐铝毒性状的表型值,分析亲本和重组自交系群体对铝毒的耐性表现。利用Windows QTL Cartographer 1.13a软件共检测到5个耐铝毒QTLs,分别位于第1、5、8、9和11染色体上,各个QTL的贡献率在8.64%～18.60%之间,其     

Protected area co-management and land use conflicts adjacent to Phu Kao – Phu Phan Kham National Park,Thailand

This study examined land use conflicts between three villages and Phu Kao – Phu Phan Kham National Park in northeast Thailand that resulted from its access and utilization during 2013–2015. The source of conflict is usufruct rights, a government entitlement program designed to honor villagers who lived on the land before it was established as a national park or forest reserve. Ironically, designation of protected areas is not a safeguard for biodiversity. A complex set of rules and regulations control access to resources, but compliance is subject to government oversight and economic pressure to improve quality of life. Granting usufruct rights may reduce certain land use conflicts, but they fail to address agricultural expansion inside park and forest boundaries. For example, agricultural encroachment in this protected area increased by 13.1% during the study period, mainly through cassava plantings. Cassava requires a small amount of maintenance and has a high market value since it is being promoted as an energy crop by the Thai government. A variety of management strategies are needed for sustainable forestry, such as regular forest patrols, reduction of agricultural-based income, and community-based initiatives.     

Contrasting seasonal leaf habits of canopy trees between tropical dry-deciduous and evergreen forests in Thailand

We compared differences in leaf properties, leaf gas exchange and photochemical properties between drought-deciduous and evergreen trees in tropical dry forests, where soil nutrients differed but rainfall was similar. Three canopy trees (Shorea siamensis Miq., Xylia xylocarpa (Roxb.) W. Theob. and Vitex peduncularis Wall. ex Schauer) in a drought-deciduous forest and a canopy tree (Hopea ferrea Lanessan) in an evergreen forest were selected. Soil nutrient availability is lower in the evergreen forest than in the deciduous forest. Compared with the evergreen tree, the deciduous trees had shorter leaf life spans, lower leaf masses per area, higher leaf mass-based nitrogen (N) contents, higher leaf mass-based photosynthetic rates (mass-based P(n)), higher leaf N-based P(n), higher daily maximum stomatal conductance (g(s)) and wider conduits in wood xylem. Mass-based P(n) decreased from the wet to the dry season for all species. Following onset of the dry season, daily maximum g(s) and sensitivity of g(s) to leaf-to-air vapor pressure deficit remained relatively unchanged in the deciduous trees, whereas both properties decreased in the evergreen tree during the dry season. Photochemical capacity and non-photochemical quenching (NPQ) of photosystem II (PSII) also remained relatively unchanged in the deciduous trees even after the onset of the dry season. In contrast, photochemical capacity decreased and NPQ increased in the evergreen tree during the dry season, indicating that the leaves coped with prolonged drought by down-regulating PSII. Thus, the drought-avoidant deciduous species were characterized by high N allocation for leaf carbon assimilation, high water use and photoinhibition avoidance, whereas the drought-tolerant evergreen was characterized by low N allocation for leaf carbon assimilation, conservative water use and photoinhibition tolerance.     

Potential use of a spatially constrained harvest scheduling model for biodiversity concerns: Exclusion periods to create heterogeneity in forest structure

The objective of this paper is to investigate potential use of a spatially constrained harvest scheduling model for biodiversity concerns. Change in the degree of biodiversity is represented only by spatial characteristics of harvesting patterns of forest stands with different exclusion periods applied to adjacent forest stands. A spatially constrained harvest scheduling model called SSMART (Scheduling System of Management Alternatives foR Timber-harvest) is used for the analysis. It is one of the heuristics to solve a spatially constrained harvest scheduling problem by using the partitioning heuristic. The algorithm incorporated into SSMART is designed to seek a solution for a multicriteria problem with present net value maximum, meeting spatial feasibility and minimizing period-to-period harvest flow fluctuation, approximating even-flow constraints within the 0–1 integer programming framework. Our experimental analysis shows that the longer exclusion period, the less the harvest flow level and the total present net value are derived and the more heterogeneous the forest structure becomes in terms of the forest stand age distribution. It is also shown that the three exclusion period results in a stable forest stand age distribution over the time horizon for our experimental forest. This research supported by the Grants-in-Aid for Scientific Research (No. 09041071) from the Ministry of Education, Science, Sports, and Culture of Japan.     

The smell and odorous components of dried shiitake mushroom, Lentinula edodes V: changes in lenthionine and lentinic acid contents during the drying process

This study on dried shiitake mushroom [Lentinula edodes (Berk.) Pegler] focuses on the behavior of the aromatic lenthionine compound and its precursor, lentinic acid, during the drying process. Only a small amount of lenthionine was present after the drying process, regardless of the drying temperature or time; however, the amount increased during the rehydration process using pH 8.0 buffer. The lenthionine content after incubation in the buffer was correlated with the lentinic acid content in the dried shiitake mushroom. The lentinic acid content increased signifi cantly during the drying process at 40°C up to 4 h. The results show that the characteristic smell of dried shiitake mushroom was weak after drying, and that rehydration in a mild alkaline solution was necessary to increase the smell. The lentinic acid content of dried shiitake could serve as an indicator of the smell produced by rehydration and would be useful in screening to select odor-rich strains. Moderate heating likely caused the increase in lentinic acid content, which might be related to a reaction to heat.     

Effects of sealed pressing and ozonization on properties of styrene-butadiene rubber and polyethylene glycol adhesive bonded board produced by two-stage pressing

Boards were produced by using SP adhesive, which contains styrene-butadiene rubber and polyethylene glycol as major constituents. The use of polyethylene in place of clay, which is also a generally used constituent of SP adhesive, was confirmed to improve board properties. In general, the properties of boards are poorer when produced by two-stage pressing, in which mats are first processed by temporary adhesion and then processed into boards by permanent adhesion; however, the properties of boards produced by two-stage pressing were improved when polyethylene was added to the SP adhesive. In addition, internal bond strength and thickness swelling was greatly improved when boards were produced from ozonized wood and by sealed pressing. Thus, the properties impaired by two-stage pressing were improved by ozonization and sealed pressing.     

Strength properties of laminated veneer lumber in compression perpendicular to its grain

Tests of compression perpendicular to the grain were carried out on laminated veneer lumber (LVL) and timber. The species tested were sugi, radiata pine, karamatsu, akamatsu, and dahurian larch; two sets of sugi specimens were tested, with the sugi LVL products being manufactured in different plants. The strength properties of the materials for different loading directions were compared for LVL and timber. At 5% compressive strain in the same materials, the average stress in the tangential direction of timber was larger than that in the radial direction for all species except for radiata pine, and the average stress in the edge-wise direction of LVL was larger than that in the flat-wise direction for all species except for radiata pine. When the stress at 5% strain was compared in the same direction, the average stress of LVL in the edge-wise direction was larger than that in timber in the tangential direction for all species, but there were no great differences between the average stress of LVL in the fl at-wise direction and that of timber in the radial direction for all species except for radiation pine. There was a close relationship between density and stress at 5% strain in LVL, especially in the edge-wise direction. For all results, radiata pine did not follow the trend of the other species; The large annual ring width of radiata pine was considered to have affected the results.     

Mapping of QTLs controlling epicotyl length in adzuki bean (Vigna angularis)

Epicotyl length (ECL) of adzuki bean (Vigna angularis) affects the efficiency of mechanized weeding and harvest. The present study investigated the genetic factors controlling ECL. An F₂ population derived from a cross between the breeding line ‘Tokei1121’ (T1121, long epicotyls) and the cultivar ‘Erimo167’ (common epicotyls) was phenotyped for ECL and genotyped using simple sequence repeats (SSRs) and single-nucleotide polymorphism (SNP) markers. A molecular linkage map was generated and fifty-two segregating markers, including 27 SSRs and 25 SNPs, were located on seven linkage groups (LGs) at a LOD threshold value of 3.0. Four quantitative trait loci (QTLs) for ECL, with LOD scores of 4.0, 3.4, 4.8 and 6.4, were identified on LGs 2, 4, 7 and 10, respectively; together, these four QTLs accounted for 49.3% of the phenotypic variance. The segregation patterns observed in F₅ residual heterozygous lines at qECL10 revealed that a single recessive gene derived from T1121 contributed to the longer ECL phenotype. Using five insertion and deletion markers, this gene was fine mapped to a ~255 kb region near the end of LG10. These findings will facilitate marker-assisted selection for breeding in the adzuki bean and contribute to an understanding of the mechanisms associated with epicotyl elongation.