Combined effect of wood moisture content,drill bit rotational speed and feed rate on drilling resistance measurements in Norway spruce (Picea abies (L.) Karst.)

ABSTRACT

An IML-RESI PD 400 drilling tool and a standard spade drill bit (IML System GmbH, Wiesloch, Germany) were used to study the combined effect of wood moisture content (MC), drill bit rotational speed and feed rate on drilling resistance (DR) and feeding force (FF). Tests were made with Norway spruce (Picea abies (L.) Karst.) conditioned in a normal climate (20°C/65% RH), at 20°C/95% RH, vacuum-pressure impregnated in water, and oven-dried. Rotational speeds and feed rates had an impact on feed rate per cutting edge for the major cutting edge of the drill bit which was used for correlation with DR and FF for various MC. Impact of MC on DR and FF depended on rotational speeds and feed rates of the drill bit. For feed rates per cutting edge less than 0.09?mm, DR was higher for water saturated (WS) specimens. Negligible differences between DR for various MC were found for feed rates per cutting edge between 0.09 and 0.15?mm. DR was higher at low MC for feed rates per cutting edge which were higher than 0.15?mm. FF extremely increased in conditioned (20°C/95% RH) and WS specimens at feed rates per cutting edge less than 0.1?mm.     

Estimating balanced structure areas in multi-species forests on the Sierra Madre Occidental,Mexico

• Introduction   

This study presents a method for estimating the minimum area which exhibits a balanced diameter distribution, and the corresponding number of trees, for different tree species and forest types in the Santiago Papasquiaro region in the State of Durango, Mexico. The balanced structure area is defined as the minimum contiguous area that is required for sustainable management of a multi-sized selection forest. A multi-sized forest represents a balanced structure unit if the relationship between harvest and growth can be maintained, using a defined target diameter distribution and disregarding major natural disturbances. The study is based on 17,577 sample plots in uneven-aged forests, which are selectively harvested by local communities.     

Shoot growth and crown development: effect of crown position in three-dimensional simulations

Trees have been increasingly considered as modular organisms, with individual shoots forming autonomous units that respond semi-independently to their surrounding environment. However, there is evidence for fairly strict hormonal control of tree crown development. Studies on the hydraulic architecture of trees suggest a closer functional connection between shoots and crown development than is postulated by the theory of branch autonomy. We studied how shoot growth pattern influences growth and crown architecture in young Scots pine trees simulated by the LIGNUM model assuming that (a) the growth of a shoot mainly depends on its light climate and (b) the growth of a shoot is influenced by its position within the crown. We determined shoot position within the crown based on a recently developed vigor index. The vigor index compares the relative axis cross-sectional area from the base of the tree to each shoot and gives a value of 1 to the pathway of the greatest cross-sectional area. All other shoots attain values between 0 and 1 depending on their cross-sectional areas and the cross-sectional areas of the branches leading there from the main axis. The shoot light climate is characterized by annually intercepted photosynthetically active radiation. We compared the results from simulations (a) and (b) against an independent data set. The addition of a within-shoot position index (the vigor index) to our simulation (simulation b) resulted in a more realistic tree form than that obtained with simulation (a) alone. We discuss the functional significance of the results as well as the possibilities of using an index of shoot position in simulations of crown architecture.     

Spatial variability of nutrient stocks in the humus and soils of a forest massif (Fougères, France)

In this study, the spatial distribution of nutrient stocks (K, Ca, Mg and P) was examined in humus and soils at the forest massif scale (Fougères forest, France). A random stratified sampling plan including 100 sampling points was used and three potential variation factors of nutrient stocks were tested: age of stand, type of stand (broad-leaved or coniferous trees) and type of soil. Sampling classes were then compared and the variation factors were examined. Results demonstrated that nutrient stocks in the humus were not influenced by the cited factors and only the type of soil influenced nutrient stocks in soils. In fact, stocks of exchangeable elements in soils were much higher in Colluviosols-Fluviosols which show redoximorphic characteristics, and available phosphorus stocks were lower than in Alocrisols-Neoluvisols. Moreover, a low variability of nutrient stocks was observed in Alocrisols-Neoluvisols as opposed to Colluviosols-Fluviosols, which may suggest the existence of other variation factors not taken into account in this study (hydromorphic gradient, type and age of stand in hydromorphic zones).     

A new bioclimatic model calibrated with vegetation for Mediterranean forest areas

? Water availability is one of the main factors explaining flora composition and growth in Mediterranean regions, where it may decline with climate change.

? Our goal was to develop a model for forest site assessment in Mediterranean environments, focusing on water availability to assess potential vegetation composition and productivity in any places, whatever their level of disturbance.

? We designed a statistical model, using global climatic and geographic variables, as well as detailed local topographic and edaphic variables, to compute a bioclimatic index for Mediterranean forest environments. This model was calibrated in France with a flora index from 325 old forests. The model explained 80.3% of the flora index variance. The method fills a gap in existing models, bridging scales from the region to forest sites.

? Beyond its theoretical aspect, it was designed to allow practical tools to be derived from it for decision-making and management, such as the assessment of climate change impact on vegetation, and of forest productivity. Its development and adaptation is possible in other Mediterranean regions, and in any region where water is one of the main limiting factors.

     

Constraints on light interception efficiency due to shoot architecture in broad-leaved Nothofagus species

Shoot architecture may significantly alter mean quantum flux on foliage and thus, photosynthetic productivity. There is currently only limited information about plastic alterations in shoot structure caused by within-canopy variation in mean integrated irradiance (Q(int)) in broad-leaved trees. We studied leaf and shoot structure, and nitrogen and carbon content in late-successional, widely distributed, temperate, broad-leaved Nothofagus taxa to determine the architectural controls on light harvesting and photosynthetic performance. Nothofagus fusca (Hook. f.) Oersted has larger leaves and less densely leaved shoots than the N. solandri varieties. Nothofagus solandri var. solandri (Hook. f.) Oersted is characterized by rounder leaves that potentially have a larger overlap than the ovate-triangular leaves of N. solandri var. cliffortioides (Hook. f.) Poole. Leaf dry mass (M(A)) and nitrogen content (N(A)) per unit area increased with increasing Q(int) in all species, demonstrating enhanced investment of photosynthetic biomass in high light. Although M(A) differed between species at a common irradiance, there was a uniform relationship between N(A) and Q(int) across species. Leaf carbon content per dry mass and leaf dry mass to fresh mass ratio also scaled positively with irradiance, suggesting greater structural investments in high light. In all species, shoots became more horizontal and flatter at lower Q(int), implying an enhanced use efficiency of direct irradiance in natural leaf positions. In contrast, irradiance effects on leaf aggregation varied among species. Across the data, leaf overlap or leaf area density was often greater at lower irradiances, possibly as a result of limited carbon availability for shoot axis extension growth. In N. fusca, leaves of which were more aggregated in high light, the shoot silhouette to total leaf area ratio (S(S)) declined strongly with increasing irradiance, demonstrating a lower light harvesting efficiency at high Q(int). This effect was only moderate in N. solandri var. cliffortioides and S(S) was independent of Q(int) in N. solandri var. solandri. Although the efficiency of light interception at high irradiances was lowest in N. fusca, this species had the greatest nitrogen content per unit shoot silhouette area (2N(A)/S(S)), indicating superior shoot-level photosynthetic potential. These data collectively demonstrate that shoot architecture significantly affects light interception and photosynthesis in broad-leaved trees, and that structural carbon limitations may constrain leaf light harvesting efficiency at low irradiance.     

Laser ablation-combustion-GC-IRMS--a new method for online analysis of intra-annual variation of delta13C in tree rings

We present a new, rapid method for high-resolution online determination of delta13C in tree rings, combining laser ablation (LA), combustion (C), gas chromatography (GC) and isotope ratio mass spectrometry (IRMS) (LA-C-GC-IRMS). Sample material was extracted every 6 min with a UV-laser from a tree core, leaving 40-microm-wide holes. Ablated wood dust was combusted to CO2 at 700 degrees C, separated from other gases on a GC column and injected into an isotope ratio mass spectrometer after removal of water vapor. The measurements were calibrated against an internal and an external standard. The tree core remained intact and could be used for subsequent dendrochronological and dendrochemical analyses. Cores from two Scots pine trees (Pinus sylvestris spp. sibirica Lebed.) from central Siberia were sampled. Inter- and intra-annual patterns of delta13C in whole-wood and lignin-extracted cores were indistinguishable apart from a constant offset, suggesting that lignin extraction is unnecessary for our method. Comparison with the conventional method (microtome slicing, elemental analysis and IRMS) indicated high accuracy of the LA-C-GC-IRMS measurements. Patterns of delta13C along three parallel ablation lines on the same core showed high congruence. A conservative estimate of the precision was +/- 0.24 per thousand. Isotopic patterns of the two Scots pine trees were broadly similar, indicating a signal related to the forest stand's climate history. The maximum variation in delta13C over 22 years was about 5 per thousand, ranging from -27 to -22.3 per thousand. The most obvious pattern was a sharp decline in delta13C during latewood formation and a rapid increase with spring early growth. We conclude that the LA-C-GC-IRMS method will be useful in elucidating short-term climate effects on the delta13C signal in tree rings.     

Kernel regression methods for the prediction of wood properties of Pinus taeda using near infrared spectroscopy

Near infrared diffuse reflectance spectra collected in 10-mm sections were used for the estimation of air-dry density (AD), microfibril angle (MFA), stiffness (MOE), tracheid coarseness (COARS), and tracheid wall thickness (WTHICK) in wood radial strip samples obtained at breast height (1.4 m) from 60 Pinus taeda trees. Calibration models were developed using traditional partial least squares (PLS) and kernel regression. The kernel methods included radial basis functions-partial least squares (RBF-PLS) and least-squares support vector machines (LS-SVM). RBF-PLS and LS-SVM models outperformed PLS-CV calibrations in terms of fit statistics. MFA and MOE, two properties that exhibited nonlinearity, showed the most significant improvements compared to PLS. In terms of predictive ability RBF-PLS performed better than PLS for the prediction of MFA, MOE, and COARS. LS-SVM showed better prediction statistics in all cases, except for WTHICK that gave similar statistics compared to PLS and was superior to RBF-PLS. By adding statistically significant factors to the PLS regressions, it was possible to capture some of the nonlinear features of the data and improve the predictive ability of the PLS models.     

Assessment of sugar maple tree growth in relation to the partitioning of elements in xylem along a soil acidity gradient

Partitioning of elements in tree xylem is being increasingly studied, as it suggests that elements are potentially mobile within the xylem long after their uptake. A recent study revealed that only the most mobile xylem fraction (water-soluble) of base cations (calcium [Ca], magnesium [Mg], and potassium [K]) increased at higher soil acidity, while the two mobile fractions (water- and acid-soluble) of acidic metals—potentially phytotoxic aluminium (Al), cadmium (Cd) and manganese (Mn)—were significantly enhanced on very acid soils. The current paper presents an investigation of soil-wood chemistry relationships with basal area tree growth. It was hypothesized that the growth of sugar maple would be reduced by low base cation and high acidic metal concentrations in the xylem mobile fractions. Sugar maple trees (n = 55) from six watersheds in southern Quebec, Canada were analysed by sequential chemical extractions for the water-soluble, acid-soluble and residual fractions of base cations (Ca, K, Mg) and acidic metals (Al, Cd, Mn) in xylem. Generally, tree growth was positively correlated to concentrations of base cations in wood (ρ = 0.27-0.50) and soil (ρ = 0.41-0.67), and negatively correlated to concentrations of acidic metals in wood (ρ = −0.33 to −0.52) and soil (ρ = −0.67). However, these relations differed depending on the element fraction considered. Water- and acid-soluble xylem concentrations of base cations and Al were among the best predictors of growth trends (R² = 0.46-0.51). The relationship between acidic metals and tree growth is further discussed.