In search of a maize ideotype for cell wall enzymatic degradability using histological and biochemical lignin characterization

Grass cell wall degradability is conventionally related to the lignin content and to the ferulic-mediated cross-linking of lignins to polysaccharides. To better understand the variations in degradability, 22 maize inbred lines were subjected to image analyses of Fasga- and M?ule-stained stem sections and to chemical analyses of lignins and p-hydroxycinnamic acids. For the first time, the nearness of biochemical and histological estimates of lignin levels was established. Combination of histological and biochemical traits could explain 89% of the variations for cell wall degradability and define a maize ideotype for cell wall degradability. In addition to a reduced lignin level, such an ideotype would contain lignins richer in syringyl than in guaiacyl units and preferentially localized in the cortical region rather than in the pith. Such enrichment in syringyl units would favor wall degradability in grasses, contrary to dicots, and could be related to the fact that grass syringyl units are noticeably p-coumaroylated. This might affect the interaction capabilities of lignins and polysaccharides.     

Characterization and quantitation of phenolic compounds in new apricot (Prunus armeniaca L.) varieties

Thirty-seven apricot varieties, including four new releases (Rojo Pasión, Murciana, Selene, and Dorada) obtained from different crosses between apricot varieties and three traditional Spanish cultivars (Currot, Mauricio, and Búlida), were separated according to flesh color into four groups: white, yellow, light orange, and orange (mean hue angles in flesh were 88.1, 85.0, 77.6, and 72.4, respectively). Four phenolic compound groups, procyanidins, hydroxycinnamic acid derivatives, flavonols, and anthocyanins, were identified by HPLC-MS/MS and individually quantified using HPLC-DAD. Chlorogenic and neochlorogenic acids, procyanidins B1, B2, and B4, and some procyanidin trimers, quercetin 3-rutinoside, kaempferol 3-rhamnosyl-hexoside and quercetin 3-acetyl-hexoside, cyanidin 3-rutinoside, and 3-glucoside, were detected and quantified in the skin and flesh of the different cultivars. The total phenolics content, quantified as the addition of the individual compounds quantified by HPLC, ranged between 32.6 and 160.0 mg 100 g(-1) of edible tissue. No correlation between the flesh color and the phenolic content of the different cultivars was observed.     

The Effect of Humic Substances and Phosphate Fertilizer on Growth and Nutrient Uptake of the Potato

ABSTRACT

The use of applied phosphorus (P) and the uptake of nutrients from the soil by plants can be improved when the fertilizer is combined with the application of humic substances (HS). However, these beneficial effects are inconsistent and can depend on the type of soil. This study was performed to evaluate the effects of the application of HS (0, 1.25, and 7.50 mL pot^–1), as Humic HF®, and fertilizer-P (10, 50, 100, and 200 mg P dm^–3), as triple superphosphate, on root morphological characteristics, dry matter accumulation, nutrient uptake, and tuber yield of potatoes grown in sandy and clayey soils. Only under low P supply in the sandy soil did the supply of HS, at the rate of 1.25 mL pot^–1, increase the plant growth, yield of tubers, and uptake of macronutrients by the plants, without affecting the efficiency of the P fertilization. In the clayey soil, which had a higher organic matter content, the application of HS did not affect plant growth, tuber yield or nutrient uptake. In both soils, P fertilization increased plant growth, tuber yield, and nutrient uptake. The combined application of HS and P increased the root length of potatoes in sandy soil.     

Clarification of Muscat musts using wheat proteins and the flotation technique

The bovine spongiform encephalopathy (BSE, mad cow) crisis has led some wine-makers to question gelatin as a fining agent and to reject the use of these animal proteins. The search for a substitute for gelatin was begun by comparing vegetable proteins (particularly gluten) with gelatin fining treatments. Clairette de Die (French-controlled appellation) is a sparkling sweet wine. The alcoholic fermentation begins in a tank, continues in a crown-cap bottle, and stops before the complete consumption of sugar. All particles present in the bottle have to be removed before corking, and it is important to have a must as clear as possible. This study concerned the clarifying of a Muscat must, treated with pectinases, using a very efficient flotation technique. The must is fined with bentonite/silica/protein (fish gelatin, wheat gluten, or lupin isolate) to induce flocculation and then pressurized (6 bar). After depressurization, microbubbles cling to flocculates and climb to the top of the flotation tank (this flotation foam is clarified using a rotary filter). At laboratory scale, gluten (20 g/hL) and gelatin (10 g/hL) (each combined with bentonite and silica gel) gave turbidities of 50 and 35 NTU, respectively (6.5 and 4.1% of that of the nontreated must). The Muscat must was also clarified by static settling. The turbidity decreased by 86% for the gluten/bentonite fining and by 60% for the gelatin/bentonite fining. Visually, gluten flocculation takes longer to occur and flocculates sedimentation is longer than with gelati, but the removal of insoluble particles is more complete and leads to lower turbidities. At an industrial scale, gluten (20 g/hL) and gelatin (10 g/hL) (each combined with bentonite and silica gel) gave turbidities of 60 and 48 NTU, respectively. Turbidities measured in the tanks 14 h after the flotation showed a better efficiency for the wheat gluten (24 NTU) compared to gelatin (28 NTU). This is explained by the static settling that completed the clarifying effect of the flotation. The last experiment showed comparable efficiencies for wheat gluten and lupin proteins. BSE caused a situation of crisis (in Europe particularly) leading the public and wine-makers to lose their confidence in the use of gelatin as fining agent and to reject animal proteins in general. It is proposed here that vegetable proteins could efficiently replace gelatin.     

Seasonal and phenological variations of the essential oil from the narrow endemic species Artemisia molinieri and its biological activities

The volatile components of the aerial parts of Artemisia molinieri, an endemic wormwood of southern France, were analyzed by GC and GC-MS. Among the 69 compounds identified, major components were ascaridole (19-76%), alpha-terpinene (traces-36%), p-cymene (1-17%), 1,8-cineole (0.3-8%), and germacrene D (0.6-15%). Quantitative variations have been characterized following the season, the phenological cycle, and the aging of the plants. Bioassays have been performed on a sample of essential oil, which has shown a strong inhibition of the growth of both tested yeasts (Candida albicans and Saccharomyces cerevisiae var. chevalieri) and minor activity on both tested Gram-negative bacteria (Escherichia coli and Enterococcus hirae). The oils have shown interesting antioxidant activities on the basis of alpha-tocopherol as reference compound, up to 400-1200%.     

Reactions of anthocyanins and tannins in model solutions

The reaction between procyanidin dimer Ec-EcG (B2 3'-O-gallate) and malvidin 3-O-glucoside (Mv3glc) was studied in a model solution system at two different pH values, 2.0 and 3.8. Disappearance of both species was much faster at pH 3.8 than at pH 2.0. That of Mv3glc was increased in the presence of Ec-EcG, whereas that of Ec-EcG was the same in the presence or absence of the anthocyanin. Values of absorbance at 520 nm measured at pH 2.0 were correlated with the amount of residual Mv3glc. Those measured at pH 3.8 hardly changed during the incubation, but absorbance values at 420 and 620 nm as well as resistance to sulfite bleaching were much increased, confirming that Mv3glc was converted to other pigments. Anthocyanin-flavanol adducts were observed at both pH values, but their structures were different. At pH 2.0, cleavage of the procyanidin linkage followed by nucleophilic addition of flavanol or anthocyanin moieties led to (Ec)(n)-EcG and (Ec)(n)-Mv3glc, respectively. At pH 3.8, nucleophilic addition of Ec-EcG onto the anthocyanin yielded Mv3glc-(Ec-EcG).     

Genetic variability evaluation in a Moroccan collection of barley, Hordeum vulgare L., by means of storage proteins and RAPDs

The genetic variation existing in a set of barley (Hordeum vulgare L.) landrace samples recently collected in Morocco was estimated. Two kinds of genetic markers, seed storage proteins (hordeins) and random amplified polymorphic DNA (RAPD), were used. Only six out of 31 landraces were subjected to RAPD analysis. Both kinds of markers, RAPD and storage proteins, yielded similar results, showing that the level of variation observed in Moroccan barley was high: all landraces showed variability; 808 different storage protein patterns (multilocus associations) were observed among 1897 individuals (2.32 seeds per association, on average) with an average of 43 multilocus associations per accession. In general, genetic variation within accessions was higher than between accessions. The 100 polymorphic RAPD bands generated by 21 effective primers were able to generate enough patterns to differentiate between uniform cultivars and even between individuals in variable accessions. One of the aims of this work was to compare the effectiveness of RAPD versus storage protein techniques in assessing the variability of genetic resource collections. On average hordeins were more polymorphic than RAPDs: they showed more alternatives per band on gels and a higher percentage of polymorphic bands, although RAPDs supply a higher number of bands. Although RAPD is an easy and standard technique, storage protein analysis is technically easier, cheaper and needs less sophisticated equipment. Thus, when resources are a limiting factor and considering the cost of consumables and work time, seed storage proteins must be the technique of choice for a first estimation of genetic variation in plant genetic resource collections.     

On-site remediation of chromium-contaminated sediments by combination of sediment washing and stabilization with magnesium oxide/limestone mixtures

Goal, Scope and Background  The remediation of heavy-metalcontaminated soils and sediments is of significant value to industrial areas around the world. The spread of such pollutants can result in a potential risk of entering the groundwater system and being transported to potential receptors. Leaching techniques can be an effective treatment option for the metal removal from soils and sediments. This approach consists of washing or leaching the contaminated soil with an appropriate reagent and the subsequent treatment of the leaching in an above-ground installation (on-site treatment) where metals can be removed and concentrated into a smaller volume. Among the heavy metals, chromium is a commonly identified soil contaminant, particularly in sites with intensive economic activities including agriculture, industrial, mining and mineral,processing. Objective  The objective of this work was the evaluation and development of a leaching process for the remediation of soils and sediments polluted with chromium at laboratory scale. Chromium soil pollution was generated after the breakdown of a channel containing chromium wastes from a tannery plant. The pollution extension has been estimated to be on the order of thousands of tonnes of soil to be treated, with chromium contents ranging from 500 to 17,000 mg kg^-1 soil. Methods  The whole process investigated in this study integrates three stages; a) chromium leaching from a sediment using a diluted sulphuric acid solution, b) treatment of the leaching effluents with a magnesium oxide/limestone mixture for the precipitation of chromium hydroxide after acidity neutralisation, and c) polishing step to remove the eventual remaining chromium by adsorption onto natural zeolite. The amount of contaminated sediment treated ranged from 0.5 to 2 kg with chromium contents of between 2000 and 17,000 mg kg^-1. Results and Discussion  The paper describes results on the performance of the process and the optimisation of steps including influence of acid sulphuric concentration, chromium removal efficiency as well as alkaline reactive mixture proportions. Effluents from the leaching cells showed a significant decay on the chromium concentration with the increase of leaching runs and a high content of acidity (pH values close to 0.5). The treatment of these effluents in a second cell containing magnesium oxide/ limestone mixtures resulted in a high efficiency in neutralisation of acidity (pH values around 7) and chromium removal (concentrations below 5 mg 1^-1). The passage through a third compartment containing zeolite as an adsorbent decreased the chromium concentration below 0.5 mg 1^-1, Conclusions  From the results obtained on the chromium leaching and immobilisation with magnesium oxide/limestone mixture at a laboratory scale, it could be pointed out that: (a) diluted sulphuric acid solutions (3%) demonstrated a high efficiency on chromium removal from sandy polluted soils on the kilogram scale, (b) mixtures of magnesium oxide/limestone demonstrated a high capacity to neutralise the residual high acidity present on the effluents and to remove chromium by precipitation and (c) between the limestone and caustic magnesia mixtures, those containing more than 60% of caustic magnesia provide the higher efficiency. Recommendation and Outlook  Future work would be directed to the evaluation of the integrated process of leaching and chromium precipitation on column at a scale of 100 to 1000 kg.     

Olive fruit cell wall: degradation of pectic polysaccharides during ripening

Olive fruits at three stages of ripening (green, cherry, and black) have been studied. After cell wall isolation, the compositions of the cell wall and that of the phosphate-soluble polysaccharides were determined. In cell walls, decreases in arabinose, xylose, glucose, and uronic acid levels were observed, together with a slight increase in mannose on ripening. At the beginning of ripening, fragments of pectic polymers were the major constituents of the phosphate-soluble fraction, with the hemicellulosic ones increasing toward the end of the process. The molecular weight of the fragments solubilized was approximately 6 kDa. After cell wall fractionation, the pectic polysaccharides soluble in imidazole and sodium carbonate were also studied. In both fractions, between the green and cherry stages of ripening, a significant loss of homogalacturonans took place. Between the cherry and black stages of ripening, rhamnogalacturonan side chains were also released in addition to homogalacturonans. In any of the pectic fractions, changes in apparent molecular weight were quantified.