Self-thinning in four pine species: an evaluation of potential climate impacts

Key message

Self-thinning lines are species- and climate-specific, and they should be used when assessing the capacity of different forest stands to increase biomass/carbon storage.

Context

The capacity of forests to store carbon can help to mitigate the effects of atmospheric CO₂ rise and climate change. The self-thinning relationship (average size measure ～ stand density) has been used to identify the potential capacity of biomass storage at a given density and to evaluate the effect of stand management on stored carbon. Here, a study that shows how the self-thinning line varies with species and climate is presented.

Aims

Our main objective is thus testing whether species identity and climate affect the self-thinning line and therefore the potential amount of carbon stored in living biomass.

Methods

The Ecological and Forest Inventory of Catalonia was used to calculate the self-thinning lines of four common coniferous species in Catalonia, NE Iberian Peninsula (Pinus halepensis, Pinus nigra, Pinus sylvestris and Pinus uncinata). Quadratic mean diameter at breast height was chosen as the average size measure. The self-thinning lines were used to predict the potential diameter at a given density and study the effect of environmental variability.

Results

Species-specific self-thinning lines were obtained. The self-thinning exponent was consistent with the predicted values of ?3/2 and ?4/3 for mass-based scaling for all species except P. sylvestris. Species identity and climatic variability within species affected self-thinning line parameters.

Conclusion

Self-thinning lines are species-specific and are affected by climatic conditions. These relationships can be used to refine predictions of the capacity of different forest stands to increase biomass/carbon storage.

     

Comparison between meloxicam and transdermally administered fentanyl for treatment of postoperative pain in dogs undergoing osteotomy of the tibia and fibula and placement of a uniplanar external distraction device

OBJECTIVE: To compare the efficacy of meloxicam administered perioperatively with transdermal administration of fentanyl via a patch placed preoperatively in dogs undergoing orthopedic surgery. DESIGN: Prospective study. ANIMALS: 16 dogs. PROCEDURE: Unilateral or bilateral osteotomy of the tibia and fibula was surgically performed, and a uniplanar external distraction device was placed in each limb. Postoperative pain and lameness were assessed 24, 48, and 72 hours after administration of the first of 3 doses of meloxicam (0.2 mg/kg [0.09 mg/lb], IV, given preoperatively, followed by 0.1 mg/kg [0.045 mg/lb], IV, after 24 hours, and 0.1 mg/kg, PO, after 48 hours) or preoperative placement of a transdermal fentanyl patch (50 microg/h) left in place for 72 hours. RESULTS: No significant differences in total pain scores were detected between groups. Mean +/- SD lameness scores assessed at 24 and 72 hours were lower in dogs in the meloxicam group than dogs in the fentanyl group. Lameness scores decreased with time in a similar manner in both treatment groups. CONCLUSIONS AND CLINICAL RELEVANCE: Perioperative administration of meloxicam or preoperative placement of a transdermal fentanyl patch provided effective and similar postoperative analgesia in dogs undergoing orthopedic surgery. However, because of its anti-inflammatory effects, treatment with meloxicam reduced the degree of lameness and resulted in rapid functional recovery of the limb.     

Analysis of Aggressiveness of Erwinia amylovora Using Disease-Dose and Time Relationships

ABSTRACT The aggressiveness of an extensive collection of strains of Erwinia amylovora was analyzed using immature fruit and detached pear flower assays under controlled environmental conditions. The analysis was performed by means of a quantitative approach based on fitting data to mathematical models that relate infection incidence to pathogen dose and time. Probit and hyperbolic saturation models were used for disease-dose relationships and provided information on the median effective dose (ED(50)). Values of ED(50) ranged from 10(3) to 10(6) CFU/ml (10 to 10(4) CFU per site of inoculation). A modified Gompertz model was used for disease-time relationships and provided information on the rate of infection incidence progression (r(g)) and time delayed to start of the incidence progress curve (t(0)). Values of r(g) ranged from near 0 to 1.90, and t(0) varied from 1.3 to more than 10 days. The more aggressive strains showed high r(g), low ED(50) values, and short t(0), whereas the less aggressive strains showed low r(g), high ED(50), and long t (0). The aggressiveness was dependent on plant material type and pear cultivars and was significantly different between strains of E. amylovora. Infectivity titration and kinetic analysis of progression of incidence of infections using the immature pear test and a standardized scale are proposed for assessment of strain aggressiveness. The implications of r(g), ED(50), and t(0) for the epidemiology and management of fire blight are discussed, particularly the wide range of aggressiveness among strains, the degree of host specificity observed in pear isolates, the very high infective potential of this pathogen, the independent action of pathogen cells during infection, and the possible advantage of including aggressiveness parameters into fire blight risk forecasting systems.     

Evidence for age- and size-mediated controls of tree growth from grafting studies

Vegetative propagation techniques such as grafting can be used, in conjunction with field studies, to decouple the relative effects of age and size on tree metabolism and growth. Despite interest in this approach, little attention has been paid to the best metrics for assessing the growth performance of grafted plants over time. Based on an analysis of the grafting literature and our own data, we show that the choice of metrics to assess tree growth can entirely change the conclusions reached about the relative importance of age versus size. We recommend that absolute as well as relative rates of growth are calculated and that scion size be standardized as much as possible at the start of the experiment. Once proper metrics are chosen, all of the available published evidence is largely concordant with two concepts: (1) age-mediated controls of tree growth are likely to be important during the first few years of a tree's life (before phase change); and (2) after the first few years of a tree's life, size-mediated factors largely prevail over age-mediated factors in determining tree growth rates. We found no support for theories invoking age-mediated sink limitations in old trees.     

Sustainability of regulated deficit irrigation in a mid-maturing peach cultivar

The level of irrigation restriction to apply in a deficit irrigation (DI) programme for sustainable peach (‘Baby gold 6’) production was investigated. The experiment involved four irrigation treatments over five consecutive seasons (2007–2011). They were full irrigation (control), reducing irrigation by 20 % during the first half of stage III (DI-80 %), withholding irrigation until reaching a light stress level (DI-L) and withholding irrigation until reaching a moderate stress level (DI-M). The withholding of irrigation in both DI-L and DI-M was applied only during stage II and postharvest periods and was based on midday stem water potential thresholds (Ψ _stem). For the DI-L treatment ?1.5 MPa was used in both periods, and for DI-M ?1.8 and ?2.0 MPa were used during stage II and postharvest, respectively. Average Ψ _stem values during DI periods were approximately ?1.4 and ?1.2 MPa for DI-M and DI-L, respectively. The pre-defined thresholds required to trigger irrigation were rarely reached. No significant differences between treatments were found in terms of yield in any experimental year. However, DI-M and to a lesser extent DI-L had lower final fruit fresh mass at harvest related to lower Ψ _stem after three consecutive years of the experiment (during 2010 and 2011). Therefore, in terms of fruit size, DI was not sustainable. Rather than lowering Ψ _stem thresholds, we recommend discontinuing DI after 3-year application.     

Genetic variation and genotype-environment interactions in short rotation <Emphasis Type="Italic">Populus</Emphasis> plantations in southern Europe

Growth and production in the first year, as additional selection criteria, were assessed for nine poplar clones to be used as short rotation woody crops (SRWC) in the production of biomass for energy purposes. In order to identify the most promising clones in terms of growth and yield and also to assess their stability, trials were established at different locations in Spain. The majority of these clones, which form part of the European list of base materials, have frequently been used in plantations aimed at timber production but not for biomass in Mediterranean conditions. Others, such as those selected in Italy specifically for biomass production (currently provisionally admitted), are being tested for the first time under different soil and climatic conditions in Southwest Europe. The early selection of clones for rapid juvenile growth provides a valuable additional input to the clonal selection process, especially where very short rotations are desired (no more than 3 years). In any case, determining clonal stability in terms of growth is of great use not only when deciding on the clones to be used in plantations but also when developing breeding programs. ANOVA and Genotype plus Genotype × Environment (GGE) biplot analyses were used to analyse the growth and stability of the clones, which were then ranked according to mean performance and stability. Differences were detected between clones as well as between the different environments tested. The biplot analysis allowed different groups of clones to be identified according to their performance and degree of interaction displayed, thus providing useful information for the selection process. The production of aboveground biomass in the first vegetative period ranged from 1.7 to 8.0 Mg DM ha⁻¹ at the different sites. ‘Monviso’, ‘Guardi’, ‘AF2’ and ‘2000 verde’ were the most productive clones whereas ‘Unal’, ‘Pegaso’ and ‘USA 49-177’ were the least productive. The stability analysis identified ‘AF2’, ‘Guardi’, ‘I-214’ and ‘MC’ as more stable clones while ‘Monviso’, ‘2000 verde’, ‘Unal’, ‘Pegaso’ and ‘USA 49-177’ were found to be specifically adapted to certain environments. This implies that where information on site conditions is not available, the ‘AF2’ and ‘Guardi’ clones offer greater assurance of successful establishment and higher initial growth. The growth of ‘Monviso’ ‘2000 verde’ ‘Unal’ ‘Pegaso’ and ‘USA 49-177’ clones is highly dependent on site conditions during the establishment phase. Similarly, the SH (Shore Henares river) and LT (La Tallada) sites were identified as the most highly discriminative environments for the set of clones while CS (Cubo de la Solana) and AR (Atarfe) were identified as those where performance levels were average.     

Morphological and biometrical features of Trypanosoma evansi isolates from an outbreak in mainland Spain

According to several authors, Trypanosoma evansi is a monomorphic trypanosome found exclusively in slender intermediate forms, although additional studies have revealed that many strains present stumpy forms on rare occasions. In a recent T. evansi outbreak in mainland Spain, several atypical forms were observed in blood smear examinations. Molecular procedures were then necessary to confirm the causal agent. Morphological and biometric measures were taken to characterize the different forms of T. evansi. In contrast to published information, the results of this study would indicate that biometrically distinct T. evansi could also be found in the same farm and even in the same animal species. These data could be useful for many trypanosomes endemic areas of the world where molecular methods are not commonly available.     

Fruit thinning in ‘Conference’ pear grown under deficit irrigation: Implications for fruit quality at harvest and after cold storage

Fruit thinning in pear is feasible for mitigation of water stress effects. However, it is not well known how fruit quality at harvest and after cold storage is affected by pre-harvest water stress. Even less is known about the effects of fruit thinning on quality under these circumstances. To elucidate these, we applied deficit irrigation (DI) and fruit thinning treatments to ‘Conference’ pear over the growing seasons of 2008 and 2009. At the onset of Stage II (80 and 67 days before harvest in 2008 and 2009, respectively), two irrigation treatments were applied: full irrigation (FI) and DI. FI trees received 100% of crop evapotranspiration (ETc). DI trees received no irrigation during the first three weeks of Stage II to induce water stress, but then received 20% of ETc to ensure tree survival. From bud-break until the onset of Stage II and during post-harvest, FI and DI trees received 100% of ETc. Each irrigation treatment received two thinning levels: no thinning leaving commercial crop load (∼180 fruits tree⁻¹), and hand-thinning at the onset of Stage II leaving a light crop load (∼85 fruits tree⁻¹). Under commercial crop loads, DI trees were moderately water-stressed and this had some positive effects on fruit quality. DI increased fruit firmness (FF), soluble solids concentrations (SSC) and acidity at harvest while no changes were observed in fruit maturity (based on ethylene production). Differences in FF and acidity at harvest between FI and DI fruit were maintained during cold storage. DI also reduced fruit weight loss during storage. But fruit size was reduced under DI. Fruit thinning under DI resulted in better fruit composition with no detrimental effect on fresh-market yield compared to un-thinned fruit. Fruit size at harvest and SSC values after five months of cold storage were higher in fruit from thinned trees than fruit from un-thinned trees. Fruit thinning increased fruit ethylene production, indicating advanced maturity. This may lead to earlier harvest which is desirable in years with impending drought. Fruit thinning is therefore a useful technique to enhance pear marketability under water shortage.