Critical nutrient concentrations and antagonistic and synergistic relationships among the nutrients of NFT‐grown young tomato plants

Critical concentrations of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca), magnesium (Mg), iron (Fe), zinc (Zn), and manganese (Mn) with respect to dry matter yield end antagonistic and synergistic relationships among these nutrients were studied in which tomato (Lycopersicon esculentum L.) was grown in recirculating nutrient solution (NFT). Increments of nutrient elements in the nutrient solution increased the proportional rate of the corresponding nutrient elements. Increasing levels of N negatively correlated with plant P and positively correlated with Ca, Fe, and Zn. Iron and Mn contents of the plants were increased and N, K, Ca, and Mg were decreased as a function of P applied. Increases in K in the nutrient solution caused increases in the concentrations of K, N, P, and Zn, and decreases in the concentration of Ca and Fe. Applied Ca increased the concentrations of Ca and N, and decreased the concentrations of P, Mg, Fe, Zn, and Mn. Potassium, Ca, and Fe contents of the plants were decreased and Zn increased, while N, P, and Mn were not affected by the increasing levels of external Mg. Iron suppressed the plant Mg, Zn, and Mn contents. Synergism between Zn and Fe was seen, while P, K, Ca, Mg, and Mn contents were not affected by Zn levels. Potassium, Ca, Mg, and Fe were not responsive to applied Mn, however, N and P contents of the plants were decreased at the highest levels of Mn.     

Acidulated activation of phosphate rock enhances release,lateral transport and uptake of phosphorus and trace metals upon direct-soil application

Phosphate rock (PR) was activated via acidulation with HCl, EDTA, and oxalic acid to enhance its reactivity. The release, lateral transport, and uptake of phosphorus (P) along with trace metals from pristine and activated PRs were investigated in a soil micro-block system over a period of 27 days, using wheat (Triticum aestivum L.) plants. Significantly (p < 0.05) higher amounts of available soil P, Fe, Mn, and Zn were released from all the PRs after application to soil within first 9 days of seedling transplantation, while the release of other trace metals (Cd, Co, Cr, Cu, Ni, and Pb) was minimal (<1.2 mg kg^?1). On cumulative basis, APR-O (oxalic acid activated PR) was the most efficient amendment releasing 164% more available P, followed by APR-E (EDTA activated PR) releasing 130% more available P, compared to the pristine PR. Similar results were also observed in the release of available Fe, Mn, Zn, and other trace metals. The highest diffusive mass fluxes for available P, Mn, Fe, and Zn in soil were observed after 3 days of seedling transplantation, which reduced subsequently. The uptake of P, Fe, Mn, and Zn by wheat plants was increased by 394%, 715%, 92%, and 91%, respectively, in APR-O application compared to the pristine PR, while it was increased by 280%, 188%, 16%, and 27%, respectively, in APR-E application compared to the pristine PR. Subsequently, APR-O and APR-E amendments resulted in enhanced shoot lengths, root lengths, shoot dry matter, and root dry matter contents of wheat plants. Hence, it was concluded that activation of PR with oxalic acid and EDTA prior to direct soil application may enhance the reactivity of PR and could serve as a cost-effect fertilization strategy for higher wheat crop production.     

Review of Trends in Strawberry Research from 1960 to 2016

A review of publications on “Strawberry” was done by using the Scopus database for the period 1960–2016. A total of 10,400 articles were found in the database and analyzed using a variety of measures. Results show that publication increased exponentially from 1960 to 2016. Multiple authors are collaborating in strawberry research. Acta Horticulturae was the most productive journal. The United States of America was the most productive country. The greatest portion of the research was concerned with medicinal benefits of strawberries to humans. This work will be useful to researchers in identifying trends in strawberry research.     

Simulating the Production of Rice Genotypes by Flood Management and End-Season Water Stress Conditions Using AquaCrop Model

ABSTRACT

The present study was conducted to assess the ability of AquaCrop model in predicting of grain and biological yield of rice genotypes in water management. A two-year field experiment was conducted at the experimental farm of the Iranian Rice Research Institute in Rasht, Iran from 2016 to 2017. The experiment was established in a split-plot design with two irrigation management (continuous submergence and end season water stress) as the main plot, fourth rice genotypes as the sub-plot and three replications. The goodness-of-fit between observed and simulated grain yield and final biomass was assessed by means of the coefficient of determination (R ²), the absolute and normalized root mean square errors (RMSE). The RMSE_n of predicting grain yield at calibration and evaluation stages was in the range of 6–12% and 6–8% for biological yield. The results indicated that AquaCrop model is suitable to predict grain yield and biological yield of rice genotypes in northern Iran. AquaCrop model can be used to determine optimization strategies to improve the water consumption of rice genotypes.     

Site-Specific Nitrogen Management in Rice Using Remote Sensing and Geostatistics

Proper doses of nitrogenous fertilizer are most important for rice production system because a large part of the nitrogen may be lost if it is not applied judiciously. A study was conducted covering five blocks of Balasore and two blocks of Bhadrak districts. Soil samples were collected randomly, and field visit was conducted during peak vegetative stage of rice. Two approaches have been used in this study for estimating the site-specific nitrogen (N) requirement in the study area. In one approach, geostatisical analysis and kriging was used to develop the soil test–based N recommendation map by which a minimum of 72 kg N ha^?1 and maximum of 94 kg N ha^?1 were recommended. In a second approach, remote sensing was used and N recommendation map was developed using the moderate-resolution imaging spectroradiometer (MODIS) leaf area index (LAI) and normalized difference vegetation index (NDVI) satellite data, and a minimum requirement of 60 kg N ha^?1 and maximum of 120 kg N ha^?1 was estimated through this approach.     

Nutrients management strategies to improve yield and quality of sugar beet in semi-arid regions

The objective of this study was to evaluate the effects of organic and inorganic fertilizers on the yield and quality of sugar beet genotypes (Beta vulgaris L.). Therefore, a field trial was carried out in Peshawar, Pakistan, during the winters in 2012–2013. The field experiment was conducted in a randomized complete block design with split plots, having three replications. Fertilizer treatments (control, composted manure Higo Organic Plus at 5 t ha^?1, Maxicrop Sea Gold seaweed extract at 5 L ha^?1, farm yard manure at 10 t ha^?1, inorganic nitrogen–phosphorus (NP) at 90:60 kg ha^?1, NP at 120:90 kg ha^?1 and NP at 150:120 kg ha^?1) were allotted to main plots, while genotypes (Sandrina, Serenada and Kawe Terma) were allotted to the sub-plots. Plots treated with the application of NP at 120:90 kg ha^?1 produced the highest beet yield (76.4 t ha^?1) and sugar yield (11.1 t ha^?1), and had the second highest polarizable sugar content (14.52%) and more economic return (Rs. 553,000 per hectare) as compared to control plots. Sugar beet genotype Serenada had significantly higher beet yield (55.5 t ha^?1) and sugar yield (7.9 t ha^?1) and a higher economic return (Rs. 380,000 per hectare) than the other genotypes. Sugar beet genotype Serenada supplied with NP at 120:90 kg ha^?1is recommended for the general cultivation in the agro-climatic conditions of Peshawar valley.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

Effects of ambient gaseous pollutants on photosynthesis,growth, yield and grain quality of selected crops grown at different sites varying in pollution levels

In recent decades, ambient gaseous pollution has increased due to anthropogenic activities worldwide. The studies to evaluate the adverse effects of ambient pollutants on commonly grown food crops are still limited, especially in Asian countries like Pakistan. The present study was conducted to measure the ambient pollutants in different sites of Faisalabad and their impact on growth and yield of wheat, mung bean and peas. Plants were grown in pots and placed at three sites named as control (Wire house of Government College University, Faisalabad), low pollution (LP) (Farm Area of Ayub Agricultural Research Institute) and high pollution (HP) (GT Chowk, Faisalabad) sites. Results showed that ambient ozone (O₃) concentration was highest at HP site followed by LP site and was below AOT40 in control site. Ambient pollutants caused foliar injury in crops and decreased plant height, leaf area, biomass and grain yield. Pollutants caused a reduction in photosynthetic pigments, stomatal conductance and net photosynthetic rate and grain protein contents in all three crops. In conclusion, the ambient O₃ level was highest at HP site, this current O₃ level and other pollutants decreased the growth and yield of important food crops.     

Dynamic oxygen mapping in the root zone by fluorescence dye imaging combined with neutron radiography

Purpose  

The rooted zone of a soil, more precisely the rhizosphere, is a very dynamic system. Some of the key processes are water uptake and root respiration. We have developed a novel method for measuring the real-time distribution of water and oxygen concentration in the rhizosphere as a biogeochemical interface in soil. This enables understanding where and when roots are active in respect to root respiration and water uptake and how the soil responds to it.     

Assessment of Bacterial and Fungal Aerosol in Different Residential Settings

The concentration and size distribution of bacterial and fungal aerosol was studied in 15 houses. The houses were categorized into three types, based on occupant density and number of rooms: single room in shared accommodation (type I), single bedroom flat in three storey buildings (type II) and two or three bedroomed houses (type III). Sampling was undertaken with an Anderson six-stage impactor during the summer of 2007 in the living rooms of all the residential settings. The maximum mean geometric concentration of bacterial (5,036 CFU/m³, ± 2.5, n?=?5) and fungal (2,124 CFU/m³, ± 1.38, n?=?5) aerosol were in housing type III. The minimum levels of indoor culturable bacteria (1,557 CFU/m³, ±1.5, n?=?5) and fungal (925 CFU/m³, ±2.9, n?=?5) spores were observed in housing type I. The differences in terms of total bacterial and fungal concentration were less obvious between housing types I and II as compared to type III. With reference to size distribution, the dominant stages for culturable bacteria in housing types I, II and III were stage 3 (3.3–4.7 μm), stage 1 (7 μm and above) and stage 5 (1.1–2.1 μm), respectively. Whereas the maximum numbers of culturable fungal spores were recovered from stage 2 (4.7–7 µm), in housing type I, and from stage 4 (2.1–3.3 μm) in both type II and III houses. The average geometric mean diameter of bacterial aerosol was largest in type I (4.7 μm), followed by type II (3.89 μm) and III (1.96 μm). Similarly, for fungal spores, type I houses had the highest average mean geometric diameter (4.5 μm), while in types II and III the mean geometric diameter was 3.57 and 3.92 μm, respectively. The results indicate a wide variation in total concentration and size of bioaerosols among different residential settings. The observed differences in the size distributions and concentrations reflect their variable airborne behaviour and, as a result, different risks of respiratory exposure of the occupants to bioaerosols in various residential settings.