The toxicity of selected acaricides against five stored product mites under laboratory assay

In laboratory tests, the toxicity of acaricides targeted against house dust mites was tested on five species of stored product mites (Acarus siro, Aleuroglyphus ovatus, Carpoglyphus lactis, Lepidoglyphus destructor, and Tyroborus lini). The formulations of benzyl-benzoate, benzyl-benzoate/permethrin/pyriproxyfen, and neem were diluted in water and applied to filter paper in an unventilated chamber. The mortality of mites was observed after 24 h of exposure to acaricide-impregnated filter paper. All of the tested acaricides were toxic to all of the mite species. There were significant differences in mortality among the species and the acaricides. Benzyl-benzoate/permethrin/pyriproxyfen was the most effective, followed by benzyl-benzoate and neem. L. destructor (LD₅₀ 0.01–0.11 μg) was the most sensitive mite species, followed by A. siro (LD₅₀ 0.04–0.12 μg), T. lini (LD₅₀ 2–21 μg), A. ovatus (LD₅₀ 3–18 μg), and C. lactis (LD₅₀ 4–64 μg). Based on the highly toxic effects of the tested acaricides against the stored product mites, the acaricides should be considered as a potential tool in the control of stored product mites, although next screening is necessary.     

Curing and degradation processes of cement-bonded particleboard by supercritical CO<Subscript>2</Subscript> treatment

This study examined the effects of supercritical CO₂ treatment on the curing and degradation of cementbonded particleboard (CBP). Significant correlations were found between the supercritical CO₂ treatment and mechanical properties during both curing and degradation processes. Internal bond (IB) strength, modulus of rupture (MOR), and modulus of elasticity (MOE) values of CBP achieved their maximums by supercritical CO₂ treatment in 30 min. These conditions indicated that supercritical CO₂ treatment accelerates the curing process rapidly and enhances the mechanical properties of the CBP. However, these values decreased in treatment from 60 min to 10 days and had a negative effect on board performance, indicating that supercritical CO₂ treatment over a longer time span leads to degradation of the CBP. Furthermore, X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observation clarified that the mechanisms of degradation are directly affected by the mineralogical composition of the system, in par ticular, by the calcium carbonate content as caused by carbonation.     

Hidden in the woods? Meaning,determining, and practicing of ‘common welfare’ in the case of the German public forests

This article addresses the German debate on the issue of the common welfare designation of public forests. In the first part, drawing on two case studies, the political discourse on the issue is introduced. Two major competing ‘story lines’ can be made out that are both based on a long tradition of controversially discussed concepts of regulatory forest policy. While they both emphasise that common welfare services in forestry run counter to profit orientation, they fundamentally differ with regard to the consequences for forest policy, e.g., considering the degree of state intervention. Afterwards, an overview on the scientific debate on common welfare in the German context is given, and different concepts of common welfare determination are distinguished. Existing approaches of common welfare determination in German forest policy are related to these concepts and discussed. It is argued that the common welfare designation of the public forest is only insufficiently implemented by the actual governance arrangements. Based on this consideration, eventually, the implementation of a procedural concept of common welfare operationalisation in Germany’s public forests at the local level is proposed. While such a concept will not solve all complex problems related to the determination of common welfare in public forestry, it would notably contribute to a more operational definition of common welfare in public forestry and a more informed public debate on the issue.     

Biomass allocation and foliage heteroblasty in hard pine species respond differentially to reduction in rooting volume

Rooting space is considered as a resource in plants, but comparative studies on the biomass allocation plasticity in response to rooting volume (RV) are rare. We compared responses in growth, biomass allocation and ontogenetic heteroblasty in nine hard pine species of contrasted ecology. Seedlings were cultivated in containers of 0.2, 0.5, 1.0, 2.8 and 7 L for two growing seasons (425 days). Reduction in RV caused a reduction in plant absolute and relative growth rate and biomass allocated to stems but it increased biomass allocated to roots. RV affected to a lesser extent and in a less consistent direction allocation to leaves. Species that grew faster (higher relative growth rate) had a steeper decrease in growth with the reduction in RV. Ontogenetic heteroblasty, evaluated as the proportion of secondary needles in the needle biomass, showed highly different plasticity patterns in response to RV. Decrease in RV caused negligible or no change either in the most ontogenetically delayed Mediterranean pines or in the most ontogenetically advanced pines, the mesic Pinus sylvestris and P. uncinata. By contrast, ontogenetically intermediate species showed steep reaction norms in response to reduction in RV. While P. pinaster and P. brutia showed marked rejuvenation, P. nigra accelerated the development of adult foliage.     

Cost-effective strategies to conserve boreal forest biodiversity and long-term landscape-level maintenance of habitats

Setting aside parcels of land is the main conservation strategy to reduce the rate of biodiversity loss worldwide. Because funding for biological conservation is limited, it is important to distinguish the most efficient ways to use it. Here, we assess implications of alternative measures to conserve biodiversity in managed boreal forest landscapes. We calculated four alternative spatio-temporal scenarios and compared these to the current management regime over 100-year time period. In the alternative scenarios, a fixed amount of funding was invested in (1) permanent large reserves (each tens of ha in size), (2) permanent small reserves (each a few ha in size), (3) temporary small reserves (based on 10-year contracts with private land owners), and (4) green-tree retention (small groups of trees retained on clear-cuts). To assess biodiversity implications, we used habitat suitability indices to calculate overall habitat availability for five groups of red-listed and habitat-specific species associated with decaying spruce logs. The possibilities for timber harvests did not differ among the scenarios, but biodiversity performance was different. The scenarios with permanent reserves tended to outperform other scenarios, suggesting that conservation policies based on permanent reserves are the most cost-efficient in the long term. Results, however, varied among time scales and species groups. In the short term, a strategy of investment in temporary small reserves was the most efficient. Habitat for species associated with old spruce dead-wood and preferring shade was rare throughout all simulations, and therefore, it is likely that these species cannot be sustained in managed forests. Species that live on fresh dead-wood and are associated with forest edges coped well in all scenarios suggesting that such species will persist in managed landscapes without additional conservation efforts. Explicit definition of conservation objectives and time frames for conservation action are thus prerequisites for successful conservation planning.     

Determining suitability of thermal development models to estimate temperature parameters for embryonic development of <Emphasis Type="Italic">Sitona lepidus</Emphasis> Gyll. (Coleoptera: Curculionidae)

The clover root weevil, Sitona lepidus Gyll. is a pest of clovers (Trifolium spp.), particularly white clover (T. repens). Larva feeding severely impairs the capacity of white clover to fix atmospheric nitrogen, by attacking the nitrogen-fixing root nodules. Development of the egg stage was studied at six different constant temperatures ranging from 9 to 30°C to improve the basis for phenological forecasts. Development occurred over the entire range of temperatures, although hatching percentage at 30°C was only 24.4% compared to 90.1% at 28.5°C. Developmental time decreased with increase in temperature from 9 to 28.5°C but increased markedly at 30°C. At 28.5°C, the embryo development period was the shortest (10.35 days); whereas at 9°C, this parameter was the longest (55.08 days). Using linear regression, the lower threshold temperature was calculated 4.38°C and the thermal constant was 236.45 degree-days. The relationship between constant temperature and developmental rate was evaluated using nine models. The suitability of the models was evaluated based on eight indicators (R ², RSS, R _adj², AIC, BIC, AICC, W _j , and Z _i ). Of the nonlinear models, the Logan-6, Sharpe and DeMichele, and Lactin models were the most accurate at calculating t _opt of 27, 27.50, and 28°C, respectively. The results suggest that of the three models (Lactin, Briere, and Hilbert and Logan), that estimated critical temperatures, (t _min, t _opt, and t _max), Lactin gave the most suitable fit of data. This response of S. lepidus to temperature can be used for developing phonological models to predict the timing of egg hatch which are important for management programs targeting the weevil.     

FTIR-ATR-based prediction and modelling of lignin and energy contents reveals independent intra-specific variation of these traits in bioenergy poplars

Background  

There is an increasing demand for renewable resources to replace fossil fuels. However, different applications such as the production of secondary biofuels or combustion for energy production require different wood properties. Therefore, high-throughput methods are needed for rapid screening of wood in large scale samples, e.g., to evaluate the outcome of tree breeding or genetic engineering. In this study, we investigated the intra-specific variability of lignin and energy contents in extractive-free wood of hybrid poplar progenies (Populus trichocarpa × deltoides) and tested if the range was sufficient for the development of quantitative prediction models based on Fourier transform infrared spectroscopy (FTIR). Since lignin is a major energy-bearing compound, we expected that the energy content of wood would be positively correlated with the lignin content.