Effect of Days Post-Partum, Breed and Ovum Pick-Up Scheme on Bovine Oocyte Recovery and Embryo Development

The objective of this study was to investigate (i) the effect of two different ovum pick-up (OPU) schemes (once vs twice weekly aspirations) on oocyte recovery rate, quality and subsequent in vitro embryo development, (ii) the influence of days post-partum on oocyte recovery and (iii) possible differences in OPU results from two different herds. In group A, OPU was performed twice weekly in two Holstein Friesian (HF) and three Danish Red and White (DRW) cows from a private herd. In the research herd, two groups of eight HF cows were investigated: group B (OPU once weekly) and group C (OPU twice weekly). The collected oocytes were subsequently submitted to in vitro embryo production. More oocytes were recovered from the private herd when compared with the research herd. In the research herd, the twice weekly scheme aspirated more oocytes than the once weekly scheme. The quality of the retrieved oocytes was significantly different between groups B and C but not between groups A and C, and HF cows yielded higher quality oocytes than DRW cows (p = 0.029). Oocytes from group C showed higher level of embryonic development than group B oocytes. No differences in blastocyst rates were observed between groups A and C. Session affected the number of retrieved oocytes and subsequent developmental rates, with these being lower in the first compared with the last sessions. Finally, there was no significant effect of days post-partum in the number and quality of the retrieved oocytes, likely because of the small group size and high variation between sessions.     

Fluorescent Stain Method for the Simultaneous Determination of Mitochondrial Potential and Integrity of Plasma and Acrosomal Membranes in Boar Sperm

The purpose of this study was to validate a technique for simultaneous evaluation of the plasma, acrosomal and mitochondrial membranes in boar spermatozoa, using an association of fluorescent probes: Propidium iodide (PI), fluorescein isothiocyanate-conjugated Pisum sativum agglutinin (FITC-PSA) and JC-1. Three ejaculates from each of four different boars, all showing motility >or=80% and abnormal morphology 相似文献   

Progesterone and Caspase-3 Activation in Equine Cyclic Corpora Lutea

Soon after ovulation, the newly formed corpus luteum (CL) starts secreting progesterone (P(4)), necessary for implantation. The CL, an ovarian transient endocrine organ, undergoes growth and regression throughout its life span. The objective of this study was to evaluate if caspase-3 mediates cell death in the equine cyclic luteal structures and relate it to luteal endocrine function. Blood and luteal tissue were collected during the breeding season after slaughter from 38 randomly assigned cycling mares. Luteal tissues were classified as corpora haemorrhagica (CH; n = 7); mid luteal phase corpora lutea (Mid-CL; n = 17); late or regressing corpora lutea (Late-CL; n = 9) and corpora albicans (CA; n = 5). Plasma P(4) concentration, determined by radioimmunoassay, showed a significant increase from CH to Mid-CL (p < 0.001), followed by a decrease to Late-CL (p < 0.001) and CA (p < 0.001). Caspase-3 processing and poly (ADP) ribose polymerase (PARP) degradation were assessed by western blotting. Active caspase-3 was twofold increased in Mid-CL, Late-CL and CA as compared with CH (p < 0.05). Immunocytochemistry also showed a significant increase in caspase-3 expression in large luteal cells in all structures when compared with CH (p < 0.05). Consistently, the endogenous caspase-3 substrate, PARP, was markedly degraded from CH to CA (p < 0.05). In fact, the ratio of full-length to degraded PARP showed a significant decrease from CH to Mid-CL, Late-CL and CA (p < 0.05). Finally, the decrease in P(4) from Mid- to Late-CL coincided with no further increases in apoptosis. In conclusion, these results suggest that the effector caspase-3 of apoptosis, might play an important role during luteal tissue involution in the mare, even though its relationship with P(4) remains to be elucidated.     

Supercritical fluid impregnation of selected wood species with tebuconazole

The effects of pressure and temperature on supercritical fluid impregnation of tebuconazole were evaluated on Douglas-fir, western red cedar, red alder, white spruce, and white oak. Higher pressure markedly enhanced both the retention and distribution of tebuconazole in these species. When the rate of pressure release was altered at the ends of treatments of Douglas-fir, results varied. Generally, a higher rate of venting increased the steepness of the preservative gradient inward from the surface. Elevated pressures also affected some wood properties. Western red cedar and white spruce showed collapse, while the other three species were free of such defects. Modulus of Elasticity (MOE) and Modulus of Rupture (MOR) tended to decline with higher pressure in western red cedar and white spruce, but the differences were rarely significant. No significant changes in MOE/MOR occurred with the other 3 species. Received 9 November 1998     

Simultaneous Measurement of Local Gain and Electron Density in X-ray Lasers

X-ray lasers (XRLs) have experimental average gains that are significantly less than calculated values and a persistently low level of spatial coherence. An XRL has been used both as an injected signal to a short XRL amplifier and as an interferometer beam to measure two-dimensional local gain and density profiles of the XRL plasma with a resolution near 1 micrometer. The measured local gain is in agreement with atomic models but is unexpectedly spatially inhomogeneous. This inhomogeneity is responsible for the low level of spatial coherence observed and helps explain the disparity between observed and simulated gains.     

Modeling internal temperature changes of timber poles during ACA treatment

Summary The temperature-time-location relationships during steam conditioning and pressure treatment of timber poles using ammoniacal copper arsenate (ACA) have been studied and a new mathematical model that incorporates both the thermal properties of the poles and the parameters of the treatment process is discussed. Prediction equations and charts are presented that show the minimum required steaming time to satisfy the 1982 Rural Electrification Authority (REA) purchase specification, i.e. a center temperature above 150 °F (65.5 °C) for 2 hours. A six hour steaming time, commonly used for ACA treatment, has been found to be too short to bring poles with diameters larger than about 40 cm to the required sterilization conditions. Therefore longer steaming times, predicted using the methods given here, are recommended. The temperature of the preservative used does not appear to be a major factor in determining the maximum temperature achieved at the center of a pole, but it can influence the length of time the pole is above 65.5 °C.Symbols D pole diameter, cm - k₁ rate of surface temperature change during vacuuming, °C/h - K₂ rate of surface temperature change early in the pressure period, °C/h - J₀ Bessel function of the first kind of order zero - J₁ Bessel function of the first kind of order one - r radial location in a pole measured from the center, cm - R pole radius, cm - T interior temperature of a pole during preservative treatment, °C - T_f final preservative temperature, °C - T_mid average of the steam and the final preservative temperatures, °C - t₀ initial temperature of a pole, °C - T_s temperature of the steam used for conditioning the poles, °C - T₁ surface temperature at the end of the vacuum period, °C - t time measured from the opening of the steam valve for steaming, h - t_above time the center of a pole remained above 65.5°C during preservatives treatment, h - t_c1 total time required for the surface temperature to reach T_f, °C - t_pr time elapsed at which initial vacuuming stops and pressure is applied, h - t_stm minimum required steaming time used, h - t_vc time elapsed at which initial vacuuming starts, h - thermal diffusivity, cm²/h - _n Roots of a particular characteristic equation - _d the time delay period between initial flow of steam and surface temperature response, h     

Maquiladora Employment Dynamics in Nuevo Laredo

ABSTRACT The Nuevo Laredo maquiladora sector has grown enormously during the last two decades. The short‐term time series characteristics of this portion of the regional economy are analyzed in an attempt to quantify the trends underlying this remarkable performance. Parameter estimation is accomplished via linear transfer function (LTF) analysis. Data are drawn from the January 1990–December 2000 sample period. Empirical results indicate that real wage rates, maquiladora plants, U.S. industrial activity, and the real exchange rate of the peso play significant roles in determining month‐to‐month fluctuations in maquiladora employment. Furthermore, sub‐sample forecast simulation exercises are conducted as an additional means for verifying model reliability. Empirical results indicate that the forecasts generated with the LTF model are less accurate than those associated with a simple random walk procedure for twelve separate step‐length periods.