Alteration in intestinal morphologic features associated with extensive large-colon resection in horses

Light microscopy, morphometry, and scanning electron microscopy were used to examine the mucosal morphologic features of 7 intestinal specimens (3 from the small intestine; 4 from the large intestine) from each of 8 horses 1 year after sham operation (group 1; n = 3) or extensive large-colon resection (group 2; n = 5). Qualitative light microscopic examination did not reveal differences between groups, but morphometry revealed significantly (P less than 0.05) greater intercrypt area and distance in horses with colon resection and this was most pronounced in the cecum and remaining right ventral and dorsal colon. Crypt area and depth were similar for horses with colon resection and sham operation (P greater than 0.05). Qualitative evaluation of the scanning electron micrographs revealed more prominent crypt orifices in the large intestine of horses with colon resection. The larger intercrypt distance in the colon of horses with resection was not an obvious feature of the qualitative evaluation of the surface with scanning electron microscopy. Small intestinal morphologic features were variable and significant differences were not detected between horses with sham operation and colon resection. Horses adapted to extensive large-colon resection within 1 year by increasing the absorptive (intercrypt) surface area of the remaining large intestine.     

VERTEBRAL OSTEOSCLEROSIS IN A CAT SECONDARY TO RHABDOMYOSARCOMA

A 5–year–old cat was presented for pelvic limb weakness. Sclerosis of the vertebral body of T–10 was visible on thoracic radiographs. A compressive lesion at this area was noted on myelography. A tumor was partially removed at surgery, but the cat was killed because of poor postoperative response. Rhabdomyosarcoma was diagnosed at necropsy, with bone marrow necrosis and myelofibrosis, and new bone proliferation of the body of T–10. Causes of bone necrosis are discussed.     

Prevalence and seasonal incidence of larval and adult cestode infections of sheep and goats in eastern Ethiopia

A study on the prevalence and seasonal incidence of cestode parasite infections of sheep and goats was carried out in eastern Ethiopia for 2 years (May 2003-April 2005). During this period, viscera including liver, lungs, heart, kidneys and the gastro-intestinal tract were collected from 655 sheep and 632 goats slaughtered at four abattoirs located in the towns of Haramaya, Harar, Dire Dawa and Jijiga. At the abattoirs the abdominal, thoracic and pelvic cavities as well as the muscle surfaces of all animals were visually examined for the presence of larval (cystic) stages of cestode parasites. The viscera were transported within 24 h to the parasitology laboratory of Haramaya University and were examined for larval and adult cestodes following standard procedures. The most prevalent metacestodes (larval cestodes) were Cysticercus ovis (Taenia ovis), Cysticercus tenuicollis (T. hydatigena) and hydatid cysts (Echinococcus granulosus). In sheep, the overall prevalence was 26% for C. ovis, 79% for C. tenuicollis, and 68% for hydatid cysts. Similarly, for goats, the corresponding prevalence was 22%, 53% and 65%, respectively. The difference between sheep and goats in prevalence of C. tenuicollis was significant. The high prevalence of hydatid cysts in both sheep and goats indicates that cystic echinococcosis/hydatidosis is a public health problem in these regions which requires implementation of control measures, including public health education, strict meat inspection and control of stray dogs. The results of the survey also implies that infections of small ruminants with these metacestodes are responsible for condemnation of substantial quantities of affected organs and muscles and therefore of direct economic importance. Intestinal infections with adult tapeworms of Moniezia expansa, Avitellina centripunctata and Stilesia globipunctata, and bile duct infections with Stilesia hepatica were also common in both sheep and goats. In sheep, the overall prevalence of these tapeworms were 61%, 20%, 24% and 39%, respectively. Similarly, the overall prevalence of these parasites in goats was 53%, 21%, 27% and 36%, respectively.     

Molecular assay for the detection of Cochlosoma anatis in house flies and turkey specimens by polymerase chain reaction

A 1520 bp region of Cochlosoma anatis mtDNA 16S gene was subjected to DNA sequencing and a 466 bp portion was compared with other protozoan 16S sequences to develop PCR primers specific for C. anatis. This PCR diagnostic method allowed identification of C. anatis from house flies, Musca domestica L., turkey gut, and fecal samples within 6 h after field-collected samples reached the laboratory. House flies detected carrying C. anatis using the diagnostic 374 bp amplicons represented the first record of this protozoan in house flies.     

Effect of dietary energy source on in vitro substrate utilization and insulin sensitivity of muscle and adipose tissues of Angus and Wagyu steers

Angus (n = 8; 210 kg of BW) and 7/8 Wagyu (n = 8; 174 kg of BW) steers were used to evaluate the effects of dietary energy source on muscle and adipose tissue metabolism and insulin sensitivity. Steers were assigned to either a grain-based (corn) or hay-based (hay) diet and fed to similar final BW. At slaughter, LM and s.c. and i.m. adipose tissue samples were collected. Portions of the LM and adipose tissues were placed immediately in liquid N for later measurement of glycolytic intermediates. Fresh LM and s.c. and i.m. adipose tissues were incubated with [U-(14)C]glucose to assess glucose metabolism in vitro. All in vitro measures were in the presence of 0 or 500 ng/mL of insulin. Also, s.c. and i.m. adipose tissues were incubated with [1-(14)C]acetate to quantify lipid synthesis in vitro. Glucose-6-phosphate and fructose-6-phosphate concentrations were 12.6- and 2.4-fold greater in muscle than in s.c. and i.m. adipose tissues, respectively. Diet did not affect acetate incorporation into fatty acids (P = 0.86). Insulin did not increase conversion of glucose to CO(2), lactate, or total lipid in steers fed hay but caused an increase (per cell) of 97 to 110% in glucose conversion to CO(2), 46 to 54% in glucose conversion to lactate, and 65 to 160% in glucose conversion to total lipid content in adipose tissue from steers fed corn. On a per-cell basis, s.c. adipose tissue had 37% greater glucose oxidation than i.m. adipose (P = 0.04) and 290% greater acetate incorporation into fatty acids than i.m. adipose (P = 0.04). Insulin addition to s.c. adipose tissue from corn-fed steers failed to stimulate glucose incorporation into fatty acids, but exposing i.m. adipose tissue from corn-fed steers to insulin resulted in a 165% increase in glucose incorporation into fatty acids. These results suggest that feeding hay limited both glucose supply and tissue capacity to increase glucose utilization in response to insulin without altering acetate conversion to fatty acids. Because s.c. adipose tissue consistently utilized more acetate and oxidized more glucose than did i.m. adipose, these results suggest that hay-based diets may alter i.m. adipose tissue metabolism with less effect on s.c. adipose tissue.     

Tasco supplementation: effects on carcass characteristics, sensory attributes, and retail display shelf-life

Two hundred crossbred cattle (Bos indicus x Bos taurus) were supplemented with 2% Tasco (Ascophyllum nodosum) in a commercial finishing facility to evaluate marbling score, USDA quality grade, sensory traits, and retail display shelf life. Treatment animals (n = 100) received a steam-rolled corn (Zea mays)-based diet containing 2% Tasco meal (DM basis), for 14 d beginning at d 45 of the finishing period and again 14 d before slaughter. Control animals (n = 100) received a steam-rolled corn (Zea mays)-based diet without Tasco at identical feeding periods. Carcasses from Tasco-fed cattle exhibited greater marbling scores (P = 0.003) than controls. There were no treatment effects (P > 0.05) on sensory, shear, or purge attributes of striploin or inside round steaks with the exception of inside round steaks from Tasco animals having a greater initial tenderness (P = 0.03) and lower off-flavor score (P = 0.002) than control steaks. The LM samples from Tasco-fed cattle had a greater percentage of ether extractable fat (P = 0.001) and lower percentage of protein (P = 0.001) than controls. Inside round samples from treated animals exhibited a greater percentage of moisture (P = 0.03) than control steaks. Visual lean color of striploin steaks was not affected by Tasco supplementation (P = 0.26); however, steaks from Tasco-treated animals were more uniform and had less discoloration and browning than those from controls (P = 0.005, 0.04, and 0.05, respectively). Inside round visual scores and instrument values reflected similar treatment responses (P < 0.05), with a majority of the effects on muscle redness (CIE a*, hue angle) and measures of discoloration. Tasco steaks were generally more red and less discolored during extended postmortem aging and retail exposure (P < 0.05). The results from this study indicate that short-term supplementation of 2% Tasco meal in feedlot cattle increases carcass quality and prolonged retail shelf life.     

Failure mode and bending moment of canine pancarpal arthrodesis constructs stabilized with two different implant systems

Objective— To compare failure mode and bending moment of a canine pancarpal arthrodesis construct using either a 2.7 mm/3.5 mm hybrid dynamic compression plate (HDCP) or a 3.5 mm dynamic compression plate (DCP).
Study Design— Paired in vitro biomechanical testing of canine pancarpal arthrodesis constructs stabilized with either a 2.7/3.5 HDCP or 3.5 DCP.
Sample Population— Paired cadaveric canine antebrachii (n=5).
Methods— Pancarpal arthrodesis constructs were loaded to failure (point of maximum load) in 4-point bending using a materials-testing machine. Using this point of failure, bending moments were calculated from system variables for each construct and the 2 plating systems compared using a paired t-test. To examine the relationship between metacarpal diameter and screw diameter failure loads, linear regression was used and Pearson' correlation coefficient was calculated. Significance was set at P <.05.
Results— HDCP failed at higher loads than DCP for 9 of 10 constructs. The absolute difference in failure rates between the 2 plates was 0.552±0.182 N m, P =.0144 (95% confidence interval: −0.58 to 1.68). This is an 8.1% mean difference in bending strength. There was a significant linear correlation r=0.74 ( P -slope=.014) and 0.8 ( P -slope=.006) between metacarpal diameter and failure loads for the HDCP and 3.5 DCP, respectively.
Conclusion— There was a small but significant difference between bending moment at failure between 2.7/3.5 HDCP and 3.5 DCP constructs; however, the difference may not be clinically evident in all patients.
Clinical Relevance— The 2.7/3.5 HDCP has physical and mechanical properties making it a more desirable plate for pancarpal arthrodesis.     

Assessment of stiffness and strength of 4 different implants available for equine fracture treatment: a study on a 20 degrees oblique long-bone fracture model using a bone substitute

OBJECTIVE: To compare the mechanical properties of 4 stabilization methods for equine long-bone fractures: dynamic compression plate (DCP), limited contact-DCPlate (LC-DCP), locking compression plate (LCP), and the clamp-rod internal fixator (CRIF--formerly VetFix). STUDY DESIGN: In vitro mechanical study. SAMPLE POPULATION: Bone substitute material (24 tubes) was cut at 20 degrees to the long axis of the tube to simulate an oblique mid-shaft fracture. METHODS: Tubes were divided into 4 groups (n=6) and double plated in an orthogonal configuration, with 1 screw of 1 implant being inserted in lag fashion through the "fracture". Thus, the groups were: (1) 2 DCP implants (4.5, broad, 10 holes); (2) 2 LC-DCP implants (5.5, broad, 10 holes); (3) 2 LCP implants (4.5/5.0, broad, 10 holes) and 4 head locking screws/plate; and (4) 2 CRIF (4.5/5.0) and 10 clamps in alternating position left and right of the rod. All constructs were tested in 4-point bending with a quasi-static load until failure. The implant with the interfragmentary screw was always positioned on the tension side of the construct. Force, displacement, and angular displacement at the "fracture" line were determined. Construct stiffness under low and high loads, yield strength, ultimate strength, and maximum angular displacement were determined. RESULTS: None of the implants failed; the strength of the bone substitute was the limiting factor. At low loads, no differences in stiffness were found among groups, but LCP constructs were stiffer than other constructs under high loads (P=.004). Ultimate strength was lowest in the LCP group (P=.01), whereas yield strength was highest for LCP constructs (409 N m, P=.004). CRIF had the lowest yield strength (117 N m, P=.004); no differences in yield strength (250 N m) were found between DCP and LC-DCP constructs. Differences were found for maximum angular displacement at the "fracture" line, between groups: LPC相似文献