Sequence tagged site markers to rsp1, rsp2, and rsp3 genes for resistance to septoria speckled leaf blotch in barley

ABSTRACT Five random amplified polymorphic DNA markers, two in coupling (OPAH5(545C), and OPBA12(314C)) and three in repulsion phase (UBC285(158R), OPC2(441R), and OPB17(451R)), closely linked to Rsp genes conferring resistance to Septoria speckled leaf blotch (SSLB), were identified using bulked segregant analysis in three F(2) populations, each containing a Rsp gene. These markers were converted into the sequence tagged site (STS) markers SUBC285, SOPC2, SOPAH5, and SOPBA12. Another STS marker (MWG938) linked to Rsp2 in coupling phase was also identified in an F(2) population from the cross Robust/CIho 4780. The STS markers were tested on a set of 42 resistant and susceptible barley germplasm lines and 98 landraces. The expected sizes of marker fragments associated with each allele at Rsp loci were present in resistant or susceptible accessions. Efficiency of marker-assisted selection (MAS) for Rsp1, Rsp2, and Rsp3 using STS markers were evaluated in three F(23) populations in the greenhouse and the field. Results of testing F(23) progeny demonstrated that the accuracy of MAS was, with one exception, greater than 97% in the greenhouse and in two field locations (90% in the Osnabrock, ND trial for Rsp2). The STS markers closely linked to Rsp genes also identified the SSLB resistance corresponding to Rsp1, Rsp2, or Rsp3 in gene pyramiding F(2) populations. The STS markers tightly linked to Rsp genes may be useful for M and for pyramiding with other genes in barley breeding for SSLB resistance.     

Evidence of shedding of porcine circovirus type 2 in milk from experimentally infected sows

Detection of porcine circovirus type 2 (PCV2) was to evaluate the milk from experimentally infected sows using polymerase chain reaction (PCR) and virus isolation. Six pregnant sows were inoculated intranasally with PCV2 at 93 days of gestation, and milk samples were collected from all sows at 1, 3, 6, 9, 12, 15, 18, 21, 24, and 27 days of lactation. PCV2 was detected in milk as early as day 1 of lactation in all six sows. Thereafter, all infected sows remained positive by PCR for PCV2 in milk until 27 days of lactation. In addition, PCV2 itself was isolated from milk collected from a virus-infected sows. These results suggest that PCV2 may be shed in milk following infection of pregnant sows by the virus.     

Transmission biology of Raspberry latent virus, the first aphid-borne reovirus

Raspberry latent virus (RpLV) is a newly characterized reovirus found in commercial raspberry fields in the Pacific Northwest (PNW). Thus far, all members of the plant reoviruses are transmitted in a replicative, persistent manner by several species of leafhoppers or planthoppers. After several failed attempts to transmit RpLV using leafhoppers, the large raspberry aphid, commonly found in the PNW, was tested as a vector of the virus. The virus was transmitted to new, healthy raspberry plants when inoculated with groups of at least 50 viruliferous aphids, suggesting that aphids are vectors of RpLV, albeit inefficient ones. Using absolute and relative quantification methods, it was shown that the virus titer in aphids continued to increase after the acquisition period even when aphids were serially transferred onto fresh, healthy plants on a daily basis. Transmission experiments determined that RpLV has a 6-day latent period in the aphid before it becomes transmissible; however, it was not transmitted transovarially to the next generation. To our knowledge, this is the first report of a plant reovirus transmitted by an aphid. Phylogenetic analyses showed that RpLV is related most closely to but distinct from Rice ragged stunt virus (RRSV), the type member of the genus Oryzavirus. Moreover, the conserved nucleotide termini of the genomic segments of RpLV did not match those of RRSV or other plant reoviruses, allowing us to suggest that RpLV is probably the type member of a new genus in the Reoviridae comprising aphid-transmitted reoviruses.     

Acaricidal activities of the active component of Lycopus lucidus oil and its derivatives against house dust and stored food mites (Arachnida: Acari)

BACKGROUND: Recent studies have focused on materials derived from plant extracts as mite control products against house dust and stored food mites because repeated use of synthetic acaricides had led to resistance and unwanted activities on non‐target organisms. The aim of this study was to evaluate the acaricidal activity of materials derived from Lycopus lucidus against Dermatophagoides farinae, D. pteronyssinus and Tyrophagus putrescentiae. RESULTS: The LD₅₀ values of L. lucidus oil were 2.19, 2.25 and 8.45 µg cm^?2 against D. farinae, D. pteronyssinus and T. putrescentiae. The acaricidal constituent of L. lucidus was isolated by chromatographic techniques and identified as 1‐octen‐3‐ol. In a fumigant method against D. farinae, the acaricidal activity of 1‐octen‐3‐ol (0.25 µg cm^?2) was more toxic than N,N‐diethyl‐m‐toluamide (DEET) (36.84 µg cm^?2), followed by 3,7‐dimethyl‐1‐octen‐3‐ol (0.29 µg cm^?2), 1‐octen‐3‐yl butyrate (2.32 µg cm^?2), 1‐octen‐3‐yl acetate (2.42 µg cm^?2), 3,7‐dimethyl‐1‐octene (9.34 µg cm^?2) and benzyl benzoate (10.02 µg cm^?2). In a filter paper bioassay against D. farinae, 1‐octen‐3‐ol (0.63 µg cm^?2) was more effective than DEET (20.64 µg cm^?2), followed by 3,7‐dimethyl‐1‐octen‐3‐ol (1.09 µg cm^?2). CONCLUSION: 1‐Octen‐3‐ol and 3,7‐dimethyl‐1‐octen‐3‐ol could be useful as natural agents for the management of three mite species. Copyright © 2011 Society of Chemical Industry     

Ohm's law survives to the atomic scale

As silicon electronics approaches the atomic scale, interconnects and circuitry become comparable in size to the active device components. Maintaining low electrical resistivity at this scale is challenging because of the presence of con?ning surfaces and interfaces. We report on the fabrication of wires in silicon--only one atom tall and four atoms wide--with exceptionally low resistivity (~0.3 milliohm-centimeters) and the current-carrying capabilities of copper. By embedding phosphorus atoms within a silicon crystal with an average spacing of less than 1 nanometer, we achieved a diameter-independent resistivity, which demonstrates ohmic scaling to the atomic limit. Atomistic tight-binding calculations con?rm the metallicity of these atomic-scale wires, which pave the way for single-atom device architectures for both classical and quantum information processing.     

Quantum algorithms for quantum field theories

Quantum field theory reconciles quantum mechanics and special relativity, and plays a central role in many areas of physics. We developed a quantum algorithm to compute relativistic scattering probabilities in a massive quantum field theory with quartic self-interactions (φ(4) theory) in spacetime of four and fewer dimensions. Its run time is polynomial in the number of particles, their energy, and the desired precision, and applies at both weak and strong coupling. In the strong-coupling and high-precision regimes, our quantum algorithm achieves exponential speedup over the fastest known classical algorithm.     

Breaking the speed limits of phase-change memory

Phase-change random-access memory (PCRAM) is one of the leading candidates for next-generation data-storage devices, but the trade-off between crystallization (writing) speed and amorphous-phase stability (data retention) presents a key challenge. We control the crystallization kinetics of a phase-change material by applying a constant low voltage via prestructural ordering (incubation) effects. A crystallization speed of 500 picoseconds was achieved, as well as high-speed reversible switching using 500-picosecond pulses. Ab initio molecular dynamics simulations reveal the phase-change kinetics in PCRAM devices and the structural origin of the incubation-assisted increase in crystallization speed. This paves the way for achieving a broadly applicable memory device, capable of nonvolatile operations beyond gigahertz data-transfer rates.     

Isotropic events observed with a borehole array in the Chelungpu fault zone, Taiwan

Shear failure is the dominant mode of earthquake-causing rock failure along faults. High fluid pressure can also potentially induce rock failure by opening cavities and cracks, but an active example of this process has not been directly observed in a fault zone. Using borehole array data collected along the low-stress Chelungpu fault zone, Taiwan, we observed several small seismic events (I-type events) in a fluid-rich permeable zone directly below the impermeable slip zone of the 1999 moment magnitude 7.6 Chi-Chi earthquake. Modeling of the events suggests an isotropic, nonshear source mechanism likely associated with natural hydraulic fractures. These seismic events may be associated with the formation of veins and other fluid features often observed in rocks surrounding fault zones and may be similar to artificially induced hydraulic fracturing.