Zirconium-Modified Activated Sludge as a Low-Cost Adsorbent for Phosphate Removal in Aqueous Solution

A highly effective zirconium-modified activated sludge (Zr(IV)-AS) adsorbent was prepared from activated sludge and applied to remove phosphate from aqueous solutions by batch and column experiments. Characterized results revealed that zirconium was successfully loaded onto the activated sludge (AS), and the specific surface area and pore volume were substantially improved after zirconium loading on the AS. Zr(IV)-AS exhibited a high adsorption affinity for phosphate and the maximum adsorption amount was 27.55 mg P·g^?1 at 25 °C. Adsorption isotherms of phosphate could be described by the Langmuir model, and the adsorption kinetics were well described by the pseudo-second-order model. Phosphate adsorption on Zr(IV)-AS increased monotonically with decreasing solution pH. The presence of SO₄^2? in water resulted in slightly decreased phosphate adsorption on the adsorbent even at a high concentration (25 mmol/L), and a greater influence of HCO₃^? on adsorption could be ascribed to the increased solution pH with the addition of the HCO₃^?. Column adsorption experimental results showed that the adsorbent has excellent phosphate adsorption properties and that the effluent can meet the requirement of phosphorus in the national wastewater discharge standard of China. Phosphate-saturated Zr(IV)-AS can be effectively desorbed in 0.1 mol L^?1 NaOH solution, and the regenerated adsorbent still possessed the high capacity. The adsorption between the adsorbent and the phosphate is due to the electrostatic interaction and anionic exchange at the surface of the Zr(IV)-AS. Furthermore, this approach provides a possibility of treating wastewater with waste and has the potential for industrial applications for the removal of phosphate from wastewater.     

Evaluation of palygorskite for remediation of Cd-polluted soil with different water conditions

Purpose

The study aimed at comparing the effects of different water managements on soil Cd immobilization using palygorskite, which was significant for the selection of reasonable water condition.

Materials and methods

Field experiment was taken to discuss the in situ remediation effects of palygorskite on Cd-polluted paddy soils, under different water managements, using a series of variables, including pH and extractable Cd in soils, plant Cd, enzyme activity, and microorganism number in soils.

Results and discussion

In control group, the pH in continuous flooding was the highest under three water conditions, and compared to conventional irrigation, continuous flooding reduced brown rice Cd by 37.9%, and brown rice Cd in wetting irrigation increased by 31.0%. In palygorskite treated soils, at concentrations of 5, 10, and 15 g kg^?1, brown rice Cd reduced by 16.7, 44.4, and 55.6%; 13.8, 34.5, and 44.8%; and 13.1, 36.8, and 47.3% under continuous flooding, conventional irrigation, and wetting irrigation (p < 0.05), respectively. The enzyme activity and microbial number increased after applying palygorskite to paddy soils.

Conclusions

Continuous flooding was a good candidate as water management for soil Cd stabilization using palygorskite. Rise in soil enzyme activity and microbial number proved that ecological function regained after palygorskite application.

     

水肥耦合对当归产量和品质的影响效应研究

探索水肥耦合对当归品质和产量的影响效应,为当归GAP规范化种植中的水肥调控提供理论依据。采用水肥双因素试验,通过二元二次多项式拟合灌水量、施肥量与当归产量和主要品质指标（阿魏酸含量）的关系,建立影响效应模型,并对其进行检验分析和相关性分析。结果表明：在灌水一定的情况下,随着施肥量的增加,当归的产量先增加后减少;在施肥一定情况下,随着灌水量的增加,当归的产量也是先增加后减少,当归的最高产量出现在中水中肥区,即灌水量1073.97 m3/hm2,施肥量808.97 kg/hm2,最大产量为15804.36 kg/hm2;在灌水量一定的条件下,随着施肥的增加当归的阿魏酸含量先增加后降低,在施肥量一定的条件下,随着灌水量的增加当归的阿魏酸含量也是先增加后降低,当归的阿魏酸含量最高出现在中高水中高肥区,即灌水量1491.42 m3/hm2,施肥量863.55 kg/hm2,阿魏酸最高含量为2.41 mg/g。合理有效的灌溉施肥使当归达到优质高产。     

Capturing genetic variability and selection of traits for heat tolerance in a chickpea recombinant inbred line (RIL) population under field conditions

Chickpea is the most important pulse crop globally after dry beans. Climate change and increased cropping intensity are forcing chickpea cultivation to relatively higher temperature environments. To assess the genetic variability and identify heat responsive traits, a set of 296 F_8–9 recombinant inbred lines (RILs) of the cross ICC 4567 (heat sensitive) × ICC 15614 (heat tolerant) was evaluated under field conditions at ICRISAT, Patancheru, India. The experiment was conducted in an alpha lattice design with three replications during the summer seasons of 2013 and 2014 (heat stress environments, average temperature 35 °C and above), and post-rainy season of 2013 (non-stress environment, max. temperature below 30 °C). A two-fold variation for number of filled pods (FPod), total number of seeds (TS), harvest index (HI), percent pod setting (%PodSet) and grain yield (GY) was observed in the RILs under stress environments compared to non-stress environment. A yield penalty ranging from 22.26% (summer 2013) to 33.30% (summer 2014) was recorded in stress environments. Seed mass measured as 100-seed weight (HSW) was the least affected (6 and 7% reduction) trait, while %PodSet was the most affected (45.86 and 44.31% reduction) trait by high temperatures. Mixed model analysis of variance revealed a high genotypic coefficient of variation (GCV) (23.29–30.22%), phenotypic coefficient of variation (PCV) (25.69–32.44%) along with high heritability (80.89–86.89%) for FPod, TS, %PodSet and GY across the heat stress environments. Correlation studies (r = 0.61–0.97) and principal component analysis (PCA) revealed a strong positive association among the traits GY, FPod, VS and %PodSet under stress environments. Path analysis results showed that TS was the major direct and FPod was the major indirect contributors to GY under heat stress environments. Therefore, the traits that are good indicators of high grain yield under heat stress can be used in indirect selection for developing heat tolerant chickpea cultivars. Moreover, the presence of large genetic variation for heat tolerance in the population may provide an opportunity to use the RILs in future-heat tolerance breeding programme in chickpea.     

Effects of inbreeding on nodal root system morphology and architecture of white clover (<Emphasis Type="Italic">Trifolium repens</Emphasis> L.)

Plants of white clover (Trifolium repens L.) cultivar Crau, a self-fertile Crau genotype, and nine generations of inbred progeny were raised in sand culture in a glasshouse experiment. Digital images of the root systems were made and root morphological characteristics were determined on all the plants. Root architectural parameters were measured on the Crau parent and the S₁, S₄, S₆, and S₉ inbred lines. The clover roots became shorter and thicker with inbreeding but the number of root tips per plant was unchanged. Root architecture (branching pattern) was largely unaffected by inbreeding. It is concluded that inbreeding white clover will lead to shorter, thicker roots, and reduced nutrient uptake efficiency compared with the parent clover. The degree to which these deleterious traits are overcome during the development of F₁ hybrids needs to be determined.     

玫瑰花不同部位清除DPPH·能力的比较研究

通过不同取材,研究了红色、金黄色、白色和粉红色玫瑰花花瓣、花蕊、花萼和叶片清除DPPH能力,结果表明,红色和金黄色玫瑰花瓣对DPPH清除能力比白色和粉红色强;四种玫瑰花花蕊都有较强的DPPH清除能力,且无显著差异;粉红色和金黄色玫瑰花花萼具有较强的DPPH清除能力;在较高的浓度下四种玫瑰花的叶片同样有较强的DPPH清除能力.在实验条件下,红色、金黄色花瓣以及不同花蕊50%DPPH清除率(rs50)都小于芦丁的rs50.     

The inheritance of chemical phenotype in <Emphasis Type="Italic">Cannabis sativa</Emphasis> L. (III): variation in cannabichromene proportion

The mechanism that controls the proportion of cannabichromene (CBC), a potential pharmaceutical, in the cannabinoid fraction of Cannabis sativa L. is explored. As with tetrahydrocannabinol (THC) and cannabidiol (CBD), CBC is an enzymatic conversion product of the precursor cannabigerol (CBG). CBC is reported to dominate the cannabinoid fraction of juveniles and to decline with maturation. This ontogeny was confirmed in inbred lines with different mature chemotypes. A consistent CBC presence was found in early leaves from a diverse clone collection, suggesting that CBC synthase is encoded by a fixed locus. Morphological variants possessing a ‘prolonged juvenile chemotype’ (PJC), a substantial proportion of CBC persisting up to maturity, are presented. PJC is associated with a reduced presence of floral bracts, bracteoles, and capitate-stalked trichomes. Genetic factors causing these features were independent of the allelic chemotype locus B that was previously postulated and regulates THC and CBD synthesis and CBG accumulation. In contrast to previously described Cannabis chemotypes, the cannabinoid composition of PJCs showed plasticity in that reduced light levels increased the CBC proportion. The ability of PJC plants to enable the production of pharmaceutical raw material with high CBC purity is demonstrated.     

Production of mutants with high cold tolerance in spring canola (<Emphasis Type="Italic">Brassica napus</Emphasis>)

A major factor affecting spring canola (Brassica napus) production in Canada is killing frosts during seedling development in the spring and seed maturation in the fall. The objective of this study was to explore the possibility of producing spring canola lines with mutations that have altered biochemical pathways that increase cold tolerance. The approach was to generate UV point mutations in cultured microspores followed by chemical in vitro selection of individual mutant microspores or embryos resulting in measurable alterations to various biochemical pathways with elevated levels of key defense signaling molecules such as, salicylic acid (SA), p-Fluoro-d,l-Phenyl Alanine (FPA), and jasmonic acid (JA). In addition, since proline (Pro) is known to protect plant tissues in the cold-induced osmotic stress pathway, mutants that overproduce Pro were selected in vitro by using three Pro analogues: hydroxyproline (HP), azetidine-2-carboxylate (A2C); and, 3,4-dehydro-d,l-proline (DP). Of the 329 in vitro selected mutant embryos produced, 74 were identified with significant cold tolerance compared to their donor parents through indoor freezer tests at −6°C, and 19 had better winter field survival than winter canola checks. All chemically selected mutant doubled haploids with increased cold tolerance compared well with parent lines for all seed quality and agronomic parameters. Development of increased frost tolerant cultivars should allow for spring canola to be produced in western Canada without compromising seed quality.     

DNA profiling and genetic diversity of Korean soybean (<Emphasis Type="Italic">Glycine max</Emphasis> (L.) Merrill) landraces by SSR markers

Approximately 7,000 accessions of Korean soybean (Glycine max (L.) Merrill) landraces, largely composed of three collections, the Korea Atomic Energy Research Institute’s soybean (KAS), the Korean Crop Experiment Station’s soybean (KLS) and the Korean Agricultural Development and Technology Center’s soybean (KADTC) collections, have been conserved at the Rural Development Administration (RDA) genebank in Korea. The accessions within collections were classified based on their traditional uses such as sauce soybean (SA), sprouted soybean (SP), soybean for cooking with rice (SCR), and OTHERS. A total of 2,758 accessions of Korean soybean landraces were used to profile and to evaluate genetic structure using six SSR loci. A total of 110 alleles were revealed by at the six SSR loci. The number of alleles per SSR locus ranged from 9 to 39 in Satt187 and Satt_074, respectively. The number of alleles ranged from 87 in the KADTC collection to 96 in the KLS collection, and from 63 in the SCR group to 95 in the SP group. Nei’s average genetic diversity ranged from 0.68 to 0.70 across three collections, and 0.64 to 0.69 across the usage groups. The average between-group differentiation (G _st) was 0.9 among collections, and 4.1 among the usage groups. The similar average diversity among three collections implies that the genetic background of the three collections was quite similar or that there were a large number of duplicate accessions in three collections. The selection from the four groups classified based upon usage may be a useful way to select accessions for developing a Korean soybean landrace core collection at the RDA genebank. DNA profile information of accessions will provide indications of redundancies or omissions and aid in managing the soybean collection held at the RDA genebank. The information on diversity analysis could help to enlarge the genetic diversity of materials in breeding programs and could be used to develop a core collection.     

Discrimination of ‘San Marzano’ accessions: A comparison of minisatellite, CAPS and SSR markers in relation to morphological traits

‘San Marzano’ (SM) is one of the most widely known tomato (Solanum lycopersicum L.) cultivars, and is a classic example of a local variety with a premium value. Unfortunately, the original cultivated form is underrepresented in the Protected Denomination of Origin (PDO) area because of the incidence of contaminant and phenotypically similar genotypes. Our aim was to examine the ability of three DNA marker systems (minisatellite, cleaved amplified polymorphic sequence (CAPS) and simple sequence repeat (SSR)) to reveal the genetic diversity of tomato accessions that were, based on a morphological analysis, very similar. The data indicate that both minisatellites and SSRs can be used to genetically distinguish the analysed materials. Furthermore, these two marker systems depict relationships consistent with the hierarchal pattern obtained by the morphological data. As locally cultivated tomato accessions are often characterised by some degree of genetic variability, our results will be valuable in facilitating the purification, management and breeding of tomato germplasms. The differences between the marker systems employed are also discussed in relation to their usefulness in the agro-food chain.