Azimuthal variations of sap flux density within Japanese cypress xylem trunks and their effects on tree transpiration estimates

Sap flow techniques are practical tools for estimating tree transpiration. Though many previous studies using sap flow techniques did not consider azimuthal variations of sap flux density (F _d) on xylem trunk to estimate tree transpiration, a few studies reported that ignoring the azimuthal variations in F _d could cause large errors in tree transpiration estimates for some tree species. Therefore, examining azimuthal variations in F _d for major plantation tree species is critical for estimating tree transpiration. Using the thermal dissipation method, we examined azimuthal variations in F _d in six trees of Japanese cypress Chamaecyparis obtusa (Sieb. et Zucc.) Endl., which is one of the most common plantation tree species in Japan. We recorded considerable variations among F _d at four different azimuthal directions. The F _d value for one aspect was more than 100% larger than those for the other aspects. We calculated differences between tree transpiration estimates based on F _d for one to three azimuthal directions and those based on F _d for four aspects. The differences relative to tree transpiration estimates based on F _d for four aspects were typically 30, 20, and 10% in accordance with the F _d for one, two, and three measurement aspects, respectively. This finding indicates that ignoring azimuthal variations could cause large errors in tree transpiration estimates for Japanese cypress.     

Differences in biomass allocation patterns between saplings of two co-occurring Mediterranean oaks as reflecting different strategies in the use of light and water

Production and biomass allocation patterns, the growth rates of aboveground biomass, and crown traits were examined in saplings of the deciduous Quercus faginea and the evergreen Q. ilex to determine whether differences in these traits might account for the greater mortality during periods of drought undergone by Q. faginea. Strong differences were observed in almost all the traits analyzed, which suggests that the two species use different strategies to cope with the main limiting factors for woody seedling establishment in Mediterranean environments: excess light and low water availability. In Q. faginea, sapling design seems to be oriented to maximize light capture and, hence, leaf productivity during the short life span of the leaf biomass. Thus, the seedlings of Q. faginea showed crown traits that permit self-shading to be minimized: longer shoots with more spaced leaves that result in lower leaf area index than in Q. ilex. In addition, the larger area per unit leaf biomass in Q. faginea leads to a larger interceptive leaf area per unit plant mass and to higher light capture. These characteristics imply higher investments in woody tissues (SWR) that permit the plants to support a wide canopy and facilitate water transport to meet the strong transpiratory demands of a canopy with such characteristics. By contrast, in Q. ilex, saplings are apparently designed to guarantee leaf survival against temperature extremes and photoinhibition through avoidance of excessive radiation.     

Economics and Employment Generation of Bamboo-Based Enterprises: A Case Study from Eastern Bangladesh

An exploratory survey was carried out to assess economics and employment generation of the trade of bamboo and bamboo-based secondary products in the eastern Bangladesh, to obtain reliable information about their status, socio-economic significance, production and marketing. The study was undertaken over 30 bamboo-based enterprises in a suburban market of eastern Bangladesh, to investigate regional product details, economic profitability and employment opportunities. The sample entrepreneurs, corresponding to about 25% of the bamboo enterprise population were interviewed using a semi-structured questionnaire. About 202 full and part-time workers were employed in the factories, under categories of artisan (who manufactured secondary products). The average number of worker’s in the large, medium and small factories were 9 (artisan 40%), 6.45 (artisan 35%) and 5 (artisan 25%) respectively. The study revealed that there was always a satisfied demand of skilled artisans. Most of the workers were relatively newly employed (not more than 5 years). The daily wage rate varied between 70 and 130 Tk. ($US 1 equals approximately 70 Bangladeshi Taka (Tk.), as at December 2008). Bambusa balcooa was the most utilized species (39.96%) in terms of monetary value. The price of a single B. balcooa culm in the local market was Tk. 160–210. Nine sizes of articles under seven bamboo categories were identified, these being bera (36″ × 120″ and 72″ × 96″), bookshelf (36″ × 24″), chaluni (12″ × 12″), chatai (48″ × 60″ and 36″ × 48″), jhuri, rickshaw hood and tukri. Net average profit per article was the highest for rickshaw hoods (Tk. 400 at the retailer stage). The total expected annual income for an enterprises from all articles types sold was estimated to be Tk. 85,800. Three distinct marketing channels were identified for selling bamboo and value-added secondary products. The study also generated policy implications for effective management of bamboo-based enterprises.     

Management approach using simple indices of deer density and status of understory vegetation for conserving deciduous hardwood forests on a regional scale

We investigated the validity and efficiency of a survey using sight per unit effort (SPUE) of sika deer and shrub-layer decline rank (SDR), which is an index of decline in the physical structure of a whole stand caused by sika deer, based on data collected on a broad scale. This survey was to be used to manage a deer population in order to conserve a forest ecosystem. First, we evaluated the spatial and temporal scales of deer density that are most appropriate for predicting decline in the status of understory vegetation. The model with SPUE calculated in a buffer with a radius of 4.5 km using data for the past 4 years was found to be the best. We showed that our knowledge of the relationship between deer density and status of shrub-layer vegetation is improved by identifying the most suitable spatial and temporal scales of SPUE for predicting SDR. Next, we quantified the effects of SPUE and environmental components on SDR in stands. We found that SPUE had the greatest effect on SDR among all explanatory variables. Moreover, the area under the curve (AUC) was large in a model that only used SPUE (AUC = 0.718). This result suggests that the variation in SDR among stands was explained well by SPUE regardless of differences in the forest environment. Furthermore, we identified the effective values of SPUE for preventing shrub-layer vegetation from declining through deer density control. We conclude that a management system based on SPUE and SDR is a simple and valid method for managing deer populations in order to conserve forest ecosystems.     

Difference between sprouting traits of <Emphasis Type="Italic">Cercidiphyllum japonicum</Emphasis> and <Emphasis Type="Italic">C. magnificum</Emphasis>

Cercidiphyllum japonicum and C. magnificum are deciduous tree species that produce large numbers of sprouts. They are found mainly in riparian and/or disturbed areas. C. japonicum is distributed in the montane zone in Japan, whereas C. magnificum is distributed mostly in the subalpine zone of central Japan. However, the two species sometimes coexist, e.g., on the talus slope at the valley head of the Chichibu Mountains. We investigated differences in sprouting traits in these two species by comparing class distributions of sprout diameter at breast height (DBH) and heights of individuals on the talus slope. Sprout DBH and individual height were smaller in C. magnificum as compared to C. japonicum. Moreover, the analysis of the DBH-class distribution of each species indicated that C. magnificum had numerous small sprouts and experienced high mortality, whereas C. japonicum had fewer small sprouts and low mortality. It is likely that the sprouting traits of C. magnificum make it more adapted to severe conditions in the subalpine zone than those of C. japonicum.     

A novel application of the ecological field theory to the definition of physiographic and climatic potential areas of forest species

A new approach to the definition of physiographic and climatic potential areas for forest species, based on the ecological field theory, is outlined in this paper. The proposed formulation is tested on the Spanish juniper (Juniperus thurifera L.), using data from 883 permanent and temporary plots throughout its distribution area in the Spanish autonomous region of Castilla y León. The suitability of the territory for the species is assessed by previously studying its habitat, which in turn is analyzed through physiographic and climatic parameters. This new method is rooted in an additive index that depends on the Mahalanobis distance in the parametric space that evaluates the ecological resemblance between the studied site and each of the points defining the parametric habitat. Thereby the ecological potential of any site within the territory can be established, integrated in a geographical information systems and accordingly charted. The results are compared with those obtained with the methodology traditionally used by Spanish foresters (factorial index), showing that the overall potential area is similar in size but quite different in its distribution.     

Allometric models for estimation of aboveground carbon stocks in improved fallows in eastern Zambia

This paper presents allometric functions for estimation of C stocks in aboveground tree biomass in 2-year-old improved fallows in eastern Zambia. A total of 222 individual trees representing 12 tree species were destructively harvested for C analysis by LECO CHN-1000 analyzer. Allometric models relating collar diameter (D₁₀) and total tree height (H) to stem and total aboveground C stocks were developed using data from tree fallows. Logarithmically transformed power functions displayed a good ability to stabilize variance of aboveground C stocks and showed a good fit (84 < R ² < 99) with a bias of 0.7–3.6%. D₁₀ alone and in combination with H explained most of the variability in total aboveground C stocks. Validation of the species-specific and generalized models with field data indicated that they accurately predicted aboveground tree C stocks. Generalized C estimation functions were also validated and described 73–97% of variability in aboveground C stocks with an average unsigned deviation of 1.5–4.9%. The C functions will serve as a vital tool for predicting and monitoring C pool sizes in long-term studies and agroforestry projects, especially where destructive sampling is not possible.     

Changes in enzyme activities,soluble sugars and phenols during in vitro adventitious shoot regeneration from leaflet explants of <Emphasis Type="Italic">Albizia procera</Emphasis> (Roxb.) Benth

Changes in nitrate reductase, i.e. NR (E.C. 1.7.1.1) activity, peroxidase (E.C. 1.11.1.14) activity, soluble sugars and phenols were monitored at various time intervals from day 0 to 60 during in vitro adventitious shoot regeneration from leaflet explants of Albizia procera (Roxb.) Benth. The explants were incubated on semi-solid Murashige and Skoog medium supplemented with 2.6 g l^?1 Phytagel^®, 2.5% sucrose, 10 μM BAP, 1 μM NAA and 15 μM AgNO₃. NR activity, soluble sugars and phenols exhibited initial sharp rise on around day 20 followed by steep decline on day 25, whereas peroxidase activity peaked on day 50, highlighting significance of early input of nitrogen and energy and late emergence of lignification process for cellular differentiation and organization into adventitious shoot primordia. Morpho-anatomical changes in leaflets at various stages of in vitro adventitious shoot formation also followed the endogenous biochemical pattern.     

Propagating the errors of initial forest variables through stand- and tree-level growth simulators

Developments in the field of remote sensing have led to various cost-efficient forest inventory methods at different levels of detail. Remote-sensing techniques such as airborne laser scanning (ALS) and digital photogrammetry are becoming feasible alternatives for providing data for forest planning. Forest-planning systems are used to determine the future harvests and silvicultural operations. Input data errors affect the forest growth projections and these effects are dependent on the magnitude of the error. Our objective in this study was to determine how the errors typical to different inventory methods affect forest growth projections at individual stand level during a planning period of 30 years. Another objective was to examine how the errors in input data behave when different types of growth simulators are used. The inventory methods we compared in this study were stand-wise field inventory and single-tree ALS. To study the differences between growth models, we compared two forest simulators consisting of either distance-independent tree-level models or stand-level models. The data in this study covered a 2,000-ha forest area in southern Finland, including 240 sample plots with individually measured trees. The analysis was conducted with Monte Carlo simulations. The results show that the tree-level simulator is less sensitive to errors in the input data and that by using single-tree ALS data, more precise growth projections can be obtained than using stand-wise field inventory data.     

Relative competitive abilities and productivity in Ginkgo and broad bean and wheat mixtures in southern China

Ginkgo (Ginkgo biloba L.) is a multi-value deciduous tree species grown for the production of nuts, timber and foliage for medicinal products. Understanding the ecological and biological basis for Ginkgo agroforestry systems is essential for the design of optimum Ginkgo-crop species combinations. We established two greenhouse replacement series to examine interactions between Ginkgo and wheat (Triticum aestivum L.); and Ginkgo and broad bean (Vicia faba L.). The results showed that crop species were more competitive than Ginkgo at low Ginkgo density, but less competitive than Ginkgo at high Ginkgo density. Ginkgo: wheat ratio 5:1 and Ginkgo: broad bean ratio 5:1 had relative yield total (RYT) and relative land output (RLO) values of more than one and the largest total land output (TLO) values in respective mixtures. Therefore, these two ratios might be considered optimum Ginkgo: crop ratio for enhancing the combined biomass of the Ginkgo and crop in respective mixtures. Broad bean and wheat were more competitive than Ginkgo, which was less affected by wheat than by broad bean. However, there were compensatory interactions between Ginkgo and wheat, and Ginkgo and broad bean. There was significant belowground competition for soil N between Ginkgo and the two crop species in the Ginkgo/crop mixtures. The two mixtures outperformed monocultures of the individual species when comparing the mixtures with the crop monoculture system.