Responses of antioxidant enzymes in the needles of hinoki cypress (Chamaecyparis obtusa) seedlings to nutrient solutions containing various calcium/aluminum ratios

An attempt was made to examine the possible connection between the various ratios of calcium/aluminum (Ca/Al) in the nutrient solution of plant cultures and the active oxygen scavenging system of hinoki cypress (Chamaecyparis obtusa) seedlings. The hinoki cypress seedlings were transferred to nutrient solutions containing 5 mM AlCl₃ together with various concentrations of Ca(NO₃)₂ in pots containing glass beads and Teflon tips. The activities of superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX) and glutathione reductase (GR) in the needles were estimated at several stages during the 7-day treatment. The samples treated with the lower Ca/Al solutions show the highest SOD activities. The activities of APX and GR, both of them involved in the ascorbate-glutathione cycle, showed the same tendency with decrease to higher Ca/Al ratio. These results indicate that rhizospheric Ca might compete with Al and ameliorate Al toxicity on and in the roots, the Al stress is not transformed to the needles after a few days, and the ascorbate-glutathione cycle in the hinoki cypress needles might fluctuate and be suppressed by the rhizospheric Al stress during the 7 days. This work was supported in part by funding from the Japan Science & Technology Corporation, the CREST program 1996–2001, and the Center for Forest Decline Studies.     

Automatic detection of a damaged cutting tool during machining I: method to detect damaged bandsaw teeth during sawing

This paper presents an on-line method for detecting damaged teeth in the bandsaw using acoustic emission (AE) signal energy. The method is based on an analysis of differences in AE energies generated by normal and damaged teeth during sawing. Because of the difference in the amount of sawing, the AE energy was low for sawing by the damaged tooth and high for sawing by the normal tooth immediately after the damaged tooth. The ratio of AE energy for two successive teeth — a normal tooth immediately following a damaged tooth — was much greater than 1, whereas the ratio of AE energy for two successive normal teeth was close to 1. The results demonstrate that the technique using the AE energy ratio for two successive teeth is effective for on-line detection of damaged bandsaw teeth.Part of this paper was presented at the 9th Annual Meeting of the Chugoku Skikoku Branch of the Japan Wood Research Society, Tottori, October 1997     

Sparing effect of tramadol,lidocaine, dexmedetomidine and their combination on the minimum alveolar concentration of sevoflurane in dogs

BackgroundProblems associated with using inhalational anaesthesia are numerous in veterinary anaesthesia practice. Decreasing the amount of used inhalational anaesthetic agents and minimising of cardiorespiratory disorders are the standard goals of anaesthetists.ObjectiveThis experimental study was carried out to investigate the sparing effect of intravenous tramadol, lidocaine, dexmedetomidine and their combinations on the minimum alveolar concentration (MAC) of sevoflurane in healthy Beagle dogs.MethodsThis study was conducted on six beagle dogs. Sevoflurane MAC was determined by the tail clamp method on five separate occasions. The dogs received no treatment (control; CONT), tramadol (TRM: 1.5 mg kg^-1 intravenously followed by 1.3 mg kg^-1 h^-1), lidocaine (LID: 2 mg kg^-1 intravenously followed by 3 mg kg^-1 h^-1), dexmedetomidine (DEX: 2 μg kg^-1 intravenously followed by 2 μg kg^-1 h^-1), and their combination (COMB), respectively. Cardiorespiratory variables were recorded every five minutes and immediately before the application of a noxious stimulus.ResultsThe COMB treatment had the greatest sevoflurane MAC-sparing effect (67.4 ± 13.9%) compared with the other treatments (5.1 ± 25.3, 12.7 ± 14.3, and 40.3 ± 15.1% for TRM, LID, and DEX treatment, respectively). The cardiopulmonary variables remained within the clinically acceptable range following COMB treatment, although the mean arterial pressure was higher and accompanied by bradycardia.ConclusionsTramadol-lidocaine-dexmedetomidine co-infusion produced a remarkable sevoflurane MAC-sparing effect in clinically healthy beagle dogs and could result in the alleviation of cardiorespiratory depression caused by sevoflurane. Cardiorespiratory variables should be monitored carefully to avoid undesirable side effects induced by dexmedetomidine.     

Effect of oral administration of 3,3',4,4',5-pentachlorobiphyenl on the intestinal microbiota of Sprague–Dawley rats

The effect of the endocrine-disrupting chemical 3,3',4,4',5-pentachlorobiphyenl (PCB 126) on intestinal microbiota after oral administration, and the improvement of intestinal microbiota and feces quantity by the subsequent administration of Lactobacillus acidophilus or Lactobacillus reuteri was investigated. All the rats were given 100 μg/kg bodyweight of PCB 126. The changes in bacterial counts were confirmed using a culture method. The administration of PCB 126 tended to decrease the bacterial counts of lactobacilli (10^9.6−10^10.2 to 10^8.8−10^9.2) and bifidobacteria (10^5.3−10^6.1 to 10^3.6−10^4.2), and to increase those of Enterobacteriaceae (10^8.2−10^9.1 to 10^9.4−10^10.3) and staphylococci (10^6.6−10^7.4 to 10^7.2−10^8.4) compared to no PCB 126 administration. After administration of PCB 126, L. acidophilus or L. reuteri orally administered to rats caused Enterobacteriaceae and staphylococci counts to decrease, suggesting that the intestinal microbiota was improved by the lactobacilli. The administration of L. acidophilus and L. reuteri improved the balance of intestinal microbiota, and defecation volume returned to its normal level. L. acidophilus and L. reuteri have a remedial effect on intestinal microbiota affected by PCB 126 and can function to lessen accumulated PCB 126 volume.     

Dairy cattle behavior classifications based on decision tree learning using 3‐axis neck‐mounted accelerometers

Demand has been increasing recently for an automated monitoring system of animal behavior as a tool for the management of livestock animals. This study investigated the association between the behavior of dairy cattle and the acceleration data collected using three‐axis neck‐mounted accelerometers, as well as the feasibility of improving the precision of behavior classifications through machine learning. In total 38 Holstein dairy cows were used, and kept in four different farms. A logger was mounted to each collar to obtain acceleration data for calculating the activity level and variations. At the same time the behavior of the cattle was observed visually. Characteristic acceleration waves were recorded for eating, rumination, and lying, respectively; and the activity level and variations were significantly different among these behaviors (p < 0.01). Decision tree learning was performed on the data set from Farm A and validated its precision; which proved to be 99.2% in cross‐validation, and 100% in test data sets from Farms B to D. This study showed that highly precise classifications for eating, rumination, and lying is possible by using decision tree learning to calculate the activity level and variations of cattle based on the data obtained by three‐axis accelerometers mounted to a collar.     

Hair cortisol concentration in pre‐ and postpartum dairy cows,and its association with body condition,hock health,and reproductive status

The objective of this study was to investigate the profiles of hair cortisol concentrations as an index of chronic stress in dairy cows in association with their health, nutrition, and reproductive parameters. For 25 Holstein dairy cows, hair was collected from the tail switch ?19.2 ± 11.4, 44.8 ± 11.9, 103.0 ± 9.9, and 168.0 ± 9.7 days postpartum (L0, L1, L2, and L3, respectively). Body condition scores were negatively correlated with hair cortisol concentrations (r = ?0.255), and hock health scores were positively correlated with hair cortisol concentrations (r = 0.236, p < 0.05). Hair cortisol concentrations during the postpartum period showed different patterns according to the time of first artificial insemination (AI) and fertility. Cows that were submitted to first AI by 86 days postpartum showed a peak hair cortisol concentration at L1, whereas cows with delayed first AI had a peak at L2. The hair cortisol concentrations of subfertile (≥168 days) cows were significantly higher at L1 and L2 compared with L0, whereas hair cortisol concentrations of fertile cows (<168 days) were not different among the sampling times. These results indicate that cows with health problems appear to experience greater chronic stress, which may impair their reproductive function.     

Performance of coated carbide tools when grooving wood-based materials: effect of work materials and coating materials on the wear resistance of coated carbide tools

This paper presents the performance of coated carbide tools when grooving various density hardboards and wood-chip cement boards. Work materials of low density (about 0.8g/cm³) and high density (about 1.2g/cm³) were tested. The coating materials studied were chromium carbide, titanium carbonitride, and titanium carbide, which were synthesized on P30 carbide substrate using a chemical vapor deposition method; titanium nitride, chromium nitride, and titanium carbonitride were synthesized using the physical vapor deposition method. Cutting tests were performed during grooving at a cutting speed of 1000m/min and a feed rate of 0.1 mm/rev. The results of the study show that the coated carbide tools are more advantageous in reducing the progression of tool wear and retaining lower normal force and noise level when cutting both hardboard and wood-chip cement board of high density than was the uncoated carbide tool. The wear rate of the coated carbide tools for the wood-chip cement board increased more rapidly than that of the hardboard with increasing densities. Though the coated carbide tools suffered more wear with the low-density wood-chip cement board than with hardboard, their normal force and noise level were always lower for the low-density wood-chip cement board.Part of this paper was presented at the 11th Annual Meeting of the Chugoku Shikoku branch of the Japan Wood Research Society, Matsue, Shimane, September 25, 1999     

Effects of chemical treatments on ultra-high-yield pulping 1. Fiber separation

Summary Specially designed wood blocks from Norway spruce were used to study the nature of the fracture surfaces developed in shear using a tensile tester. In the case of the control (water-soaked blocks), the fracture in the latewood takes place mainly in the S₁ layer while in the earlywood the fracture occurs across the double cell wall. After dilute alkali treatment, some earlywood cells also fracture in the S₁ layer. For sulfite-treated samples, on the other hand, both earlywood and latewood fracture in the middle lamella.Financial support from the Empire State Paper Research Associates (ESPRA) is greatly appreciated     

Change in river water chemistry as affected by the confluence of forest drainage water in dairy farming area on Hokkaido Island, Northern Japan

We evaluated i) the difference in river water chemistry between a watershed mainly consisting of pasture and a watershed mainly consisting of forest, and ii) how the chemistry of river draining the pasture is influenced by that of the river draining the forest. We selected one river (designated as the T-river) draining the pasture (3,587 ha), and two rivers draining a forest (738 and 879 ha) in eastern Hokkaido, northern Japan. During higher river flow due to precipitation and thawing, the concentrations of NO ₃ ⁻ , SO ₄ ²⁻ , K⁺, Fe, and Al increased, suggesting the relative importance of the shallow soil layer as their source. On the other hand, Na⁺, Mg²⁺, Ca²⁺, and Si decreased, suggesting the relative importance of the source in a deep soil layer. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺, and Fe were higher in the T-river than in the forest drainage waters, suggesting the contribution of the excretion components from the milk cows. The Si concentration exhibited the opposite pattern. The concentrations of NO ₃ ⁻ , Cl⁻, SO ₄ ²⁻ , K⁺, Na⁺, Mg²⁺, Ca²⁺ (p<0.001), and Fe (p<0.05) in the T-river decreased after the confluence of the forest drainage waters, while Si concentration increased (p<0.001). The reason for the change in river chemistry was the confluence of the forest drainage waters. These findings suggested the environmental role of the forest in the dilution of the polluted river. Prof. S. Ohata, and Prof. H. Takeda, Graduate School of Agriculture, Kyoto University, facilitated this study. Prof. T. Sakai, Graduate School of Informatics, Kyoto University, offered this study some convenience. Dr. M. Sakimoto, and Dr. M. Katsuyama, Graduate School of Agriculture, Kyoto University, offered useful advise.