Effect of carbon dioxide-air concentration in the rapid curing process on the properties of cement-bonded particleboard

This study deals with the effects of carbon dioxide (CO₂)-air concentration in the rapid curing method on the properties of cement-bonded particleboard manufactured using conventional cold pressing as the setting method. The hydration of cement was examined using X-ray diffractometry, thermal gravimetry, and scanning electron microscopy. The results are as follows: (1) The properties of CO₂-cured boards improved with increasing CO₂ concentration. When 10% or 20% CO₂ was applied for 10 min of curing time, the properties of the CO₂-cured boards were comparable to those obtained by conventional 2-week curing. (2) The hydration process of cement could be accelerated within several minutes using CO₂ curing, even with a low concentration of 10%–20% CO₂; a reduction in calcium hydroxide was observed followed by rapid formation of calcium carbonate.     

Properties of kenaf core binderless particleboard reinforced with kenaf bast fiber-woven sheets

Kenaf composite panels were developed using kenaf bast fiber-woven sheets as top and bottom surfaces, and kenaf core particles as core material. During board manufacture, no binder was added to the core particles, while methylene diphenyldiisocyanate resin was sprayed to the kenaf bast fiber-woven sheet at 50 g/m² on a solids basis. The kenaf composite panels were made using a one-step steam-injection pressing method and a two-step pressing method (the particleboard is steam pressed first, followed by overlaying). Apart from the slightly higher thickness swelling (TS) values for the two-step panels when compared with the one-step panels, there was little difference in board properties between the two composite panel types. However, the two-step pressing operation is recommended when making high-density composite panels (>0.45 g/cm³) to avoid delamination. Compared with single-layer binderless particleboard, the bending strengths in dry and wet conditions, and the dimensional stability in the plane direction of composite panels were improved, especially at low densities. The kenaf composite panel recorded an internal bond strength (IB) value that was slightly low because of the decrease of core region density. The kenaf composite panel with a density of 0.45 g/cm³ (one-step) gave the mechanical properties of: dry modulus of rupture (MOR) 14.5 MPa, dry modulus of elasticity (MOE) 2.1 GPa, wet MOR 2.8 MPa, IB 0.27 MPa, TS 13.9%, and linear expansion 0.23%.     

Mechanical stress grading of tropical timbers without regard to species

Some reports have shown that for single species the correlation between modulus of elasticity (MOE) and modulus of rupture (MOR) in bending is quite high. Tropical timbers consist of hundreds of species that are difficult to identify. This report deals with the mechanical stress grading of tropical timber regardless of species. Nine timber species or groups of species with a total number of 1094 pieces measuring 60 × 120 × 3000 mm, were tested in static bending. The MOE was measured flat wise, while MOR was tested edge wise. Statistical analysis of linear regression with a dummy model and analysis of covariance were used to analyze the role of MOE and the effect of species on prediction of MOR. The analysis showed that using MOE as a single predictor caused under/overestimation for one or more species and/or groups of species. The accuracy of prediction would be increased with species identification. An allowable stress and reference resistance for species and/or groups of species were provided to compare with the prediction of strength through timber grading. The timber strength class for species and/or groups of species was also established to support the application of mechanical timber grading.     

Thermal insulation properties of wood-based sandwich panel for use as structural insulated walls and floors

Thermal insulation and warmth-keeping properties of thick plywood-faced sandwich panels with low-density fiberboard (plywood-faced sandwich, PSW), which were developed as wood-based structural insulation materials for walls and floors, are comprehensively clarified. The properties focused on were thermal conductivity (λ), thermal resistance (R), and thermal diffusivity (D). The results for PSW panels were compared with those for commercial wood-based boards, solid wood, and commercial insulators. The λ values were measured for PSW panels and their core and face elements. As a result, the composite theory of λ was found to be appropriate for PSW composites, because the calculated/experimental λ ratios were approximately 90%. The λ values for PSW panels with densities of 340 kg/m³ (PSW350) and 410kg/m³ (PSW400) were 0.070 and 0.077W/mK, respectively. The R values for PSW350 and PSW400 were 1.4 and 1.2m²K/W, and the D values were 0.00050 and 0.00046m²/h, respectively. Consequently, the PSW provided thermal insulation properties superior to those of the boards and in terms of warmth-keeping properties were greatly advantageous over the insulators. These advantages were due to the moderate densities of PSW panels. The PSW panel with sufficient thickness showed remarkably improved thermal resistance compared with those of the boards.     

Degradation of a nonphenolic β-O-4 lignin model dimer by horseradish peroxidase with 1-hydroxybenzotriazole

Nonphenolic β-O-4 lignin substructure model dimer, 1,3-dihydroxy-2-(2,6-dimethoxyphenoxy)-1-(4-ethoxy-3-methoxyphenyl)propane (I) was degraded by horseradish peroxidase (HRP) in the presence of hydrogen peroxide and 1-hydroxybenztriazole (HBT). 4-Ethoxy-3-methoxybenzoic acid (II), 1-(4-ethoxy-3-methoxyphenyl)-3-hydroxypropanone (III), 2,3-dihydroxy-1-(4-ethoxy-3-methoxyphenyl)-1-formyloxypropane (IV), 2,3-dihydroxy-1-(4-ethoxy-3-methoxyphenyl)propanone (V), 1-(4-ethoxy-3-methoxyphenyl)-1,2,3-trihydroxypropane (VI), 1-(4-ethoxy-3-methoxyphenyl)-1,2,3-trihydroxypropane-2,3-cyclic carbonate (VII), and 1-(4-ethoxy-3-methoxyphenyl)-1,2,3-trihydroxypropane-1,2-cyclic carbonate (VIII) were identified as degradation products by gas chromatography-mass spectrometry. These degradation products were qualitatively the same as those of substrate I in the laccase/HBT system, but the yield of the products was apparently different. The products catalyzed by the HRP/H₂O₂/HBT system contained large amounts of the aromatic ring cleavage products IV, VII, and VIII compared with those catalyzed by the laccase/HBT system, while the amount of Cα-Cβ cleavage product II is relatively low. These results suggest that the role of HBT is not in a simple one-electron transfer between the enzymes and substrates.     

Evaluation of fire-retardant properties of edge-jointed lumber from tropical fast-growing woods using cone calorimetry and a standard fire test

 Some tropical fast-growing woods were converted to edge-jointed lumber, and their fire-retardant properties due to chemical coating were evaluated using cone calorimetry and a standard fire test. The woods used were Indonesian and Malaysian albizia and gmelina plantation trees, with Japanese hinoki as a reference. The lumber was coated with 100 g/m² of trimethylol melamine phosphoric acid in a 25% aqueous solution. The treated and untreated lumber was tested in a laboratory-scale exposure furnace in accordance with JIS A 1304 and the cone calorimeter test with heat flux of 40 kW/m² following the ISO 5660. Results showed that fire endurance of all lumber was enhanced by the treatment. The fire-retardant properties were improved with increasing surface density. Though a similar trend was seen, the fire-retardant properties of the lumber revealed by the cone calorimeter test were inferior to those seen with standard fire test. Addition of thermocouples to the cone calorimeter allowed us to obtain information on the critical temperature (260°C) and charring temperature (300°C) of the lumber. Received: January 23, 2002 / Accepted: July 15, 2002 Acknowledgment The authors thank Dr. Shigehisa Ishihara, Professor Emeritus of the Wood Research Institute, Kyoto University for his suggestions about this experiment.     

Abrasive wear properties of compressed sugi wood

We examined the abrasive wear properties and the effect of abrasive grain size on the rate of wear when sugi wood (Cryptomeria japonica D.Don), compressed to various densities, was rubbed with abrasive paper. The results showed that the wear resistance of compressed wood increased linearly with the increased compression ratio; and under the condition of a low compression ratio it tended to be higher in comparison with the strength of compressed wood. The critical grain size effect, which can be witnessed during the abrasive wear of metals and plastics, was seen when low pressure was applied to the abrasive material. At higher pressures, the wear rate of the compressed wood increased with grain size, but the critical grain size effect was not observed. The pressure required to create the critical grain size effect was found to be higher than that needed for other types of uncompressed wood with the same yield properties.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

Nitrification Inhibitors from the root tissues of Brachiaria humidicola, a tropical grass

Nitrification inhibitory activity was found in root tissue extracts of Brachiaria humidicola, a tropical pasture grass. Two active inhibitory compounds were isolated by activity-guided fractionation, using recombinant Nitrosomonas europaea containing luxAB genes derived from the bioluminescent marine gram-negative bacterium Vibrio harveyi. The compounds were identified as methyl-p-coumarate and methyl ferulate, respectively. Their nitrification inhibitory properties were confirmed in chemically synthesized preparations of each. The IC50 values of chemically synthesized preparations were 19.5 and 4.4 microM, respectively. The ethyl, propyl, and butyl esters of p-coumaric and ferulic acids inhibited nitrification, whereas the free acid forms did not show inhibitory activity.     

Killing of feline T-lymphocytes by gamma-rays and energetic carbon ions

High linear energy transfer (LET) heavy charged particles have previously been applied clinically to human cancer radiotherapy because of their excellent physical properties of selective dose distribution and higher relative biological effectiveness (RBE) for human; however, such an approach has yet to be applied to cat patients. The present study investigates the biological effectiveness of low-LET gamma-rays (0.2 keV/micro m) compared to high-LET carbon ions (114 keV/micro m) in feline T- lymphocyte FeT-J cells. Clonogenic survival analysis revealed that the RBE value of carbon ions was 2.98 relative to a 10% survival dose (D(10)) by gamma-rays, and that the inactivation cross-section in cells exposed to gamma-rays and carbon ions was 0.023 and 38.9 micro m(2), respectively. Terminal deoxynucleotidyl transferase (TdT)-mediated dUTP-biotin nick end labeling (TUNEL) analysis revealed that TUNEL-positive frequency in carbon-irradiation cells is higher than for gamma-irradiated cells against exposure to the same physical doses, but that very little difference in TUNEL-positive frequency is observed between cells exposed to the respective D(10) dose of gamma-rays. Our data thus indicate that carbon ions are more effective for cell killing than gamma-rays at the same physical doses, but kill cells to an extent that is comparable to gamma-rays at the same biological doses. Carbon ion radiotherapy is therefore a promising modality for cat patients.     

Toll-like receptor 2 and 9 are expressed and functional in gut-associated lymphoid tissues of presuckling newborn swine

To clarify the crucial role of Toll-like receptor (TLR) 2 and TLR9 in immature gut-associated lymphoid tissues (GALT), we focused on the expression of TLR2 and TLR9 and the immune responses induced by their ligands in the GALT of presuckling newborn swine. Quantitative real-time PCR revealed that TLR2 and TLR9 mRNA were expressed at detectable levels in all tested tissues (heart, thymus, lung, spleen, liver, kidney, skeletal muscle, duodenum, jejunum, ileum, ileal Peyer patches (Pps), and mesenteric lymph nodes (MLN)). In particular, in immature intestinal tissues and GALT, TLR2 and TLR9 mRNA were expressed at higher levels in ileal Pps and MLN than in the duodenum, jejunum, and ileum. We confirmed that the TLR2 and TLR9 proteins were also highly expressed and that their ligands were preferentially recognized by TLR2- or TLR9-expressing cells in the MLN and ileal Pps. Zymosan, CpG2006, and lactic acid bacteria could promote mitogenesis and production of multiple cytokines by the MLN and ileal Pps. In addition, double immunostaining for cytokeratin 18 and either TLR2 or TLR9 revealed that both TLR2 and TLR9 are strongly expressed in the columnar membranous (M) cells. Interestingly, while the apical membrane of the columnar M cells strongly expressed TLR2 protein and preferentially recognized zymosan, both "TLR2 expression on the apical membrane" and "TLR2-mediated zymosan binding" were negligible in neighboring enterocytes. These results indicate that TLR2 and TLR9 allow MLN and ileal Pps to respond to a variety of bacterial components immediately after birth, thereby providing newborns with a host defense system.