Application of RVA and Time‐Lapse Photography to Explore Effects of Extent of Chlorination,Milling Extraction Rate,and Particle‐Size Reduction of Flour on Cake‐Baking Functionality

Three factors (extent of chlorination, milling extraction rate, and particle‐size reduction) in cake‐baking functionality of Croplan 594W flour were explored using a Rapid Visco‐Analyser (RVA) and time‐lapse photography. The extent of chlorination and milling extraction rate showed dramatic effects, but postmilling to reduce flour particle size was a less significant factor. RVA results showed that starch pasting was accelerated, and both peak and set‐back viscosities were enhanced, with increasing extent of chlorination. These effects were exaggerated by the high sugar concentration relevant to cake baking, compared to the same effects in water. Cake baking with chlorinated flours, in a formulation with 50% sugar (%S) and 275 parts total solvent (TS), showed that, as the extent of chlorination increased, cake moisture content and edge height decreased. Cake center height and shape factor were curvilinear, with maxima near flour with pH 4.6. Dramatic collapse occurred for cakes baked with unchlorinated flour samples, due to delayed starch pasting, as documented by time‐lapse photography and comparison to the geometry of the final cooled cakes. Starch pasting and egg white setting occurred too early for the cakes baked with excessively chlorinated flour (pH ≤4.0), but too late for the cakes baked with unchlorinated or insufficiently chlorinated flours (pH ≥4.9), compared to the ideal starch pasting and egg white setting behavior with appropriately chlorinated flours (pH >4.0 and <4.9). Informal sensory texture evaluation showed that cake mouthfeel was related to both moisture content per se and the relationship between moisture content and cake relative humidity (%RH). Excessive flour chlorination resulted in unacceptably dry cake mouthfeel.     

Genetic diversity of ICARDA’s worldwide barley landrace collection

Twenty genic- and genomic SSR markers were used to study genetic diversity and geographical differentiation of barley from 29 countries through analysis of a worldwide collection of 304 ICARDA’s barley landraces. Of these, 19 loci were highly polymorphic in the material studied. Based on Nei-distance matrix, Principal Component Analysis (PCoA) and cluster analysis using UPGMA associated with AMOVA the data revealed countries’ grouping within regions. Three distinct germplasm pools were identified in the landraces. The first of these was from Eastern Africa (Eritrea and Ethiopia) and South America (Ecuador, Peru and Chile) suggesting that barley introduced to South America might have originated specifically from East Africa or that they share a common genetic basis for adaptation. The second was the Caucasus (Armenia and Georgia) and the third included the remaining regions of Central Asia, Near East, Northern Africa and Eastern Asia. Genetic diversity of barley subspecies (Six-rowed barley, Two-rowed barley, H. spontaneum C. Koch and H. agriocrithon Åberg) also discriminates them into three groups: cultivated barleys (Six-rowed barley and Two-rowed barley), wild barley H. spontaneum and subspecies H. agriocrithon. These results associated with parsimony analysis demonstrate that H. agriocrithon and H. spontaneum might be distinct and do not support a hybrid origin for H. agriocrithon suggesting further investigation of the basis of more intense sampling of the two subspecies H. spontaneum and H. agriocrithon.     

Development of a Benchtop Baking Method for Chemically Leavened Crackers. I. Identification of a Diagnostic Formula and Procedure

A benchtop baking method has been developed to predict the contribution of gluten functionality to overall flour performance for chemically leavened crackers. To identify a diagnostic cracker formula, the effects of leavening system (sodium bicarbonate, monocalcium phosphate, and ammonium bicarbonate), sugar concentration (%S), and total solvent (TS) on cracker‐baking performance were explored. From preliminary experiments to establish a production procedure, 10 min of dough‐mixing time, a cord‐weave baking mesh, and a 500°F oven temperature were selected. For the leavening system, increasing ammonium bicarbonate (ABC) level at constant sodium bicarbonate (soda) and monocalcium phosphate (MCP) levels resulted in increased cracker height. For the diagnostic formula, 1.25 g of soda, 1.25 g of MCP, and 1.25 g of ABC were selected, based on 100 g of flour. As the sugar concentration in the cracker formula, at constant total solvent (38 TS), decreased to <20%, the resulting cracker dough became softer, and the baked cracker exhibited an increased blistering tendency because of a too‐high formula water level. In contrast, a cracker dough formulated with >40% sugar concentration was too crumbly to handle and sheet. As the total solvent in the cracker formula increased at constant sugar concentration (≈23.7%S), the resulting dough became softer. A dough with 34 TS was too crumbly to handle, while doughs with 42 and 46 TS were too soft to handle and resulted in blistering. Therefore, 38 TS and 23.7%S were identified for the diagnostic formula. Crackers baked with a hard wheat flour, a soft wheat flour, and blends validated the utility of the developed method.     

Slaughterfloor decontamination of pork carcases with hot water or acidified sodium chlorite - a comparison in two Australian abattoirs

A decontamination trial on the effectiveness of hot water or acidified sodium chlorite (SANOVA) treatment on Salmonella spp., Escherichia coli and Total Viable Count (TVC) was undertaken on pork carcases prior to primary chilling in two large pork abattoirs in Australia using belly-strip excision sampling. A total of 123 samples from Abattoir A and 400 samples from Abattoir B were cultured and analysed. Test pigs were selected from herds with a known high level of on-farm Salmonella infection. At Abattoir A, Salmonella spp. were not isolated from carcases. The prevalence of E. coli on control carcases was 92.9% compared with 9.8% for hot water and 12.5% for SANOVA treated carcases. The mean log(10) E. coli concentration for control carcases was 0.89 cfu/gram, compared with -0.83 cfu/gram from hot water and -0.75 cfu/gram from SANOVA treated carcases. The mean log(10) TVC for control carcases was 4.06 compared with 1.81 cfu/gram for hot water and 2.76 cfu/gram for SANOVA treated carcases. At Abattoir B, the prevalence of Salmonella on control carcases was 16% compared with 2.7% for hot water and 7.0% for SANOVA treated carcases. The prevalence of E. coli on control carcases was 69.3% compared with 22% for hot water and 30% for SANOVA treated carcases. The mean log(10) E. coli concentration for control carcases was 0.45 cfu/gram, compared with -0.65 cfu/gram from hot water and -0.60 cfu/gram from SANOVA treated carcases. The mean log(10) TVC for control carcases was 3.00 cfu/gram compared with 2.10 cfu/gram for hot water and 2.53 cfu/gram for SANOVA treated carcases. The reductions in prevalence and mean log(10) concentrations in the present trial were all found to be statistically significant and indicate that carcases decontamination with either hot water or SANOVA are effective risk management options immediately available to the pork industry.     

Traffic safety and urban living

Water, Air, & Soil Pollution - Traffic accidents are certainly not limited to urban life but the bulk of them occur in and around cities. Intersections are most hazardous for automobile...     

Large longitude libration of Mercury reveals a molten core

Observations of radar speckle patterns tied to the rotation of Mercury establish that the planet occupies a Cassini state with obliquity of 2.11 +/- 0.1 arc minutes. The measurements show that the planet exhibits librations in longitude that are forced at the 88-day orbital period, as predicted by theory. The large amplitude of the oscillations, 35.8 +/- 2 arc seconds, together with the Mariner 10 determination of the gravitational harmonic coefficient C22, indicates that the mantle of Mercury is decoupled from a core that is at least partially molten.     

Evidence for highly reflecting materials on the surface and subsurface of vensus

Radar images at a 12.5-centimeter wavelength made with the Goldstone radar interferometer in 1980 and 1986, together with lunar radar images and recent Venera 15 and 16 data, indicate that material on the surface and subsurface of Venus has a Fresnel reflectivity in excess of 50 percent. Such high reflectivities have been reported on the surface in mountainous regions. Material of high reflectivity may also underlie lower reflectivity surficial materials of the plains regions, where it has been excavated by impact cratering in some areas.