Effect of photoperiods before,during and after vernalization on flower initiation and development and its varietal difference in Japanese bunching onion (Allium fistulosum L.)

Summary

To control the bolting of Japanese bunching onion (Allium fistulosum L.) photoperiodically, the effect of photoperiods before, during and after vernalization on flower initiation and development and the varietal differences were investigated using the two mid-season flowering cvs Kincho and Asagi-kujo, and a late-season flowering cv. Cho-etsu. A long-day photoperiod (LD, 16 h) given before vernalization inhibited flower initiation. Especially, the bolting rate of ‘Asagi-kujo’ decreased by about a half, compared with the short-day photoperiod (SD, 8 h). The interaction between the effect of night temperature (3°C, 7°C, 11°C or 15°C) and the effect of the photoperiod (SD and LD) during vernalization was also investigated. In ‘Kincho’, LD did not affect flower initiation at 3°C, but inhibited flower initiation at 7°C, 11°C and 15°C. In ‘Asagi-kujo’, flower initiation was significantly inhibited by LD under all temperature conditions. This inhibitory effect was stronger at 11°C and 15°C than at 3°C and 7°C. In ‘Cho- etsu’, LD significantly inhibited flower initiation at 3°C and 7°C, and flower initiation rarely occurred at 11°C and 15°C. In this study, generally, LD during vernalization inhibited flower initiation in all cultivars. Thus Japanese bunching onion required a short-day photoperiod in flower initiation, which was stronger in ‘Asagi-kujo’ and ‘Cho-etsu’ than in ‘Kincho’. From these results, we conclude that low temperature and a short-day photoperiod complementarily induce flower initiation in Japanese bunching onion. Varietal differences exist in the requirement of low temperature and a short-day photoperiod: the primary requirement in ‘Kincho’ is low temperature and that in ‘Asagi-kujo’ is a short-day. After flower initiation, the early stage of flower development is day-neutral, and after the floret formation stage, a long-day photoperiod promotes flower development and elongation of the seedstalk.     

Effect of wood species on thermal flow behavior and physical properties of thermoplastic moldings

The thermoplastic flow behavior of cedar flour steamed at different temperatures in the range of 160–220°C was measured using a rheometer and compared with that of beech flour. The temperature at which the cedar flour starts to flow was approximately 70°C higher than that of beech flour, and the cedar flour exhibited low flowability. Furthermore, thermoplastic moldings were prepared from cedar and beech flours, and their physical properties were examined. Similar to the case of beech, a resin-like molding with a density of approximately 1.45?g/cm³ was obtained from the cedar flour steamed at 180°C or higher, and it was revealed by SEM observation that in these moldings wood flour particles adhere to each other. The specific bending strength was maximum for the moldings obtained from 180°C-steamed flour for both types of wood.     

A novel Rice QTL <Emphasis Type="Italic">qOPW11</Emphasis> Associated with Panicle Weight Affects Panicle and Plant Architecture

Background

The improvement of rice yield is a crucial global issue, but evaluating yield requires substantial efforts. Rice yield comprises the following indices: panicle number (PN), grain number per panicle (GN), 1000-grain weight, and percentage of ripened grain. To simplify measurements, we analyzed one panicle weight (OPW) as a simplified yield index that integrates GN, grain weight, and percentage of ripened grain, and verified its suitability as a proxy for GN and grain weight in particular.

Results

Quantitative trait locus (QTL) analysis using 190 recombinant inbred lines derived from Koshihikari (large panicle and small grain) and Yamadanishiki (small panicle and large grain), japonica cultivars detected three QTLs on chromosomes 5 (qOPW5), 7 (qOPW7) and 11 (qOPW11). Of these, qOPW5 and qOPW11 were detected over two years. qOPW5 and qOPW7 increased OPW, and qOPW11 decreased it at Yamadanishiki alleles. A chromosome segment substitution line (CSSL) with a genomic segment from Yamadanishiki substituted in the Koshihikari genetic background harboring qOPW5 increased grain weight. qOPW11 had the largest genetic effect of QTLs, which was validated using a CSSL. Substitution mapping using four CSSLs revealed that qOPW11 was located in the range of 1.46 Mb on chromosome 11. The CSSL harboring qOPW11 decreased primary and secondary branch numbers, culm length, and panicle length, and increased PN.

Conclusions

In this study, three QTLs associated with OPW were detected. The CSSL with the novel and largest QTL, qOPW11, differed in some traits associated with both panicle and plant architecture, indicating different functions for the meristem in the vegetative versus the reproductive stages. qOPW5 coincided with an identified QTL for grain width and grain weight, suggesting that qOPW5 was affected by rice grain size. OPW can be considered a useful trait for efficient detection of QTLs associated with rice yield.

     

Determining Young’s modulus of timber on the basis of a strength database and stress wave propagation velocity II: effect of the reference distribution database on the determination

A method of determining the Young’s modulus of timber using the stress wave propagation velocity without knowing the timber density was developed in our previous study. This method enables the estimation of Young’s modulus by Monte Carlo simulation using an existing database of the Young’s modulus versus density relationship as reference. Here, in Part II, we consider the effect of the reference distribution database on the accuracy of the estimated Young’s modulus by the developed method. Twelve different reference distribution databases were used in this study, containing Young’s modulus versus density data for more than 13 000 real-size timber specimens of ten different species. We obtained the following results: (1) the distribution of Young’s modulus estimated using an arbitrary stress wave propagation velocity depends on the reference distribution database employed, (2) the most important factor is not that the reference database has data on the same species as the timber in the test, but rather that the reference distribution database covers the foreseeable range of timber densities within the test, and (3) the estimation accuracy is higher than about 80% when the database covers many species and has wide ranges of densities and Young’s moduli. This estimation method was developed in order to measure the Young’s modulus of timber whose density cannot be measured. Considering that the quality of lumber has a large variation, such estimation accuracy will be useful for practical applications.     

Comparison of the glucosinolate-myrosinase systems among daikon (Raphanus sativus, Japanese white radish) varieties

Myrosinase is a cytosolic plant enzyme present in daikon ( Raphanus sativus, Japanese white radish) roots that hydrolyzes 4-methylthio-3-butenyl glucosinolate (MTBGLS) into the natural pungent agent 4-methylthio-3-butenyl isothiocyanate (MTBITC), which possesses antimicrobial, antimutagenic, and anticarcinogenic properties. The concentration of MTBGLS, myrosinase activity, and production of MTBITC in seven daikon varieties (one conventional and six heirlooms) were determined to rank the activity of the glucosinolate-myrosinase system and identify critical factors influencing the production of MTBITC. The six heirloom varieties produced 2.0-11.5 times higher levels of MTBITC as compared to the conventional variety, Aokubi, which is consumed by the present Japanese population. The myrosinase was located exclusively in the outer epidermal layer in Aokubi, and MTBGLS was widely distributed throughout the root tissue. Although the skin is a potentially rich source of myrosinase in Aokubi, the skin is usually peeled off in the current practice of preparing daikon for cooking. New practices are therefore proposed for the preparation of daikon tubers that eliminate the peeling of the skin to avoid removing the enzyme needed to convert MTBGLS to the health-beneficial MTBITC. It is also concluded that the consumption of heirloom daikon varieties in addition to changes in food preparation will optimize the health benefits of daikon.     

Systemic injection of FGF-2 stimulates endocortical bone modelling in SAMP6, a murine model of low turnover osteopenia.

The effects of systemically administered fibroblast growth factor-2 (FGF-2) at doses of 0.1 and 0.3 mg/kg/day for 7 days were investigated 5-week-old male SAMP6 mice, a model of low turnover osteopenia. The bone histomorphometry in the distal epiphyseal growth plate of the femur showed that 0.3 mg/kg/day of FGF-2 decreased the longitudinal growth rate and cartilage cell production rate and increased the growth plate width. Growth plate chondrocytes showed the features of defective endochondral ossification at the same dosage level. In the distal one third of the femur, the marrow trabecular area, endocortical mineral apposition rate and/or bone formation rate were increased in both the SAMP6 mice given 0.1 and 0.3 mg of FGF-2/kg/day. In this region, the endocortical osteoblasts were hypertrophied with some layers of overlying proliferated fibroblastic mesenchymal cells. The presence of small foci of bone formation within the layers of these mesenchymal cells indicates their osteogenic potential. On the other hand, the periosteal bone formation rate in the mid-shaft of the femur was depressed in the 0.3 mg/kg/day group. These results suggest that systemically administered FGF-2 may have the possibility to increase the peak bone mass in SAMP6 by stimulating the osteoprogenitor cells to proliferate and differentiate into osteoblasts and enhancing endocortical bone modelling. The higher dose of FGF-2, however, inhibited both endochondral and periosteal bone formation.     

Contrast-enhanced ultrasonography for characterization of focal splenic lesions in dogs

Background: Contrast‐enhanced ultrasonography with perflubutane microbubbles improves the diagnostic accuracy to differentiate benign and malignant focal liver lesions in dogs. Hypothesis: Perflubutane microbubbles‐enhanced ultrasonography is useful for differentiation of benign from malignant focal splenic lesions in dogs. Animals: Twenty‐nine clinical dogs with single or multiple focal splenic lesions detected by conventional ultrasonography. Methods: Prospective clinical observational study. Perflubutane microbubbles‐enhanced ultrasonography was performed in 29 dogs with focal splenic lesions. Qualitative assessment of the enhancement pattern was performed in the early vascular, late vascular, and parenchymal phases. Results: In the early vascular phase, a hypoechoic pattern was significantly associated with malignancy (P= .02) with sensitivity of 38% (95% confidence interval [CI], 25–38%) and specificity of 100% (95% CI, 84–100%). In the late vascular phase, a hypoechoic pattern was significantly associated with malignancy (P= .001) with sensitivity of 81% (95% CI, 66–90%) and specificity of 85% (95% CI, 65–95%). There was no significant difference between malignant and benign lesions during the parenchymal phase. Conclusions and Clinical Importance: Hypoechoic splenic nodules in the early and late vascular phases with perflubutane microbubbles‐enhanced ultrasonography are strongly suggestive of malignancy in dogs.