Effect of dystocia on subsequent reproductive performance and functional longevity in Holstein cows

The objective of this study was to evaluate the effect of dystocia on the reproductive performance and functional longevity in Iranian Holsteins. Data consisted of 1 467 064 lactation records of 581 421 Holstein cows from 3083 herds which were collected by the Animal Breeding Center of Iran from April 1987 to February 2014. Reproduction traits in this study included interval from first to second calving, days open and days from first calving to first service. The generalized linear model was used for the statistical analysis of reproductive traits. Survival analysis was performed using the Weibull proportional hazards models to analyse the impact of dystocia on functional longevity. The incidence of dystocia had an adverse effect on the reproductive performance of dairy cows. Therefore, reproductive traits deteriorated along with increase in dystocia score (p < 0.05). The culling risk was increased along with increase in the score of dystocia (p < 0.0001). The greatest culling risk was observed in primiparous cows, small herds and low‐yielding cows (p < 0.0001). Also, the lowest culling risk was found for cows calving at the youngest age (<27 months), and cows with age at first calving >33 months had the greatest risk (p < 0.0001). The results of current study indicated that dystocia had important negative effects on the reproductive performance and functional longevity in dairy cows, and it should be avoided as much as possible to provide a good perspective in the scope of economic and animal welfare issues in dairy herds.     

Land leveling and changes in soil properties in paddy fields of Guilan province,Iran

Paddy and Water Environment - The aim of this study was to evaluate the impacts of land leveling on some of soil properties. Land leveling as an effective strategy for paddy land management is one...     

The Impact of Development Plans on Hydrological Changes in the Shazand Watershed,Iran

Development plans are mainly responsible for population changes and the conversion of forest and rangelands into agricultural lands and human settlements. Qualitative and quantitative analysis of population and land use changes are necessary to assess the impacts of change on hydrological processes. However, such important issues have been less considered worldwide particularly in developing countries. Therefore, we selected the Shazand Watershed (1740 km²) because of rapid industrialization to track the effects of land use and population changes on streamflow and sediment yield. The data were collected from statistical yearbooks and satellite imageries from 1973 to 2008. All available measurements on discharge and suspended sediment concentration at the Pole doab hydrological station were also collected. The study was conducted for the whole period, as well as the pre‐1991 and post‐1991 as a basis for the economic development growth in the region. We found that the land use and population changes have occurred in the Shazand Watershed, especially in the vicinity of industrial zones. The results showed that the cities, industrial zones, roads, and bare lands quickly increased from 58 · 8 to 134 · 3 km² during post‐1991. The flow durations, sediment rating curves and trend analyses indicated distinct variations in the relationship between streamflow and sediment and also caused changes within different periods. Based on the results, the mean annual flow and sediment yield in post industrialization (1991–2008) were respectively 0 · 84 and 1 · 19 times of those for pre‐industrialization period and the annual sediment yield increased from 25,000 to 29,850 Mg. Copyright © 2016 John Wiley & Sons, Ltd.     

The application of polyamines by pressure or immersion as a tool to maintain functional properties in stored pomegranate arils

Pomegranate fruits were treated with putrescine (Put) or spermidine (Spd) at 1 mM either by pressure infiltration or by immersion and then were stored at 2 degrees C for 60 days. Samples were taken biweekly and were further stored 3 days at 20 degrees C for shelf life study. The treatments were effective on maintaining the concentration of ascorbic acid, total phenolic compounds, and total anthocyanins in arils at higher levels than in control samples. In addition, the two ways of polyamine application increased the levels of total antioxidant activity (TAA) during storage, especially when polyamines were applied by pressure infiltration. Moreover, Spd showed the best results on increasing TAA through maintenance of total phenolic compounds.     

Construction of a genetic linkage map with SSR,AFLP and morphological markers to locate QTLs controlling pathotype-specific powdery mildew resistance in diploid roses

Disease resistance is a sought-after trait in plant breeding programmes. One strategy to make resistance more durable is to increase the number of resistance genes, thereby increasing the number of pathotypes withstood. One of the most important diseases on roses is powdery mildew (PM) (Podosphaera pannosa). Recent studies show that pathotypes of PM and different types of resistances in roses exist. The results of this study aim to contribute to PM resistance in roses by the development of pathotype-specific markers on a genetic map. A diploid rose population (90 genotypes) derived from a cross between Rosa wichurana and Rosa ‘Yesterday’ was used to construct a genetic linkage map encompassing 20 AFLP primer combinations, 43 SSR, and 2 morphological markers. By applying the F1 pseudo test cross population strategy, two parental linkage maps were constructed (parent ‘Yesterday’ 536 cM; parent R. wichurana 526 cM). Both parental maps consisted of seven linkage groups with an average length of 70 cM (Kosambi) corresponding to the seven haploid rose chromosomes. These new maps were used to identify QTLs controlling disease resistance. The offspring population was screened for resistance to two PM pathotypes, R–E and R–P. QTLs for controlling pathotype-specific disease resistance were mapped by applying Kruskal–Wallis rank-sum tests and simple interval mapping. With two pathotypes analysed, nine QTL loci were detected on linkage groups 2, 3, 5 and 6, explaining 15–73% of the phenotypic variance for pathotype-specific disease response. The genetic maps developed here will be useful for future rose breeding, pathotype-specific resistance research and development of a consensus map for roses.     

Acute phase proteins in the diagnosis of bovine subclinical mastitis

Background: The California mastitis test (CMT) and somatic cell count (SCC) are commonly used for diagnosis of subclinical mastitis in cattle. Acute phase proteins (APPs), as alternative biomarkers of mastitis, may increase in concentration in the absence of macroscopic changes in the milk, or may precede the onset of clinical signs. Objective: The aim of this study was to compare the accuracy of APPs measured in milk and in serum with bacterial culture for the diagnosis of bovine subclinical mastitis. Methods: One hundred and seventy‐five Holstein cows were randomly selected from 7 dairy farms. Quarter milk and serum samples were taken from all cows. Milk samples were analyzed using a CMT and SCC, and for haptoglobin (MHp) and amyloid A (MAA) concentrations, and were also submitted for bacterial culture. Serum samples obtained concurrently were analyzed for haptoglobin (SHp) and amyloid A (SAA). Two‐sample Wilcoxon (Mann–Whitney) test was used to compare SCC, MAA, MHp, SAA, and SHp concentrations between culture‐positive and culture‐negative animals. Receiver‐operating characteristic analysis was used to assess the performance of each test using bacterial culture as the reference method. Results: MAA concentration was the most accurate of the 5 tests, with a sensitivity of 90.6% and specificity of 98.3% at concentrations >16.4 mg/L. MAA and MHp had significantly larger areas under the curve than the respective serum proteins, SAA and SHp. Conclusions: The results suggest that measuring haptoglobin and amyloid A in milk is more accurate than serum analysis for the diagnosis of subclinical mastitis in Holstein cows.     

Variation of tolerance to manganese toxicity in Australian hexaploid wheat

High concentrations of manganese (Mn), iron (Fe), and aluminium (Al) induced in waterlogged acid soils are a potential constraint for growing sensitive wheat cultivars in waterlogged‐prone areas of Western Australian wheat‐belt. Tackling induced ion toxicities by a genetic approach requires a good understanding of the existing variability in ion toxicity tolerance of the current wheat germplasm. A bioassay for tolerance to high concentration of Mn in wheat was developed using Norquay (Mn‐tolerant), Columbus (Mn‐intolerant), and Cascades (moderately tolerant) as control genotypes and a range of MnCl₂ concentrations (2, 250, 500, 750, 1000, 2000, and 3000 μM Mn) at pH 4.8 in a nutrient solution. Increasing solution Mn concentration decreased shoot and root dry weight and intensified the development of toxicity symptoms more in the Mn‐intolerant cv. Columbus than in Norquay and Cascades. The genotypic discrimination based on relative shoot (54% to 79%) and root dry weight (17% to 76%), the development of toxicity symptoms (scores 2 to 4) and the shoot Mn concentration (1428 to 2960 mg kg^–1) was most pronounced at 750 μM Mn. Using this concentration to screen 60 Australian and 6 wheat genotypes from other sources, a wide variation in relative root dry weight (11% to 95%), relative shoot dry weight (31% to 91%), toxicity symptoms (1.5 to 4.5), and shoot Mn concentration (901 to 2695 mg kg^–1) were observed. Evidence suggests that Mn tolerance has been introduced into Australian wheat through CIMMYT germplasm having “LERMO‐ROJO” within their parentage, preserved either through a co‐tolerance to Mn deficiency or a process of passive selection for Mn tolerance. Cultivars Westonia and Krichauff expressed a high level of tolerance to both Mn toxicity and deficiency, whereas Trident and Janz (reputed to be tolerant to Mn deficiency) were intolerant to Mn toxicity, suggesting that tolerance to excess and shortage of Mn are different, but not mutually exclusive traits. The co‐tolerance for Mn and Al in ET8 (an Al‐tolerant near‐isogenic line) and the absence of Mn tolerance in BH1146 (an Al‐tolerant genotype from Brazil) limits the effectiveness of these indicator genotypes to environments where only one constraint is induced. Wide variation of Mn tolerance in Australian wheat cultivars will enable breeding genotypes for the genetic solution to the Mn toxicity problem.     

Aluminum,manganese, and iron tolerance improves performance of wheat genotypes in waterlogged acidic soils

Waterlogging results in high shoot concentrations of iron (Fe), aluminum (Al), and manganese (Mn) in wheat grown in acidic soil. The verification of this observation in several acidic soils, development of screening techniques, and identification of genotypes differing in tolerance made it possible to test whether tolerance of ion toxicities improves performance of wheat in waterlogged acid soils. Six wheat varieties selected for tolerance/intolerance of Al, Mn, and Fe were grown in three acidic soils (pH_CaCl2 4.1–4.3) with or without waterlogging for 40 d. In terms of relative shoot dry weight, Al‐, Mn‐, and Fe‐tolerant genotypes tolerated waterlogging better, outperforming intolerant genotypes by 35%, 53%, and 32%, respectively, across the soils. The Al‐tolerant genotype had up to 1.8‐fold better root growth than the intolerant genotype under waterlogging. Waterlogging increased DTPA‐extractable soil Mn (71%) and Fe (89%), and increased shoot Fe (up to 7.6‐fold) and Al (up to 5.9‐fold) for different genotypes and soils. The Al‐tolerant genotype maintained lower tissue concentrations of Al as compared to intolerant genotypes during waterlogging. Waterlogging delayed crop development but distinctly less so in the tolerant than in the intolerant genotypes, thus jeopardizing the capacity of intolerant genotypes to produce yield in Mediterranean climates with dry finish of the season. Pyramiding multiple ion tolerances into current wheat varieties with desirable agronomic and quality characteristics to enhance their performance under waterlogged acid soils should be considered.