Specific dynamic action in two body size groups of the southern catfish (<Emphasis Type="Italic">Silurus meridionalis</Emphasis>) fed diets differing in carbohydrate and lipid contents

Specific dynamic action (SDA), the energy costs associated with meal digestion and assimilation, is generally affected by body size and food composition. We assessed the postprandial metabolic response and calculated SDA in two size groups of the southern catfish (Silurus meridionalis), each fed one of two diets, high lipid or high carbohydrate, at a meal size of 4% the body mass. Using a continuous-flow respirometer, we determined the oxygen consumption rate at 2-h intervals until the postprandial oxygen consumption rate returned to the prefeeding level. None of the parameters (resting metabolic rate, Rpeak, factorial ratio, time-to-peak, duration, energy expended on SDA, or SDA coefficient) were significantly affected by diet nor was there an interaction between diet and body mass. Rpeak and energy expended on SDA for the whole fish body were significantly higher in the larger fish than the smaller one in both dietary treatments, whereas no significant effect of body size was found in mass specific values. Factorial ratio (range 3.41 to 3.60), peak time (range 9.6 to 12.7 h), SDA coefficient (range 9.36 to 10.36%), and SDA duration (range 62.0 to 71.0 h) did not significantly differ between body size groups. These results suggest that in S. meridionalis the percentage of assimilated energy allocated to SDA may be independent of the body mass.     

Evaluation of three phytoplankton species as food for the pearl oyster <Emphasis Type="Italic">Pinctada fucata</Emphasis>

In the pearl cultivation farms of the Ehime Prefecture, Japan, mass mortalities of the pearl oyster Pinctada fucata have occurred since 1994. The occurrences of mass mortality roughly coincided with a shift of the dominant phytoplankton from Skeletonema and Chaetoceros to Chaetoceros and Nitzschia all of which belong to Bacillariophyceae. Hence, we evaluated Nitzschia, together with Chaetoceros and Isocrysis, as food for the oyster. Wet weights, lengths, widths, glycogen contents, and growth rates in terms of wet weight of the oysters in all the feeding treatments were significantly higher than those in the non-feeding treatment. The highest glycogen content (2.34%) and growth rate (2.21 g month⁻¹) were found in the Chaetoceros treatment. Growth rate in the Isocrysis treatment (1.63 g month⁻¹) was also high, although glycogen content in this treatment (0.41%) was low. In the Nitzschia treatment, growth rate of the oyster (0.94 g month⁻¹) was the lowest and glycogen content (0.83%) was also low relative to that in the Chaetoceros treatment. Chlorophyll a concentration in fecal pellets was lowest in the Nitzschia treatment (<2.7 μg mg⁻¹), suggesting more complete digestion of Nitzschia by the oyster. Thus, Nitzschia was edible and digestible but not assimilated by P. fucata. We propose the following scenario for the relationship between Nitzschia dominance and mass mortality. When Nitzschia dominates in a culture area, the physiological condition of P. fucata deteriorates due to low assimilation of Nitzschia by the oyster, followed by susceptibility of the oyster to infection by agents lethal to the oyster.     

The harvest of the freshwater crayfish <Emphasis Type="Italic">Astacus leptodactylus</Emphasis> Eschscholtz in Turkey: harvest history,impact of crayfish plague,and present distribution of harvested populations

This review focuses on the present distribution of populations of the crayfish Astacus leptodactylus that are harvested in Turkey. It also examines the history of this harvest and the impact that crayfish plague has had on them. Crayfish plague, caused by the fungus-like organism, Aphanomyces astaci Schikora, 1906, is a severe parasite of freshwater crayfish and has caused a lot of damage to A. leptodactylus populations in Turkey since 1984. Turkey was the largest provider of A. leptodactylus to Western Europe from 1970 (or possibly earlier) until 1986. For example, the peak production was reached in the early 1980s, with over 5,000 tonnes being exported in 1984. On the other hand, as a result of the crayfish plague the harvest of A. leptodactylus was reduced severely in most populations in Turkey after 1985. The harvest was only 320 tonnes in 1991. After the occurrence of crayfish plague in Turkey, in order to increase crayfish production uncontrolled A. leptodactylus stockings have been carried out in many waterbodies throughout Turkey. These introductions have caused an increase in the number of A. leptodactylus populations, but exploitation of A. leptodactylus is still under the pressure of the plague, although there has been a steady increase in crayfish production in recent years. The harvest increased to 2,317 tonnes in 2004. Fortunately, among those populations affected by crayfish plague, large amounts of A. leptodactylus can still be harvested from three lakes, ?znik (Bursa), E?irdir (Isparta) and Çivril (Denizli). Thus, it seems that A. leptodactylus has a degree of resistance to crayfish plague. It is therefore interesting to investigate the resistance of A. leptodactylus caught from these populations to crayfish plague.     

Transpositional feeding rhythm of loach <Emphasis Type="Italic">Misgurnus anguillicaudatus</Emphasis> from larvae to juveniles and its ontogenesis under artificial rearing conditions

The diel feeding rhythm and ontogenesis during early life stage of loach Misgurnus anguillicaudatus were investigated under experimental conditions (light: L 06:00–18:00, D 18:00–06:00 h). Morphological and behavioral developments of loach from newly hatched to 40 days after hatching were observed. Larvae were able to prey on daphnia 3–4 days after hatching at 23 ± 0.5°C. As the larvae grew, they showed an increasing feeding capacity and a distinct feeding rhythm. Feeding intensity and incidence for day-4 larvae were highest at 10:00 and 16:00 h. The highest levels of feeding intensity for day-12 larvae occurred at 08:00, 12:00, and 18:00 h as did feeding incidence. By day 20, when the larvae metamorphosed, the highest levels of feeding intensity occurred at 06:00, 18:00, and 24:00 h and were concurrent with the highest feeding incidence. After metamorphosis, feeding capacity had again increased considerably and, in contrast to the earlier stages before day 20, feeding intensity for day-30 juveniles peaked at 05:00 and 20:00 h, about 1–2 h after the maximum feeding incidence. The feeding rhythm of loach juveniles at day 40 was almost the same as the day-30 juveniles. The estimated maximum daily feeding rates were 43.1%, 33.4%, 19.0%, 12.8%, and 5.8% of body weight on days 4, 12, 20, 30, and 40, respectively. Thus, loach was found to have different feeding rhythms in the pre- and post-metamorphosis stages, with the highest feeding activity in daytime during the larval planktonic stage before metamorphosis, and intensely nocturnal feeding behavior during the juvenile benthic stage after metamorphosis.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

Effects of date palm leaf fiber on the thermal and tensile properties of recycled ternary polyolefin blend composites

This work investigated the effects of date palm leaf fiber (DPLF) content on the thermal and tensile properties; and morphology of compatibilized polyolefin ternary blend. Recycled polyolefin ternary blend consisting of low density polyethylene (RLDPE), high density polyethylene (RHDPE) and polypropylene (RPP) were fabricated at different parts per hundred resin (phr) of DPLF. Maleic anhydride grafted polyethylene (MAPE) was used as compatibilizer to enhance the adhesion between filler and polymer matrix. The composites were prepared using melt extrusion and tests samples were produced via injection molding process. Thermal conductivity results showed that as much as 11 % reduction in thermal conductivity was achieved with the incorporation of 30 phr DPLF. Highest tensile strength was observed with the incorporation of 10 phr DPLF. The elongation at break was reduced with the addition of DPLF due to impediment of chain mobility by the fillers. Initial degradation temperature increased with the addition of DPLF. Hence, it is concluded that DPLF can be used to develop green and thermally insulating composites. It is hoped that the present results will stimulate further studies on the thermally insulative materials based on natural fibers reinforced polymer composites for applications in the building industries.     

Characterization of the surface properties of cellulosic fibers in fibrous and ground forms by IGC and contact angle measurements

Surface properties of fibrous and ground cotton and linen were investigated by inverse gas chromatography (IGC) and the contact angle with different liquids was also measured on fabrics composed of both fibers. Results proved that dispersion component of surface tension (γ _s ^d ) determined by IGC depends not only on the surface energy, but also on several factors influencing the adsorbability of probe molecules on the cellulosic substrates. For cotton samples, the trapping of n-alkanes among waxy molecules in the outer layer of fibers can be presumed. This effect results in larger γ _s ^d for cotton fibers than for linen in spite of the higher wettability of the linen fabrics. Besides the surface energy and trapping effects, the grinding also influences the γ _s ^d values. Specific enthalpy of adsorption (ΔH _A ^ab ) of polar probes could be determined on all linen samples, but only on the ground cotton sample. Lewis acid-base character calculated for linen and ground cotton samples depends on the same effects as the γ _s ^d does. The similar ΔH _A ^ab values of chloroform (acidic) and THF (basic) measured on each of the samples support the conclusion that the surface character is amphoteric, which is also proved by the high ΔH _A ^ab values of the amphoteric ethyl acetate and acetone probes.     

An investigation on the comparison of wet spinning and electrospinning: Experimentation and simulation

Polysulfonamide (PSA) has been widely used in many fields because of its excellent thermodynamic properties. In this study, PSA fibers were prepared separately via two different spinning ways, including conventional wet spinning and electrospinning. Fluid motion of wet spinning and electrostatic field of electrospinning were modeled using finite element analysis to investigate the spinning process. The properties of fabricated PSA fibers were characterized systematically by scanning electron microscope (SEM), fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), thermal gravity analysis (TGA) and electronic strength tester. Based on the simulation and theoretical analysis of spinning process, it was found that the extruding force of the wet spinning is larger than that of the electrospinning. The larger extruding force makes the alignment of macromolecules inside fiber relatively uniform, and a higher proportion of crystallization happens. Accordingly, the mechanical properties and thermal stability of PSA fibers could be improved due to a higher proportion of crystallization. The experimental results of mechanical strength and TG test are coincided with the simulation results. PSA fiber prepared by wet spinning has better thermal stability and mechanical properties than that fabricated by electrospinning.     

Preparation of PHEMA/nHAP nanocomposites via <Emphasis Type="Italic">in situ</Emphasis> polymerization in supercritical carbon dioxide for biomedical applications

Poly(2-hydroxyethylmethacrylate) (PHEMA)/hydroxyapatite (HAP) nanocomposites were synthesized through a new route involving nano-sized HAP (nHAP) particles or modified nHAP mixed with monomer 2-hydroxyethylmethacrylate via in situ polymerization in supercritical carbon dioxide (scCO₂). Fourier-transform infrared spectroscopy showed phosphate peak increased with nHAP content in composite. X-ray diffraction patterns of PHEMA/nHAP revealed the presence of crystallized nHAP. Thermogravimetric analysis showed that the ultimate nHAP content in PHEMA/nHAP composites is consistent with its initial amount. Scanning electron microscopy revealed that nanocomposite particles are much smaller than PHEMA particles. PHEMA/nHAP composites with average diameter of approximately 600 nm were obtained in scCO₂ with 94 % yield. Mechanical properties of PHEMA/nHAP nanocomposites were better than those of PHEMA, and compressive modulus and strength of composites with 30 wt.% nHAP were 193 and 29 MPa, respectively. Nanocomposite adsorption toward bovine serum albumin was evaluated, and results indicated that analyte adsorption amount can reach up to 282 mg/g.     

Synthesis and characterization of a novel charring agent and its application in intumescent flame retardant polyethylene system

A novel charring agent poly(pentaerythritol spirocyclic phosphorusoxy spirocyclic diethanolamine borate) (PPSPSDB) was synthesized successfully with diethanolamine borate (DEAB) and spirocyclic pentaerythritol bisphosphorate disphosphoryl chloride (SPDPC), which was combined with ammonium polyphosphate (APP) to endow linear low-density polyethylene (LLDPE) with flame retardance. The structure of PPSPSDB was characterized by FTIR and 1H-NMR. The study of thermal stability of various LLDPE composites showed that PPSPSDB/APP system could effectively improve the thermal degradation and thermal-oxidative stability of the char residues, and PE3 containing 30 wt% APP/ PPSPSDB with a 2 weight ratio left the highest amount of char residue at 800 oC. The results of flammability revealed that PE3 had the best combination property; the limited oxygen index value was 29.6, and vertical burning reached UL-94 V-0 rating, and the tensile strength and notched impact strength were 11.853 MPa and 28.8 kJ/m2 respectively. The investigation of structure and morphology of char residue indicated that the compact foaming char layer, as a good barrier against the transmission of heat and volatiles, was formed for PE3 during combustion.