Pressure-induced solid carbonates from molecular CO2 by computer simulation

A combination of ab initio molecular dynamic simulations and fully relaxed total energy calculations is used to predict that molecular CO2 should transform to nonmolecular carbonate phases based on CO4 tetrahedra at pressures in the range of 35 to 60 gigapascals. The simulation suggests a variety of competing phases, with a more facile transformation of the molecular phase at high temperatures. Thermodynamically, the most stable carbonate phase at high pressure is predicted to be isostructural to SiO2 alpha-quartz (low quartz). A class of carbonates, involving special arrangements of CO4 tetrahedra, is found to be more stable than all the other silica-like polymorphs.     

Energy balance for ethyl alcohol production from crops

Energy requirements to produce ethyl alcohol from three different crops in Brazil (sugarcane, cassava, and sweet sorghum) were calculated. Figures are presented for the agricultural and industrial phases. The industrial phase is always more energy-intensive, consuming from 60 to 75 percent of the total energy. Sugarcane is the more efficient crop for ethyl alcohol production, followed by sweet sorghum and cassava from a net energy viewpoint. The utilization of sweet sorghum stems might increase the total energy gain from this crop to almost the same level as sugarcane. Cassava has a lower energy gain at the present state of agriculture in Brazil.     

Probability of pregnancy to artificial insemination either after detected oestrus or at a fixed time in dairy cows: Influence of intrinsic and extrinsic factors in a large-scale,on-farm study

The first aim of this study was to determine the influence of the procedures [hormonal treatments for fixed time artificial insemination (FTAI) versus insemination at spontaneous oestrus (SEAI)] on several sequential inseminations (AI). A second aim was to determine the influence of some intrinsic and extrinsic factors and their interactions, including characteristics of the animals such as age, season, farm, sire, and AI technician on the response to both procedures. A retrospective analysis was performed from a data base of 120.807 AIs of healthy cows with at least 40–70 days post-partum at first service. Overall, FTAI achieved slighter greater pregnancy rates than insemination after detected oestrus. The second AI seems to be a key insemination as effects of sire and technician were greater than in the following ones. The use of FTAI or SEAI in one AI did not affect the results of the following AIs, regardless if FTAI or SEAI procedures were used in that AI. Technician had greater variation than sire or farm on final pregnancy rate. The results of each sire for pregnancy rate varied according to the type of insemination, with sires achieving greater results with one or other procedure. Pregnancy rate was positively related to the days in milk in the first two AIs. Results were greater in autumn than in spring services.     

Stable isotope characterization of the ortho-oxygenated phenylpropanoids: coumarin and melilotol

The natural abundance 2H NMR spectra of extractive coumarin 10 and of its dihydroderivative melilotol 11 produced by baker's yeast reduction has been compared with synthetic materials. Diagnostic for the differentiation of 10 are the (D/H)beta values, which are in the 128.1-133.6 ppm interval for the natural compounds but 258.5 and 189.8 ppm for the synthetic materials. Such a dramatic difference is also found for methyl cinnamate 12, which shows (D/H)beta values of 127.2 and 515.8 ppm, respectively. In extractive 10, the ratio (D/H)4para/(D/H)6ortho = 1.24 is similar to that observed in structurally related salicin and methyl salicylate. Coumarin 10 is transformed in salicyl alcohol 9, providing diacetate 14, showing in the natural series the trend (D/H)3meta > (D/H)4para > (D/H)5meta approximately (D/H)6ortho. A similar trend is shown also by the synthetic 10. A clear distinction between extractive and synthetic 10 is obtained through delta18O determinations on 10 and on chroman 13. The bulk delta18O values in the extractive series of 10 are 20.3, 23.6, and 22.6 per thousand, while those of the aromatic oxygen are 2.3, 0.5, and -0.5 per thousand. In the synthetic sample, the values are 12.6 and 5.6 per thousand, respectively. As a final product, the reduction of 10 leads to the dihydroderivative 11. Both the baker's yeast reduction and the catalytic hydrogenation lead to a marked decrease of the deuterium content of 11, which is stronger for the beta-position than for the alpha-position.     

Stable isotope labeling pattern of resveratrol and related natural stilbenes

The stable isotope characterization of resveratrol 1 from Polygonum cuspidatum and of related natural stilbenes 11 and 12 obtained by hydrolysis of the corresponding glucosides 2 and 3 from Rheum is reported. The C(6)-C(2)-C(6) framework of suitably protected derivatives of 1, 2, and 3 has been degraded with ozone to the C(6)-C(1) aldehydes 4, 5, 9, and 10, retaining all hydrogen atoms of the precursors. The natural and synthetic derivatives are characterized and distinguished by natural abundance deuterium nuclear magnetic resonance studies. In the case of anisaldehyde 4 the two series show, as expected, the characteristic difference of the aromatic labeling. The formyl deuterium contents of 4 and 5 from resveratrol are remarkably different, seemingly reflecting the different enrichments existing between positions 3 and 2, respectively, of the phenylpropanoid precursor. The positional delta(18)O values of the extractive materials 1-3 were also determined. In this instance a selective deoxygenation procedure was adopted, leading from 1 to the products 6, 7, and 8. The delta(18)O values of the latter compounds reveal, respectively, those at position 4' and positions 3 and 5 of 1. Similarly, the phenolic products 11 and 12 were converted into 13 and 14. From the delta(18)O values of the single components it is possible to design a detailed map of the oxygen fractionations which characterizes the stilbenes 1-3. In particular, the oxygen present at position 4' of the phenylpropanoid moiety of 1-3 shows delta(18)O values of +11.5, +1.8, and +6.7 per thousand, respectively. Moreover, the phenolic oxygen atom at position 3' of rhapontin 3 shows a value of +11.7 per thousand. The data are compared with those previously obtained on structurally related compounds. These results show the utility of simple chemical degradations in the stable isotope characterization of structurally complex food components.     

Multielemental speciation analysis of fungi porcini (Boletus edulis) mushroom by size exclusion liquid chromatography with sequential on-line UV-ICP-MS detection

An analytical methodology to determine the molecular weight (MW) distribution patterns of several elements among different compounds present in commonly consumed edible mushrooms is presented in this work. A hyphenated technique based on size exclusion liquid chromatography (SEC) coupled on-line to UV and inductively coupled plasma mass spectrometry (ICP-MS) detection was used. The association of the elements to high and low MW fractions was confirmed with sequential detection by UV and ICP-MS. Separation of the fractions was performed by injecting a 100 microL sample volume to a Superdex 75 column. The effect of different mobile phases on the separation was evaluated. Additionally, three different extraction conditions including 0.05 mol L(-1) NaOH, 0.05 mol L(-1) HCl, and hot water at 60 degrees C were applied to extract the elemental species from the mushroom samples. Significant differences were observed in the chromatograms depending on the extraction conditions utilized. Optimization of the experimental variables involved in the SEC-UV-ICP-MS coupling was carried out. The method was applied to investigate the fractionation patterns of Bi, Co, Cu, Fe, I, Mo, Ni, Se, and Zn in fungi porcini (Boletus edulis) mushroom. The results obtained in this work indicate an important association of most of the elements to high MW fractions.     

Anti-Mullerian hormone and its relationship to ovulation response and fertility in timed AI Bos indicus heifers

This study evaluated the association between plasma anti-Mullerian hormone (AMH) concentration and fertility in Nelore (Bos indicus) heifers submitted to timed artificial insemination (TAI). At the onset of the synchronization protocol, heifers (n = 289) received a subcutaneous P4 ear implant (3 mg) and 2 mg of oestradiol benzoate. Eight days later, the P4 implant was removed and 0.5 mg of oestradiol cypionate, prostaglandin (0.265 mg, i.m.) and equine chorionic gonadotropin (300 UI, i.m.) was administered, and TAI was performed 48 hr after ear implant removal. Ovarian ultrasound evaluations were performed to measure number of ovarian follicles, dominant follicle size and ovulation response. Pregnancy diagnosis was performed by ultrasound 30 days after AI. Heifers with greater circulating AMH had more antral follicles, a smaller dominant follicle near timed ovulation and lower ovulation response to the timed AI protocol compared to heifers with lower circulating AMH. Although AMH and pregnancy outcome had a quadratic-shaped pattern, AMH was not significantly associated with fertility. In conclusion, heifers with lower AMH had larger follicles towards the end of the synchronization protocol and greater ovulation responses, whereas greater circulating AMH was unrelated to conception success.     

Low genetic variation and isolation of northern peripheral populations of a red seaweed (Grateloupia lanceola)

相似文献   

Effect of moisture on physical parameters of timber from Turkey oak (<Emphasis Type="Italic">Quercus cerris</Emphasis> L.) coppice in Central Italy

This study aims to investigate wood density at different levels of moisture, basic density and shrinkage of timber from Turkey oak (Quercus cerris L.) coppice forests growing in Central Italy. We also studied the variability in density in the trees within and among sites. Density shows no significant statistical differences in the tested population. A higher variability in the shrinkage than in the density was found. Wood moisture is referred to as dry mass and fresh mass, which is related to many performance characteristics of wood, i.e., energy production. Trends in moisture and water content were studied because these physical parameters play an important role in the specific area of firewood which requires an accurate estimation of mass, volume and energy content. This work is a contribution to improve xylo-energy estimates of small and medium forestry issues.     

Influence of phosphorus and calcium on flame atomic absorption spectrophotometric determination of lead in canned fish products

Lead was determined in the presence of whole multiples of the P/Ca ratio found in Portuguese canned fish by flame atomic absorption spectrophotometry with and without using an ashing aid. Under our experimental conditions, use of the ashing aid eliminates P and Ca interference. Results with real samples, spiked with 1, 2, 3, and 4 ppm lead, are presented and statistically treated.