FEM analysis of subsoil reaction on heavy wheel loads with emphasis on soil preconsolidation stress and cohesion

Heavy sugarbeet harvesters may compact subsoil. But it is very difficult to study this by field experiments that resemble agricultural practice. Therefore, an analysis was made by a finite element method (FEM) for a relevant calcaric fluvial soil profile, the mechanical properties of which were largely known. Measuring data of this Lobith loam soil includes preconsolidation stress, compression index and swelling index, all as a function of depth. Using these three types of soil parameters calculations have been done for tyre sizes, inflation pressures and wheel loads that occur with heaviest sugarbeet harvesters available on the European market in 1999. Because no values on soil cohesion were available, the calculations were done for several cohesion levels. The results include the detection of regions with Mohr–Coulomb plasticity and regions with cap plasticity (compaction hardening). For the soil studied—a typical soil strength profile for arable land with ploughpan in the Netherlands in the autumn of 1977—all studied combinations of wheel load and inflation pressure did not induce compaction in and below the ploughpan. The size of the region with Mohr–Coulomb plasticity decreased with increasing cohesion. It appeared from a sensitivity analysis that, although soil modelling may use a great number of soil parameters, the most important parameters seem to be: preconsolidation stress and cohesion. There is an urgent need for data of these parameters that are measured on a great range of subsoils and subsoil conditions.     

Influence of pH and ionic strength on heat-induced formation and rheological properties of soy protein gels in relation to denaturation and their protein compositions

The influence of pH and ionic strength on gel formation and gel properties of soy protein isolate (SPI) in relation to denaturation and protein aggregation/precipitation was studied. Denaturation proved to be a prerequisite for gel formation under all conditions of pH and ionic strength studied. Gels exhibited a low stiffness at pH >6 and a high stiffness at pH <6. This might be caused by variations in the association/dissociation behavior of the soy proteins on heating as a function of pH, as indicated by the different protein compositions of the dissolved protein after heating. At pH 3-5 all protein seems to participate in the network, whereas at pH >5 less protein and especially fewer acidic polypeptides take part in the network, coinciding with less stiff gels. At pH 7.6, extensive rearrangements in the network structure took place during prolonged heating, whereas at pH 3.8 rearrangements did not occur.     

Formation and stability of foam made with various potato protein preparations

In the present study, foam-forming and -stabilizing properties of potato proteins were studied using whipping and sparging tests. The soluble potato proteins are mainly composed of patatin and protease inhibitors. The whipping tests showed that less foam was formed from untreated patatin than from the protease inhibitors, but patatin foam was much more stable. The foam-forming properties of patatin could be strongly improved by partial unfolding of the protein. Whipping tests, at both low (0.5 mg/mL) and high (10 mg/mL) protein concentration, also indicated that foams made with an ethanol-precipitated protein isolate were more stable than those made with beta-casein and beta-lactoglobulin. More generally, it can be concluded that when proteins are used as a foaming agent, a high concentration is required, because the protein available is inefficiently used. Also, there are several variables that may all, in different ways, affect both foam formation (amount of foam, bubbles size distribution) and foam stability. These variables include the type and concentration of protein, solvent conditions (pH, I), and the method used to make the foam.     

Upgrading of maatjes herring byproducts: production of crude fish oil

Fish oil has been extracted from byproducts of the maatjes (salted) herring production using a pilot plant consisting of a mincer, heat exchanger, and three-phase decanter. The crude herring oil obtained had an initial peroxide value (PV), anisidine value (AV) and free fatty acids (FFA) level of only 3 mequiv of peroxide/kg of lipid, 8.9, and 2.9%, respectively. 5,8,11,14,17-Eicosapentaenoic acid (EPA) and 4,7,10,13,16,19-docosahexaenoic acid (DHA) were present in considerable amounts (99 and 91 g/kg, respectively). During storage of the oil, no photooxidation could be detected. Storage at room temperature led to significant autoxidation over time, apparent from primary and tertiary oxidation products, measured by a decrease of hydroperoxides and an increase of fluorescent compounds (FC). Storage at 50 degrees C resulted in significant increases in secondary (AV) and tertiary oxidation (FC) products. At all storage conditions, the FFA contents remained low (<3%) and the alpha-tocopherol content remained constant. These results open the possibility for fish oil production of good quality using salted herring byproducts.     

Effect of roasting conditions on reduction of ochratoxin a in coffee

A commercial lot of green coffee, naturally contaminated with ochratoxin A (OTA), was roasted under various conditions, and the effects on its final OTA content were determined. Precautions were taken in sampling the coffee to cope with OTA inhomogeneity. The roasting conditions were kept within the range of commercial practice. Roasting time was varied from 2.5 to 10 min, and the roast color varied from light medium to dark. The differences in OTA reduction between the different levels of roasting times and colors did not reach statistical significance. However, for all roasting conditions, the reduction was highly significant, 69% reduction over the combined results. In total, nine studies by various authors about OTA reduction during coffee roasting are now available. Seven out of these nine reported that the relevant range of OTA reductions was between 69 and 96%. Among these seven,are all four studies that reported using naturally contaminated beans, a sampling procedure adapted to mycotoxin inhomogeneity, and roasting conditions within the range of actual practice. Three different explanations are available for this reduction: physical removal of OTA with chaff, isomerization at the C-3 position into another diastereomer, and thermal degradation with possible involvement of moisture. All three explanations may play a partial role in the OTA reduction during coffee roasting.     

Improved detection of Mycobacterium tuberculosis and M. bovis in African wildlife samples using cationic peptide decontamination and mycobacterial culture supplementation

In South Africa, mycobacterial culture is regarded as the gold standard for the detection of Mycobacterium tuberculosis complex (MTBC) infection in wildlife even though it is regarded as “imperfect.” We compared a novel decontamination and mycobacterial culture technique (TiKa) to the conventional mycobacterium growth indicator tube (MGIT) system using known amounts of bacilli and clinical samples from MTBC-infected African buffaloes (Syncerus caffer), white rhinoceros (Ceratotherium simum), and African elephants (Loxodonta africana). Use of the TiKa-KiC decontamination agent on samples spiked with 10,000 to 10 colony forming units (cfu) of M. bovis (SB0121) and M. tuberculosis (H37Rv) had no effect on isolate recovery in culture. In contrast, decontamination with MGIT MycoPrep resulted in no growth of M. bovis samples at concentrations < 1,000 cfu and M. tuberculosis samples < 100 cfu. Subsequently, we used the TiKa system with stored clinical samples (various lymphatic tissues) collected from wildlife and paucibacillary bronchoalveolar lavage fluid, trunk washes, and endotracheal tube washes from 3 species with known MTBC infections. Overall, MTBC recovery by culture was improved significantly (p < 0.01) by using TiKa compared to conventional MGIT, with 54 of 57 positive specimens versus 25 of 57 positive specimens, respectively. The TiKa mycobacterial growth system appears to significantly enhance the recovery of MTBC members from tissue and paucibacillary respiratory samples collected from African buffaloes, African elephants, and white rhinoceros. Moreover, the TiKa system may improve success of MTBC culture from various sample types previously deemed unculturable from other species.     

Mitigating nitrous oxide emissions from agricultural soils by precision management

Nitrous oxide (N₂O) emissions make up a significant part of agricultural greenhouse gas emissions. There is an urgent need to identify new approaches to the mitigation of these emissions with emerging technology. In this short review four approaches to precision managements of agricultural systems are described based on examples of work being undertaken in the UK and New Zealand. They offer the opportunity for N₂O mitigation without any reduction in productivity. These approaches depend upon new sensor technology, modeling and spatial information with which to make management decisions and interventions that can both improve agricultural productivity and environmental protection.     

Variation in parasitoid attraction to herbivore-infested plants and alternative host plant cover mediate tritrophic interactions at the landscape scale

Landscape Ecology - Tritrophic interactions may be affected by local factors and the broader landscape context. At small spatial scales, carnivorous enemies of herbivorous insects use...     

Projecting the suitability of global and local habitats for myrtle rust (Austropuccinia psidii) using model consensus

Myrtle rust (caused by Austropuccinia psidii) affects more than 500 known host species in the Myrtaceae family. Three different modelling approaches (CLIMEX, MaxEnt and Multi-Model Framework) were used to project the habitat suitability for myrtle rust at both global and local scales. Current data on the global occurrence of myrtle rust were collected from online literature and expert solicitation. Long-term averages of climate data (1960–1990) were sourced from WorldClim and CliMond websites. Recent reports of myrtle rust in New Zealand were used for validation of model outputs but not in model training and testing. The model outputs were combined into a consensus model to identify localities projected to be suitable for myrtle rust according to two or three models (hotspots). In addition to the locations where the pathogen is currently present, all models successfully projected independent occurrence data in New Zealand suitable for establishment of the pathogen. Climate suitability for the pathogen was primarily related to temperature followed by rainfall in MaxEnt and the CLIMEX model. The results confirmed the optimum temperature range of this pathogen in the literature (15–25 °C). Additional analysis of the precipitation variables indicated that excessive rain (more than 2000 mm in warmest quarter of the year) combined with high temperatures (>30 °C) constrain pathogen establishment. The results of the current study can be useful for countries such as New Zealand, China, South Africa and Singapore where the pathogen has not fully spread or established.