Tomato yield, biomass accumulation, root distribution and irrigation water use efficiency on a sandy soil, as affected by nitrogen rate and irrigation scheduling

Florida is the largest producer of fresh-market tomatoes in the United States. Production areas are typically intensively managed with high inputs of fertilizer and irrigation. The objectives of this 3-year field study were to evaluate the interaction between N-fertilizer rates and irrigation scheduling on yield, irrigation water use efficiency (iWUE) and root distribution of tomato cultivated in a plastic mulched/drip irrigated production systems. Experimental treatments included three irrigation scheduling regimes and three N-rates (176, 220 and 230 kg ha⁻¹). Irrigation treatments included were: (1) SUR (surface drip irrigation) both irrigation and fertigation line placed right underneath the plastic mulch; (2) SDI (subsurface drip irrigation) where the irrigation line was placed 0.15 m below the fertigation line which was located on top of the bed; and (3) TIME (conventional control) with irrigation and fertigation lines placed as in SUR and irrigation being applied once a day. Except for the “TIME” treatment all irrigation treatments were controlled by soil moisture sensor (SMS)-based irrigation set at 10% volumetric water content which was allotted five irrigation windows daily and bypassed events if the soil water content exceeded the established threshold. Average marketable fruit yields were 28, 56 and 79 Mg ha⁻¹ for years 1-3, respectively. The SUR treatment required 15-51% less irrigation water when compared to TIME treatments, while the reductions in irrigation water use for SDI were 7-29%. Tomato yield was 11-80% higher for the SUR and SDI treatments than TIME where as N-rate did not affect yield. Root concentration was greatest in the vicinity of the irrigation and fertigation drip lines for all irrigation treatments. At the beginning of reproductive phase about 70-75% of the total root length density (RLD) was concentrated in the 0-15 cm soil layer while 15-20% of the roots were found in the 15-30 cm layer. Corresponding RLD distribution values during the reproductive phase were 68% and 22%, respectively. Root distribution in the soil profile thus appears to be mainly driven by development stage, soil moisture and nutrient availability. It is concluded that use of SDI and SMS-based systems consistently increased tomato yields while greatly improving irrigation water use efficiency and thereby reduced both irrigation water use and potential N leaching.     

Sodicity and salinity in a Brazilian Oxisol cultivated with sugarcane irrigated with wastewater

Changes in soil sodicity-salinity parameters are one of the most characteristic alterations after treated sewage effluent (TSE) irrigation in agro-systems. Considering the importance of these parameters for agricultural management, as well as the economical value of sugarcane for Brazil, the present study aimed at evaluating effects on soil sodicity and salinity under tropical conditions over 16 months of TSE irrigation in a sugarcane plantation at Lins, São Paulo State, Brazil. Soil samplings were carried out in February 2005 (before planting), December 2005 (after 8 months of TSE irrigation) and September 2006 (after 16 months of TSE irrigation) following a complete block design with four treatments and four replicates. Treatments consisted of: (i) control, without TSE irrigation; (ii) T100, T150 and T200, with TSE irrigation supplying 100% (0% surplus, total of 2524 mm), 150% (50% surplus, total of 3832 mm) and 200% (100% surplus, total of 5092 mm) of crop water demand, respectively. Compared to initial soil conditions, at the end of the experiment increases of exchangeable sodium (from 2.4 to 5.9 mmol_c kg⁻¹), exchangeable sodium percentage (ESP) (from 8 to 18%), soluble Na (from 1.4 to 4.7 mmol L⁻¹) and sodium adsorption ratio (SAR) of soil solution (from 3.6 to 12.6 (mmol L⁻¹)^0.5) were found in the soil profile (0-100 cm) as an average for the irrigated plots due to high SAR of TSE. Associated with the increments were mostly significant increases in clay dispersion rates at depths 0-10, 10-20 and 20-40 cm. Electrical conductivity (EC) of soil solution increased during the TSE irrigation period whereas at the end of the experiment, after short term discontinuation of irrigation and harvest, EC in the topsoil (0-10 and 10-20 cm) decreased compared to the previous samplings. Moreover, despite increasing sodicity over time mainly insignificant differences within the different irrigated treatments were found in December 2005 and September 2006. This suggests that independent of varying irrigation amounts the increasing soil sodicity over time were rather caused by the continuous use of TSE than by its quantity applied. Moreover, also plant productivity showed no significant differences within the TSE irrigated plots. The study indicates that monitoring as well as remediation of soil after TSE irrigation is required for a sustainable TSE use in order to maintain agricultural quality parameters.     

Channels and ditches as the last shelter for freshwater mussels: the case of Margaritifera auricularia and other naiads inhabiting the mid Ebro River Basin,Spain

• 1. Freshwater mussels or naiads are generally considered to thrive in river habitats, provided the ecological conditions are good. The presence of populations of these bivalves in artificial channels and ditches with natural bottoms has only scarcely been reported. The aim of this paper was to present the idea that these ‘channel’ and ‘ditch’ habitats could in fact be a sanctuary for naiads.
• 2. Approximately 80 km of several of these waterways fed by the mid Ebro River were sampled in Spain to monitor their naiad populations. Observations indicate that these habitats harbour substantial colonies of freshwater mussels (including two populations of adult specimens of the endangered species Margaritifera auricularia), much more so than the corresponding river.
• 3. The authors wish to alert conservation authorities and freshwater mussel experts to the extreme fragility and importance of this kind of habitat for the long‐term conservation of these imperilled molluscs.

Copyright © 2008 John Wiley & Sons, Ltd.     

Prediction of parental combination for introduction of stay-green associated loci in wheat

In wheat, the increase of yield and stability associated traits can be achieved by combining parents containing the stay-green trait and favorable alleles for grain yield. The aim of this work was to analyze the genetic dissimilarity between wheat lines from stay-green and synchronized maturation groups and elite cultivars. Moreover, to propose promising combinations seeking the selection of high-grain yield and high bread-making quality genotypes containing stay-green trait. The experiment was conducted in a randomized block design with three replications in 2003, 2004, and 2005, using sister-lines with the presence and absence of stay-green trait and elite cultivars. Genetic variability exists among wheat strains from the synchronized stay-green maturation group and elite cultivars. Genotypes of maturation group stay-green obtained an average performance superior to the synchronized group. Crosses between stay-green lines and the CEP 29 and BRS 177 cultivars are promising in the selection of genotypes carrying the stay-green trait with high yield and bread-making quality.     

Purification of xylitol obtained by fermentation of corncob hydrolysates

Hydrolysates obtained by autohydrolysis-posthydrolysis of corncobs were detoxified with charcoal, concentrated, supplemented with nutrients, and fermented with Debaryomyces hansenii. After biomass removal, the fermented media contained 0.1137 kg of nonvolatile components (NVC)/kg of liquor, which corresponded mainly to xylitol (0.6249 kg/kg of NVC) but also to minor amounts of inorganic components (measured as ashes), proteins, nonfermented sugars (xylose and arabinose), uronic acids, arabitol, and other nonvolatile components (ONVC). The media were subjected to further processing (sequential stages of adsorption, concentration, ethanol precipitation, concentration, and crystallization) to obtain food-grade xylitol. Adsorption experiments were carried out at various solid-to-liquor ratios. Under selected conditions (1 kg of charcoal/15 kg of liquors), the xylitol content increased to 0.6873 kg/kg of NVC, and almost total decoloration was achieved. The resulting liquor was concentrated by evaporation to increase its NVC content to 0.4032 kg/kg of liquor (corresponding to a xylitol concentration of 0.280 kg/kg of liquor), and ethanol was added to precipitate a part of the NVC (mainly proteins, but also uronic acids, ashes, and other nonvolatile compounds). Refined liquors (containing 0.7303 kg of xylitol/kg of NVC) were concentrated again, and ethanol was added (to reach 40-60% volume of the stream) to allow crystallization at -10 or -5 degrees C. Under selected conditions, 43.7% of xylitol contained in the initial fermentation broth was recovered in well-formed, homogeneous crystals, in which xylitol accounted for 98.9% of the total oven-dry weight. Material balances are presented for the whole processing scheme considered in this work.     

Antibacterial and antioxidant activities of essential oils isolated from Thymbra capitata L. (Cav.) andOriganum vulgare L

Antilisterial activities of Thymbra capitata and Origanum vulgare essential oils were tested against 41 strains of Listeria monocytogenes. The oil of T. capitata was mainly constituted by one component, carvacrol (79%), whereas for O. vulgare three components constituted 70% of the oil, namely, thymol (33%), gamma-terpinene (26%), and p-cymene (11%). T. capitata essential oil had a significantly higher antilisterial activity in comparison to O. vulgare oil and chloramphenicol. No significant differences in L. monocytogenes susceptibilities to the essential oils tested were registered. The minimum inhibitory concentration values of T. capitata essential oil and of carvacrol were quite similar, ranging between 0.05 and 0.2 microL/mL. Antioxidant activity was also tested, the essential oil of T. capitata showing significantly higher antioxidant activity than that of O. vulgare. Use of T. capitata and O. vulgare essential oils can constitute a powerful tool in the control of L. monocytogenes in food and other industries.     

Energy and water balance measurements for water productivity analysis in irrigated mango trees, Northeast Brazil

Crop water parameters, including actual evapotranspiration, transpiration, soil evaporation, crop coefficients, evaporative fractions, aerodynamic resistances, surface resistances and percolation fluxes were estimated in a commercial mango orchard during two growing seasons in Northeast Brazil. The actual evapotranspiration (E_a) was obtained by the eddy covariance (EC) technique, while for the reference evapotranspiration (E₀); the FAO Penman–Monteith equation was applied. The energy balance closure showed a gap of 12%. For water productivity analysis the E_a was then computed with the Bowen ratio determined from the eddy covariance fluxes. The mean accumulated E_a for the two seasons was 1419 mm year⁻¹, which corresponded to a daily average rate of 3.7 mm day⁻¹. The mean values of the crop coefficients based on evapotranspiration (K_c) and based on transpiration (K_cb) were 0.91 and 0.73, respectively. The single layer K_c was fitted with a degree days function. Twenty percent of evapotranspiration originated from direct soil evaporation. The evaporative fraction was 0.83 on average. The average relative water supply was 1.1, revealing that, in general, irrigation water supply was in good harmony with the crop water requirements. The resulting evapotranspiration deficit was 73–95 mm per season only. The mean aerodynamic resistance (r_a) was 37 s m⁻¹ and the bulk surface resistance (r_s) was 135 s m⁻¹. The mean unit yield was 45 tonne ha⁻¹ being equivalent to a crop water productivity of 3.2 kg m⁻³ when based on E_a with an economic counterpart of US$ 3.27 m⁻³. The drawback of this highly productive use of water resources is an unavoidable percolation flux of approximately 300 mm per growing season that is detrimental to the downstream environment and water users.     

Strategy to identify resistance to white mould associated with high yield for irrigated common bean in Brazil

Development of common bean cultivars with partial white mould resistance through breeding techniques has been a challenge in Brazil. As yet, lines/cultivars from breeding programmes have not been investigated for resistance; therefore, this study screened 107 lines/cultivars for their reactions to white mould in 14 preliminary trials conducted under irrigation. Thirteen resistant lines/cultivars (three of Andean origin) and six Mesoamerican cultivars (three intermediately resistant and three susceptible) were selected for further investigation. These lines/cultivars and the resistant control A195 were evaluated in six advanced trials and two straw tests to assess the effectiveness of the screening procedure. In 11 preliminary trials, screenings were performed under moderate/high or higher disease pressure. These pressures occurred in two advanced trials in which, when yields were averaged across moderate/high and high pressures, 10 Mesoamerican lines/cultivars selected for resistance yielded 14%, 23%, and 38% more than intermediately resistant cultivars, A195, and susceptible cultivars, with median disease ratings (1–9 scale) of 4.5, 5.7, 5.7, and 6.7, respectively. In the straw test, three Andean lines/cultivars (A195 included) and two susceptible cultivars in the field were among those with the highest levels of physiological resistance. Thus, field rating under high disease pressure and greenhouse rating did not correlate significantly, suggesting that field trials are critical to evaluating resistance and to identifying high-yielding beans. Therefore, lines/cultivars from breeding programmes assessed in field trials may provide a low cost and fast way to identify high-yielding bean cultivars with partial resistance to white mould in the subtropical southern hemisphere.     

Genes related to flooding tolerance during germination and early growth of weedy rice

Evolution of flooding tolerance in weedy rice has occurred in several rice-growing regions, but the genes related to this process and the environmental effects are unknown. The objective of this study was to analyse the expression of genes related to flooding tolerance in response to temperature and flooding during the initial establishment of weedy rice. The experiments were carried out with rice cultivars IRGA 417 and Nipponbare, which are sensitive to flooding, and weedy rice ITJ03 and AV04 genotypes that have high and intermediate tolerance to flooding, respectively. The expression of genes related to reserve mobilisation, anaerobic respiration, escape and quiescence strategies was analysed at periods up to 24 days after sowing. The flooding tolerance of weedy rice genotype ITJ03 was associated with the expression of RAmy3D and OsTPP7 , which are involved in the mobilisation of carbohydrate reserves, ADH1 and ADH2, which participate in anaerobic respiration, and SNRKL1 that triggers rapid elongation of the coleoptile and emergence. Although the genes PDC1, SUS3 and SUB1 are important for flooding tolerance in cultivated rice, their expression was not directly related to flooding tolerance in weedy rice. A temperature of 20°C reduced levels of expression of the RAmy3D, ADH2 and SNRKL1 genes and low temperature had a negative effect on the establishment of weedy rice. Breeding of rice genotypes with tolerance of low temperatures and anaerobic conditions may be a viable strategy to improve the control of weedy rice in paddy fields.