Subcellular localization and isoenzyme pattern of peroxidase and polyphenol oxidase in beet root (Beta vulgaris L.)

The two enzymes involved in enzymatic browning reactions, polyphenol oxidase (PPO) and peroxidase (PO), have been partially purified and extracted from different fractions of beet root. PPO is mainly located in the membrane fraction, and it was also found in the soluble fraction. In both cases PPO was in its latent state. However, PO activity was higher in the soluble fraction than in the membrane fraction. Nevertheless, the highest values of specific activity for PO were obtained from the solubilized enzyme from acetone powders. Under native isoelectric focusing (IEF), several PPO isoenzymes were present in the pH range of 4.8-5.8. All of these isoenzymes shared a single band with a similar apparent mass under sodium dodecyl sulfate-polyacrylamide gel electrophoresis. PO was also analyzed by IEF, showing a complex isoenzyme pattern in all fractions. The characteristic basic PO isoenzyme of high pI found in both the soluble fraction and the solubilized enzyme from acetone powders was not detected in the membrane fraction. The kinetic characterization of PPO and PO from all fractions was carried out.     

Analysis of organophosphorus pesticides in honeybee by liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry

Pesticides applied in extended agricultural fields may be controlled by means of bioindicators, such as honeybees, in which are the pesticides bioaccumulate. Liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (LC-APCI-MS) experiments with positive (PI) and negative (NI) ion modes were optimized for the analysis of 22 organophosphorus pesticides in honeybee samples. The extraction required 3 g of sample, which was extracted with acetone. The extract was purified with coagulating solution and reextracted with Cl(2)CH(2). Pesticides studied could be detected by both ionization modes except for parathion, parathion-methyl, and bromophos, which did not give signals in PI mode, and triazophos, which was not detected in NI mode. Fragmentation voltage and vaporizer temperature were optimized to achieve the highest sensitivity. The spectra profile of each pesticide in PI mode showed the [M + H](+) ion as the main signal, whereas in NI mode only fragment ions were shown. The detection limit obtained in selected ion monitoring mode ranged from 1 to 15 microg kg(-1). The average recoveries from spiked honeybees at various concentration levels (0.5-5 mg kg(-1)) exceeded 65% with relative standard deviations of 4-15%. The method was applied to real samples, in which residues of coumaphos and dimethoate were detected.     

Some Nutritional Characteristics of Enzymatically Resistant Maltodextrin from Cassava (<Emphasis Type="Italic">Manihot esculenta</Emphasis> Crantz) Starch

Cassava (Manihot esculenta Crantz) native starch was treated with pyroconversion and enzymatic hydrolysis to produce a pyrodextrin and an enzyme-resistant maltodextrin. Some nutritional characteristics were quantified for both compounds. Pyroconversion was done using a 160:1 (p/v) starch:HCl ratio, 90 °C temperature and 3 h reaction time. The resulting pyrodextrin contained 46.21% indigestible starch and 78.86% dietary fiber. Thermostable α-amylase (0.01%) was used to hydrolyze the pyrodextrin at 95 °C for 5 min. The resulting resistant maltodextrin contained 24.45% dextrose equivalents, 56.06% indigestible starch and 86.62% dietary fiber. Compared to the cassava native starch, the pyrodextrin exhibited 56% solubility at room temperature and the resistant maltodextrin 100%. The glycemic index value for the resistant maltodextrin was 59% in healthy persons. Its high indigestible starch and dietary fiber contents, as well as its complete solubility, make the resistant maltodextrin a promising ingredient for raising dietary fiber content in a wide range of foods, especially in drinks, dairy products, creams and soups.     

Step-wise drops in modularity and the fragmentation of exploited marine metapopulations

Context

Many nearshore species are distributed in habitat patches connected only through larval dispersal. Genetic research has shown some spatial structure of such metapopulations and modeling studies have shed light onto possible patterns of connectivity and barriers. However, little is known about human impact on their spatial structure and patterns of connectivity.

Objectives

We examine the effects of fishing on the spatial and temporal dynamics of metapopulations of sedentary marine species (red sea urchin and red abalone) interconnected by larval dispersal.

Methods

We constructed a metapopulation model to simulate abalone and sea urchin metapopulations experiencing increasing levels of fishing mortality. We performed the modularity analysis on the yearly larval connectivity matrices produced by these simulations, and analyzed the changes of modularity and the formation of modules over time as indicators of spatial structure.

Results

The analysis revealed a strong modular spatial structure for abalone and a weak spatial signature for sea urchin. In abalone, under exploitation, modularity takes step-wise drops on the path to extinction, and modules breakdown into smaller fragments followed by module and later metapopulation collapse. In contrast, sea urchin showed high modularity variation, indicating high- and low-mixing years, but an abrupt collapse of the metapopulation under strong exploitation.

Conclusions

The results identify a disruption in larval connectivity and a pattern of collapse in highly modular nearshore metapopulations. These results highlight the ability of modularity to detect spatial structure in marine metapopulations, which varies among species, and to show early changes in the spatial structure of exploited metapopulations.

     

Obtaining medical textiles including microcapsules of the ozonated vegetable oils

In this paper, it was aimed to obtain disposable medical textiles having antibacterial and wound healing properties, as well as biological adaption. For this purpose, the St. John’s Wort oil and flax seed oil were ozonated, and the oils were capsulated with arabic gum. The produced ozonated oils were characterized through FTIR and TGA analyses, as well as the properties of antibacterial, wound healing, and biological adaption were investigated. The produced microcapsules were examined via optical microscope and FTIR. The characterized microcapsules of the ozonated oils were applied to the textiles with padding method. After the applications, the fabrics were researched with SEM and FTIR analyses; in addition the antibacterial and wound healing properties and biological adaption of the textiles were also investigated. The results showed that the St. John’s Wort oil and flax seed oil were successfully ozonated and microcapsulated. The microcapsules of the oils could be applied to the fabric samples with the determined application recipe. The ozonated oils and the fabric samples applied microcapsules of the ozonated oils gained high antibacterial and wound healing property. In addition, the fabric samples were produced as having biological adaptation.     

Effect of combined stress (salinity + hypoxia) and auxin rooting hormone addition on morphology and growth traits in six Salix spp. clones

New Forests - Willows plantations development could be an alternative for hydro-halomorphic soils but it is limited by combined stress salinity?+?hypoxia (main stressor under...     

Successive grafting confers juvenility traits to adult Spanish red cedar (Cedrela odorata Linnaeus): a tool for the rescue of selected materials

New Forests - Spanish red cedar, Cedrela odorata L. (Meliaceae), is a valuable timber tree in tropical American forests. Existing demand for elite individuals endangers the conservation of...     

Chitosan-Based Films with 2-Aminothiophene Derivative: Formulation,Characterization and Potential Antifungal Activity

In this study, films of chitosan and 2-amino-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile (6CN), a 2-aminothiophene derivative with great pharmacological potential, were prepared as a system for a topical formulation. 6CN-chitosan films were characterized by physicochemical analyses, such as Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electronic microscopy (SEM). Additionally, the antifungal potential of the films was evaluated in vitro against three species of Candida (C. albicans, C. tropicalis, and C. parapsilosis). The results of the FTIR and thermal analysis showed the incorporation of 6CN in the polymer matrix. In the diffractogram, the 6CN-chitosan films exhibited diffraction halos that were characteristic of amorphous structures, while the micrographs showed that 6CN particles were dispersed in the chitosan matrix, exhibiting pores and cracks on the film surface. In addition, the results of antifungal investigation demonstrated that 6CN-chitosan films were effective against Candida species showing potential for application as a new antifungal drug.     

Total Phenolic Levels,In Vitro Antioxidant Properties,and Fatty Acid Profile of Two Microalgae,Tetraselmis marina Strain IMA043 and Naviculoid Diatom Strain IMA053, Isolated from the North Adriatic Sea

This work studied the potential biotechnological applications of a naviculoid diatom (IMA053) and a green microalga (Tetraselmis marina IMA043) isolated from the North Adriatic Sea. Water, methanol, and dichloromethane (DCM) extracts were prepared from microalgae biomass and evaluated for total phenolic content (TPC) and in vitro antioxidant properties. Biomass was profiled for fatty acid methyl esters (FAME) composition. The DCM extracts had the highest levels of total phenolics, with values of 40.58 and 86.14 mg GAE/g dry weight (DW in IMA053 and IMA043, respectively). The DCM extracts had a higher radical scavenging activity (RSA) than the water and methanol ones, especially those from IMA043, with RSAs of 99.65% toward 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) at 10 mg/mL, and of 103.43% against 2,2-diphenyl-1-picrylhydrazyl (DPPH) at 5 mg/mL. The DCM extract of IMA053 displayed relevant copper chelating properties (67.48% at 10 mg/mL), while the highest iron chelating activity was observed in the water extract of the same species (92.05% at 10 mg/mL). Both strains presented a high proportion of saturated (SFA) and monounsaturated (MUFA) fatty acids. The results suggested that these microalgae could be further explored as sources of natural antioxidants for the pharmaceutical and food industry and as feedstock for biofuel production.