PEG bulking of wood cell walls as affected by moisture content and nature of solvent

Movement of polyethylene glycol (PEG) 1000 from wood cell lumens into adjacent cell walls was studied for different cell wall moisture contents (MCs) and PEG solvents; relative amounts of PEG that penetrated into the cell walls were estimated by Raman microscopy. It was shown that samples treated with PEG from chloroform solution adsorb less PEG than samples treated with PEG-water solution even in the case of samples with open cell wall structure near fibre saturation point MC. Reconditioning of PEG-chloroform treated samples at high relative humidities enhanced PEG bulking of cell walls, but not to the maximum amounts observed with PEG-water treatments. Raman microscopy was a useful tool for estimating relative PEG amounts in the cell walls.     

Seasonal dynamics of mineral N pools and N-mineralization in soils under homegarden trees in South Andaman,India

Agroforestry trees are now well known to play a central role in the build up of nutrients pools and their transformations similar to that of forest ecosystem, however, information on the potential of homegarden trees accumulating and releasing nitrogen (mineralization) is lacking. The present study reports seasonal variations in pool sizes of mineral N (NH₄⁺-N and NO₃⁻-N), and net N-mineralization rate in relation to rainfall and temperature under coconut (Cocos nucifera L.), clove (Eugenia caryophyllata Thunb) and nutmeg (Myristica fragrans Houtt. Nees) trees in a coconut-spice trees plantation for two annual cycles in the equatorial humid climate of South Andaman Island of India. Concentration of NH₄⁺-N was the highest during wet season (May–October) and the lowest during post-wet season (November–January) under all the tree species. On the contrary, concentration of NO₃⁻-N was the lowest in the wet season and the highest during the post-wet season. However, concentrations of the mineral N were the highest under the nutmeg and the lowest under the coconut trees. Like the pool sizes, mean annual mineralization was the highest under the nutmeg (561 mg kg⁻¹ yr⁻¹) and the lowest under the coconut trees (393 mg kg⁻¹ yr⁻¹). Rate of mineralization was the highest during the post-wet season and the lowest during the dry season (February–April) under all the tree species. High rainfall during the wet season, however, reduced the rate of nitrification under all the tree species. The mean annual mineralization was logarithmically related with rainfall amount and mean monthly temperature.     

Moisture content penetration in wood elements under varying boundary conditions

Knowledge of effects of moisture exposure on timber structures is important for serviceability and load bearing capacity of timber elements and systems. Varying climate affects the moisture content profiles in timber as the relative humidity changes in the ambient air. This paper presents methods for calculation of diffusion based moisture transport and corresponding results on how timber responds to varying moisture with regard to moisture penetration and distribution. The calculations are based on measured outdoor relative humidity and temperature at different climatic locations in Sweden. No remarkably large deviations between the different climatic locations were found in general, which is positive in a design code perspective.     

Influence of stem rot pathogen <Emphasis Type="Italic">Fomitiporia</Emphasis> sp. on “Sanbu-sugi” cultivar of the Japanese cedar <Emphasis Type="Italic">Cryptomeria japonica</Emphasis>

An unidentified Fomitiporia sp. causes severe white-rot on stems of a cultivar “Sanbu-sugi” of the Japanese cedar, Cryptomeria japonica. The influence of the fungus on tree health and wood properties was determined. Bark from dead branches and xylem from living branches contained more glucose than bark from living branches and xylem from dead branches. Tree heights at which annual rings were disconnected were 2, 4 and 6 m at ages 37, 15 and 24 years old, respectively. The pH values of damaged parts were lower than those of non-damaged parts, and the damaged parts were clearly identified using bromocresol green solution. Weight loss of sapwood during 60 days of fungal degradation was 1.4 %, which was less than that by a saprophyte, Trametes versicolor. The amount of polyphenols in the heartwood from damaged tree stems was less than that from non-damaged stems. Degraded parts were less stiff than the non-degraded sapwood as measured with a wood-decay tester, Pilodyn. Our observations indicate that damaged stems are chemically and physically inferior to non-damaged stems.     

Anisotropy of wood vibrational properties: dependence on grain angle and review of literature data

The anisotropy of vibrational properties influences the acoustic behaviour of wooden pieces and their dependence on grain angle (GA). As most pieces of wood include some GA, either for technological reasons or due to grain deviations inside trunks, predicting its repercussions would be useful. This paper aims at evaluating the variability in the anisotropy of wood vibrational properties and analysing resulting trends as a function of orientation. GA dependence is described by a model based on transformation formulas applied to complex compliances, and literature data on anisotropic vibrational properties are reviewed. Ranges of variability, as well as representative sets of viscoelastic anisotropic parameters, are defined for mean hardwoods and softwoods and for contrasted wood types. GA-dependence calculations are in close agreement with published experimental results and allow comparing the sensitivity of different woods to GA. Calculated trends in damping coefficient (tanδ) and in specific modulus of elasticity (E′/ρ) allow reconstructing the general tanδ-E′/ρ statistical relationships previously reported. Trends for woods with different mechanical parameters merge into a single curve if anisotropic ratios (both elastic and of damping) are correlated between them, and with axial properties, as is indicated by the collected data. On the other hand, varying damping coefficient independently results in parallel curves, which coincide with observations on chemically modified woods, either “artificially”, or by natural extractives.     

Evaluation of biological activities of extracts from the fruiting body of <Emphasis Type="Italic">Pleurotus citrinopileatus</Emphasis> for skin cosmetics

Pleurotus citrinopileatus Singer has recently become a popular delicacy in East Asian countries. We prepared a methanol extract, soluble fractions from the methanol extract, and a hot water extract of the fruiting bodies of P. citrinopileatus. The biological activities such as melanin biosynthesis inhibition, tyrosinase inhibition, antioxidant activities [1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging, oxygen radical absorbance capacity (ORAC), and superoxide dismutase (SOD)-like activity], antibacterial activities, and antihyaluronidase activities of these extracts were evaluated. We found that the n-hexanesoluble, diethyl ether-soluble, and ethyl acetate-soluble fractions exhibited melanin biosynthesis inhibition in B16 melanoma cells, as well as antioxidant (ORAC) and antibacterial activities. However, the n-butanol-soluble and water-soluble fractions and the methanol and hot water extracts exhibited antioxidant (DPPH radical scavenging, SOD-like activity) and antihyaluronidase activities. These results indicate that the fruiting bodies of P. citrinopileatus have the potential to be used as an ingredient in skin cosmetics.     

A case study of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> fingerprinting for breeding

• Introduction  

Tree genetic improvement programs usually lack, in general, pedigree information. Since molecular markers can be used to estimate the level of genetic similarity between individuals, we genotyped a sample of a Portuguese Eucalyptus globulus breeding population—a reference population of 125 individuals—with 16 microsatellites (SSR).     

Relating genetic variation of ecologically important tree traits to associated organisms in full-sib aspen families

Knowledge on phenological, morphometric, and phytochemical variation of local progenies of European aspen (Populus tremula, L.) is limited. The goal of this study was to characterize variation in growth and ecologically important leaf properties in aspen full-sib families in relation to interacting organisms (mycorrhiza, endophytes, and insects) and to determine whether these interactions were affected by soil application of a systemic fungicide. In local progenies, within-family variation of neutral molecular genetic markers (nuclear microsatellites) was higher than between families. Significant variation in growth, production of phenolic defensive compounds and other phytochemical leaf traits was found between families. Phenolic compounds showed clear negative correlation with generalist herbivores, but did not result in negative trade-off with biomass production. Differences in mycorrhizal colonization were not found among full-sib families and application of a systemic fungicide suppressed neither mycorrhizal colonization nor infestation with insects. However, a strong suppression of endophytes occurred, whose long-term consequences may require attention when fungicides are used in agroforestry plantations.     

Development of an air-injection press for preventing blowout of particleboard II: improvement of board properties using small-diameter holes for air injection

An air-injection press, which has holes punched in the heating plates, injects high-pressure air through the holes of one plate into boards during press heating. The air-injection press can manufacture boards from high-moisture-content particles by controlling blowouts of the boards. In this study, boards were manufactured from particles that had a moisture content of 25% by using the air-injection press, which reduced the required pressing time. Boards manufactured by injecting air through holes of 5 mm in diameter were of poor quality with a low internal bond strength of only 0.31 MPa. When the hole diameter was reduced to 1 mm, the internal bond strength increased to 0.44 MPa. A high air-injection pressure of 0.55 MPa also resulted in improved board properties over those for boards manufactured at lower pressures. This was probably because a large amount of binder was released from boards through the 5-mm holes, together with water vapor, during air injection; the small-diameter holes reduced the release of binder, resulting in better board properties.     

Grouping of <Emphasis Type="Italic">Tectona grandis</Emphasis> (L.f.) clones using wood color and stiffness

Commercial Tectona grandis plantations using clones have attracted considerable interest for lumber production in tropical regions where small areas are frequent. However, studies on wood properties are limited. Therefore, the purpose of this study is to group clones with similar wood color characteristics using the CIELab system, and mechanical resistance by dynamic stiffness (Ed) in order to obtain different types of clones for different climate and edaphic conditions. It was found that lightness (L*), yellowness (b*), redness (a*), and Ed are similar to those found for other plantation trees. These wood characteristics are significantly influenced by clone and site. Variance due to clone and site went from 31 to 53% and from 2.95 to 24.22%, respectively. Another source of variance was distance from pith, with the exception of parameter b*, which was not affected. Finally, clones were grouped (using multivariate analysis) according to color and mechanical resistance. This analysis established 4 groups by color and 5 groups by Ed. Clone clustering will allow us to choose or use clones with similar wood properties according to site and environmental conditions increasing area production and wood quality uniformity.