Use of diatomaceous earth for the management of stored-product pests

Diatomaceous earth (DE) is almost pure amorphous silicon dioxide, made up of fossilised diatoms; it acts as an insecticide by absorption of epicuticular lipids and fatty acids, leading to desiccation in arthropods. Numerous DE formulations have been attempted for the management of stored-product pests with good results. DE is persistent in its action, poses few or no pest resistance problems, and it leaves no residue. The efficacy of DE is affected by factors such as: its provenance, temperature, humidity and characteristics of target pests and substrate. Application of DE at currently recommended doses causes changes in bulk density of the grain; however, the use of enhanced DE formulations provides control at much lower doses. Therefore, new formulations of DEs usually include other low toxicity insecticides.     

Effects of Strobilanthes crispus tea aqueous extracts on glucose and lipid profile in normal and streptozotocin-induced hyperglycemic rats

Strobilanthes crispus (Acanthaceae) has been used traditionally as antidiabetic, diuretic, antilytic, and laxative and has been proven scientifically to possess high antioxidant activity, anti-AIDS, and anticancer properties. It is commonly consumed in the form of herbal tea. The ethnopharmacological value of this plant, such as the development of nutraceutical S. crispus herbal tea (fermented and unfermented) and assessment of their antihyperglycemic properties were investigated. The antidiabetic properties of S. crispus fermented and unfermented tea was carried out in normal and streptozotocin-induced hyperglycaemic rats for 21 days. Glucose and lipid profile (total cholesterol, triglyceride, HDL-cholesterol, LDL-cholesterol) were determined at day 0 (baseline), day 7, and day 21. The results showed that the hot water extract of both fermented and unfermented S. crispus tea reduced blood glucose in hyperglycaemic rats. S. crispus unfermented tea also reduced glucose level in normal rat. Both fermented and unfermented S. crispus tea also showed to improve lipid profile. Antioxidant and polyphenol content that present in the extracts might contribute to the antihyperglycemic and antilipidemic properties. Further study is needed to be carried out in pre-clinical and clinical environment to prove its efficacy in human.     

Effectiveness of single and combined use of selected dietary probiotic and prebiotics on growth and intestinal conditions of striped catfish (Pangasianodon hypophthalmus,Sauvage, 1978) juvenile

Aquaculture International - Single or combined effect of yeast, galactooligosaccharide (GOS), mannanoligosaccharide (MOS), and β-glucan was evaluated on the growth performance, nutrient...     

Unravelling the diversity and assemblage of phytoplankton in homestead ponds of central coastal belt,Bangladesh

Homestead ponds may offer an ideal opportunity in contribution to household income, fish consumption through fish culture. Phytoplankton plays a key indicator in pond productivity. However, the phytoplankton communities in the homestead ponds are nearly undetermined in Bangladesh. This study summarizes the phytoplankton diversity, assemblage and ecological parameters of the homestead ponds in central coastal belt, Bangladesh, based on two seasons. The results revealed that significant differences (p < .05) were found in pH, DO, conductivity, TDS, nitrates, phosphates and sulphates except temperature in monsoon, and transparency in both seasons. A total of 34 phytoplankton genera representatives of five major groups were recorded such as Euglenophyceae (41.5%), Chlorophyceae (30.5%), Cyanophyceae (13%), Dinophyceae (10%) and Bacillariophyceae (5%). A significant difference (p < .05) in phytoplankton abundance was found in both seasons with the highest mean of 186.13 ± 129.34 × 10⁴ cells L^?1 in monsoon and the lowest mean of 144.40 ± 107.26 × 10⁴ cells L^?1 during winter. The diversity (H'), evenness (J'), richness (d) and dominance (D) ranged from 1.62 to 2.47, 0.52 to 0.97, 0.37 to 1.15 and 0.10 to 0.28 respectively. Based on SIMPER, the most dominant (>10%) genera for dissimilation within stations and seasons were Euglena spp., Phacus spp., Chlorella spp., Strombomonas spp. and Peridinium spp. ANOSIM results stated that 12 genera of phytoplankton were significant contributors based on average dissimilarity. Pearson's correlation coefficient and canonical correspondence analysis (CCA) revealed that phytoplankton abundance, diversity and community were mainly governed by transparency, dissolved oxygen and nitrates.     

Optimized Extraction,Preliminary Characterization and Evaluation of the in Vitro Anticancer Activity of Phlorotannin-Rich Fraction from the Brown Seaweed,Cystoseira sedoides

Brown seaweeds produce useful bioactive substances with high cosmetic and pharmacological values due to the presence of antioxidant derivatives, mainly phlorotannins (PHT), which are of particular interest. A central composite rotatable design (CCRD) with three variables (extraction time, dry material-to-solvent ratio and ethanol concentration) and two responses was performed to optimize the microwave-assisted extraction (MAE) of phlorotannins from Cystoseira sedoides using response surface methodology (RSM). Results showed that the independent variables significantly affected both phlorotannin content and the scavenging capacity. The optimum operating conditions were extraction time, 101.74 sec; dry material-to-solvent ratio, 1:10 g/mL; and ethanol extraction, 50%. Under these conditions, the predicted values of PHT content and radical scavenging activity-IC50 were close to the observed values and were 383.887 µg PGE/g Dm and 18.353 µg/mL, respectively. Characterization of the phlorotannin-rich fraction was conducted by high-performance liquid chromatography and Fourier transform infrared spectroscopy. The evaluation of the anticancer activity against MCF-7 breast cancer cell line showed a potent activity to trigger apoptotic death in more than a half of the MCF-7 cells, with an estimated IC50 value of 78 μg/mL. In addition, this fraction induced a notable growth regression effect on 3D spheroids model in a concentration-dependent manner, with a growth rate of about 1.17, at 200 µg/mL.

Abbreviations: CCRD: Central composite rotatable design; Dm: Dry material; DMBA: 2,4-dimethoxy benzaldehyde; DMSO: Dimethyl sulfoxide; DPPH: 1,1-diphenyl-2-picrylhydrazyl; EDTA: Ethylene diamine tetraacetic acid; FBS: Fetal bovine serum; FT-IR: Fourier transform infrared; HPLC: High-performance liquid chromatography; IC₅₀: Half-maximal inhibitory concentration; MAE: Microwave-assisted extraction; Min: minutes; PBS: Phosphate buffered saline; PGE: Phloroglucinol equivalent; PHT: Phlorotannins; PHT-SED: phlorotannins derived from Cystoseira sedoides; PI: Propidium iodide; RSA: Radical scavenging activity; RSM: Response surface methodology; Sec: seconds     

Simultaneous Extraction and Fractionation of Fish Oil from Tuna By-Product Using Supercritical Carbon Dioxide (SC-CO2)

ABSTRACT

Fish oil was extracted and simultaneously collected into six fractions based on molecular weight and the chain length of triglycerides in terms of fatty acid constituents without splitting of the triglycerides, using supercritical carbon dioxide (SC-CO₂) at optimized conditions of 40 MPa, 65°C, and a flow rate 3 mL min^?1. In each type of fractionation, the first fraction (F1) was rich in saturated fatty acids (SFA; 52.57 to 61.26%), followed by monounsaturated fatty acids (MUFA; 22.17 to 23.22%) and polyunsaturated fatty acids (PUFA; (0.54 to 20.37%); the sixth fraction (F6) was rich in PUFA (48.93%), followed by MUFA (33.59%) and SFA (13.61%). It was obvious that short-chain fatty acids were extracted at an earlier fraction; therefore, the latter fractions were dominant in long-chain fatty acids, especially MUFA and PUFA. Thus, omega-3 fish oil (last three fractions) was successfully separated to be used as a value-added health product.     

A REVIEW OF PRODUCTION FRONTIER RESEARCH IN AQUACULTURE (2001–2011)

Most research works on the production frontier in aquaculture focus on efficiency measurement using either Stochastic Production Frontier (SPF) or Data Envelopment Analysis (DEA). The studies on productivity growth in aquaculture were limited, perhaps due to lack of time-series data. Nevertheless, total factor productivity analysis (TFP) in fish farms has started gaining popularity in recent years. In addition, the majority of the efficiency studies have centered on technical efficiency analysis but substantial increases in the output levels can be fully realized through improving overall economic efficiency. Therefore, this review suggests that future research should estimate all three efficiency indices (i.e., technical, allocative and economic efficiencies).     

An approach to determining forest areas with recreational potential: The case of forest areas around main transportation roads in the Maçka Region of Trabzon,Turkey

It is most important to determine areas with recreation potential that can permit sustainable use of forest resources and also meet recreational uses. Under the method described in this study, using the Geographic Information System (GIS), a spatial suitability model for recreational use was combined with a recreational priority perceptual suitability model that depends on principal component analysis (PCA) and is based on the perceptions of both recreational users and experts. Using principal component analysis, five priority components explaining 69.371% of the total variance were identified out of 12 perceptual suitability components. These components are scenic beauty, accessibility, the surface of the landscape, tree type, and forest stand condition. The recreation terrain suitability value of an area with recreational potential was assessed with the assistance of these five priority components. This enabled us to generate a recreation terrain suitability value equation and a recreation terrain suitability value scale for a potential recreation area. This applicability of this approach was demonstrated in the identification of potential recreation areas in Trabzon, Turkey.     

Visible-Light-Driven Photocatalytic N-Doped TiO<Subscript>2</Subscript> for Degradation of Bisphenol A (BPA) and Reactive Black 5 (RB5) Dye

Bisphenol A (BPA) and reactive black 5 (RB5) dye are among the most persistent and non-biodegradable contaminants in water which require an urgent need for the development of effective removal method. The ubiquitous existence of both contaminants could interfere with the human health and aquatic environmental balance. Photocatalytic process as one of advanced oxidation processes (AOPs) has shown high performance for degradation of organic compounds to the harmless materials under sensible condition. Therefore, this study aims to develop a visible-light-driven photocatalyst that can efficiently degrade BPA and RB5 present in household water. N-doped TiO₂ were successfully synthesized via simple and direct sol–gel method. The prepared TiO₂ nanoparticles were characterized by field emission scanning microscope (FE-SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and Brunauere Emmette Teller (BET) analysis. The incorporation of nitrogen in TiO₂ lattice exhibited excellent optical responses to visible region as revealed by UV–Vis–NIR spectroscopy absorption capability at 400–600 nm. The photocatalytic activity of the N-doped TiO₂ nanoparticles was measured by photocatalytic degradation of BPA and RB5 in an aqueous solution under visible-light irradiations. Degradation of BPA and RB5 was 91.3% and 89.1%, respectively after 360 min illumination. The degradation of BPA and RB5 by N-doped TiO₂ was increased up to 89.8% and 88.4%, respectively under visible-light irradiation as compared to commercial TiO₂ P25. This finding clearly shows that N-doped TiO₂ exhibits excellent photocatalytic degradation of BPA and RB5 under visible irradiation, hence have a promising potential in removing various recalcitrant contaminants for water treatment to fulfill the public need to consume clean water.

Open image in new window

Graphical Abstract ?

     

Response Surface Methodology for Modeling Bisphenol A Removal Using Ultrafiltration Membrane System

In this work, the effects of various operating parameters (pressure, pH, BPA concentration, and filtration time) toward bisphenol A (BPA) removal via ultrafiltration (UF) membrane system were investigated using response surface methodology (RSM). Historical data design of RSM was used to obtain the interaction between variables and response as well as optimizing the process. The analysis of variance (ANOVA) showed that the third-order polynomial model was significant in which pH and filtration time were identified as significant terms that influence BPA removal. The 3D response surface plots revealed the two-factor interaction between independent and dependent variables. The optimization process of the model predicted optimum conditions of 99.61% BPA removal at 1 bar, pH 6.7, 10 μg/L BPA concentration, and 10-min filtration time. The predicted optimum conditions for BPA removal were consistent with the obtained experimental values, indicating reliable application of historical data design RSM for modeling BPA removal in UF membrane system.