Effect of water quality on soil structure and infiltration under furrow irrigation

The quality of irrigation water has the potential to significantly affect soil structural properties, infiltration and irrigation application efficiency. While the effect of electrolyte concentration (as indicated by the electrical conductivity EC) and sodium adsorption ratio (SAR) have been studied under laboratory conditions, the effect on soil profile structural properties and irrigation performance have not been widely investigated under field conditions. In this paper, water with three different levels of sodium (SAR = 0.9, 10 and 30) was applied as alternative treatments to a clay loam soil. The application of 238–261 mm of medium- to high-SAR water was found to reduce aggregate stability, increase the bulk density of both the surface crust and underlying soil, and reduce the total depth of infiltration and final infiltration rate. Where low-SAR water was used, there was no significant (P<0.05) difference in final infiltration rate after the first four irrigations. However, where moderate- and high-SAR water was applied after the first four irrigations with the low EC-SAR water, the final infiltration rate was found to decrease on each of the successive irrigation events. For the moderate- and high-SAR treatments, this suggests that a steady-state equilibrium had not been reached within that part of the soil profile impeding infiltration. It is proposed that the initial reduction in infiltration is related to the physical processes of slaking leading to the development of an apedal, hardsetting surface soil layer. Similarly, it is proposed that the subsequent increase in bulk density and decline in infiltration where moderate and high EC-SAR water is applied is due to an increase in clay tactoid swelling reducing the size of the conducting micropores, dispersion blocking pores, and/or an increase in the thickness of the apedal surface layer. The reduction in infiltration associated with the use of high-SAR irrigation water was found to reduce the performance of the irrigations, with the application efficiency of the final irrigation decreasing from 40% where the low-SAR water was used, to 21% where the high-SAR water was applied. The implications for surface irrigating with water containing high sodium levels are discussed.Communicated by A. Kassam     

Effects of bicarbonate and different Fe sources on vegetative growth and physiological characteristics of bell pepper (Capsicum annuum L.) plants in hydroponic system

In order to determine the best iron (Fe) sources under alkaline conditions, an factorial experiment was conducted based on a completely randomized design with two factors of Fe fertilizer at four forms [iron sulfate (FeSO₄), Fe- ethylenediaminetetraacetic acid (EDTA), Fe- diethylenetriaminepentaacetic acid (DTPA) and Fe- ethylenediamine-N,N’-bis (EDDHA), and sodium bicarbonate (NaHCO₃)] at three levels (0, 10 and 15 mM) with three replications. Results showed that the highest loss of vegetative growth (stem length, leaf number, leaf area, stem diameter, and leaf, stem and root dry weight) and ecophysiological parameters (F_v/F_m, SPAD and RWC) was observed in plants treated with FeSO₄. Alkalinity stress increased proline concentration especially in FeSO₄ treatment. Bicarbonate treatments decreased Fe concentration in plant tissues. Fe-EDTA and Fe-DTPA fertilizer sources acted similar or even better than EDDHA at 10 mM NaHCO₃ concentration, but the best Fe fertilizer source was Fe-EDDHA at 15 mM NaHCO₃ concentration.     

海栖热袍菌极端耐热木聚糖酶B的提纯

克隆并在大肠杆菌中表达的海栖热袍菌的 xyn B基因 ,其表达产物木聚糖酶 B的 C 末端带有 6×His标签 ,研究了这种基因重组酶的提纯方法。通过对粗酶提取液的热变性处理 ,Ni NTA亲和柱层析和离子柱层析 ,最终得到了电泳纯的木聚糖酶 B,提纯倍数 4 4.4 ,得率 11。SDS PAGE法测定木聚糖酶 B的相对分子质量为 4 2 ku,与理论推算值 4 2 333u相吻合     

Multifunctional modification of wool fabric using graphene/TiO<Subscript>2</Subscript> nanocomposite

In this study, a new finishing technique is introduced through treatment of wool fabric with graphene/TiO₂ nanocomposite. Graphene oxide/titanium dioxide nanocomposite first applied on the wool fabric by hydrolysis of titanium isopropoxide in graphene oxide suspension and then this coating chemically converted by sodium hydrosulfite to graphene/TiO₂ nanocomposite. The homogenous distribution of the graphene/TiO₂ nanocomposite on the fiber surface was confirmed by field emission scanning electron microscopy (FE-SEM), Energy-dispersive X-ray spectroscopy (EDS) and X-ray mapping. X-ray diffraction patterns proved the presence of titanium dioxide nanoparticles with a crystal size of 127 Å on the treated wool fabric. Also, the defect analysis based on X-ray photoelectron spectroscopy (XPS) established the composition of the nanocomposite. Other characteristics of treated fabrics such as antibacterial activity, photo-catalytic self-cleaning, electrical resistivity, ultraviolet (UV) blocking activity and cytotoxicity were also assessed. The treated wool fabrics possess significant antibacterial activity and photo-catalytic self-cleaning property by degradation of methylene blue under sunlight irradiation. Moreover, this process has no negative effect on cytotoxicity of the treated fabric even reduces electrical resistivity and improves UV blocking activity.     

Weed control and wheat (Triticum aestivum L.) yield under application of 2,4-D plus carfentrazone-ethyl and florasulam plus flumetsulam: Evaluation of the efficacy

Three field experiments were conducted at the research fields of Plant Protection Research Institute, Iran, at different locations in 2004–2005 to study the efficacy of different broadleaved herbicides to control weeds in wheat. Treatments were the full-season hand weeded and weed-infested controls, and post-emergence applications of florasulam plus flumetsulam at 8.75, 10.50, and 12.25 g a.i./ha, 2,4-D plus carfentrazone-ethyl at 210, 245, 280, and 490 g a.i./ha, bromoxynil plus MCPA at 75, 100, and 150 g a.i./ha, 2,4-D at 560, 720, and 1120 g a.i./ha, tribenuron methyl, and 2,4-D plus MCPA. Herbicides were applied at wheat tillering stage. Naturally occurring broadleaved weed populations were used in experiments. Results indicated that bromoxynil plus MCPA at 150 g a.i./ha, 2,4-D plus MCPA, and 2,4-D plus carfentrazone-ethyl at 490 g a.i./ha were the best options to control weeds. Bromoxynil plus MCPA at 150 g a.i./ha and 2,4-D plus MCPA also resulted in the highest wheat yield. Overall, it could be concluded that rotational application of bromoxynil plus MCPA at 150 g a.i./ha, 2,4-D plus MCPA, and 2,4-D plus carfentrazone-ethyl at 490 g a.i./ha would be the best option to achieve satisfactory weed control, high grain yield and prevention of evolution of herbicide-resistant weeds.     

Effects of nanoclay and short nylon fiber on morphology and mechanical properties of nanocomposites based on NR/SBR

Natural rubber and styrene butadiene rubber (NR/SBR) reinforced with both short nylon fibers and nanoclay (Cloisite 15A) nanocomposites were prepared in an internal and a two roll-mill mixer by a three-step mixing process. The effects of fiber loading and different loading of nanoclay (1, 3 and 5 wt. %) were studied on the microstructure and mechanical properties of the nanocomposites. The adhesion between the fiber and the matrix was improved by the addition of a dry bonding system consisting of resorcinol, hexamethylene tetramine and hydrated silica (HRH). This silicate clay layers was used in place of hydrated silica in a HRH bonding system for SBR/NR-short nylon fiber composite. Nanoclay was also used as a reinforcing filler in the matrix-short fiber hybrid composite. The cure and scorch times of the composites decreased while cure rate increased when the short fiber and nanoclay were added. The mechanical properties of the composites showed improvement in both longitudinal and transverse directions with increasing short fiber and nanoclay content. The structure of the nanocomposites was characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM). X-ray diffraction results of nanocomposites indicated that the interlayer distance of silicate layers increased. The mechanical properties of nanocomposites (tensile, hardness and tear strength) are examined and the outcome of these results is discussed in this paper.     

Correction to: Improved model for studying hydrological process in the field-to-field irrigation system

Paddy and Water Environment -     

The correlation of genetic diversity and geographic distribution of Fusarium graminearum in North part of Iran

Fusarium Head Blight (FHB), caused mainly by Fusarium graminearum, is one of the most notorious diseases in North part of Iran. Due to lack of sufficient information regarding genetic diversity of FHB, the correlation between genetic diversity and geographic distribution of 52 isolates that collected from infected wheat kernels from four main grown region of North part of Iran were analyzed with 10 simple Sequence Repeat (SSR) primers and 15 Random Amplified Polymorphic DNA (RAPD) primers. The un-weighed pair group method using arithmetic means (UPGMA) was used and a dendrogram was constructed based on Jaccard's similarity coefficient. Principal Component Analysis (PCA) of SSR and RAPD markers revealed that the first two factors accounted for 51 and 41% of the total variance, respectively. SSR and RAPD data classified isolates into four and seven groups, respectively. SSR analysis showed that there was a correlation between genetic clusters of isolates and geographical origin in F. graminearum. However, results of cluster analysis using RAPD data didn't show any relation with geographical distribution but the results of this analysis confirmed a genetic variation among all isolates.     

Impact of ABCB1 Gene Polymorphisms and Smoking on the Susceptibility Risk of Chronic Myeloid Leukemia and Cytogenetic Response

Background:IM, a strong and selective TKI, has been approved as the front line of treatment in CML patients. In spite of satisfactory results of imatinib in the treatment of patients with CML, patients with treatment failure or suboptimal response developed resistance that might be because of pharmacogenetic variants. This study attempted to evaluate the influence of ABCB1 gene polymorphisms and smoking on CML risk and resistance to imatinib. Methods: ABCB1 (c.1236C>T, c.3435C>T) polymorphisms were genotyped in 98 CML patients and 100 sex- and age-matched healthy subjects by PCR-RFLP method, followed by sequencing. The patients were evaluated for cytogenetic response by the standard chromosome banding analysis in regular intervals. Results:Our results showed that c.1236CC genotype was significantly associated with imatinib resistance (OR = 3.94; p = 0.038). Analysis of the joint of SNP-smoking combination showed that smokers with c.1236TT/CT and c.1236CC genotypes had the increased risk of CML (OR = 6.04; p = 0.00 and OR = 4.95, p = 0.005) and treatment failure (OR = 5.36, p = 0.001 and OR = 15.7, p = 0.002), respectively. Smokers with c.3435TT/CT and c.3435CC genotypes also displayed the elevated risk of CML development (OR = 6.01, p = 0 and OR = 4.36, p = 0.011) and IM resistance (OR = 5.61, p = 0.001 and OR = 13.58, p = 0.002), respectively. Conclusion:Our findings suggest that c.1236CC genotype has clinical importance in the prediction of treatment outcome with IM, and smoking could have a synergistic role in CML risk and IM resistance. Key Words: ATP binding cassette transporter subfamily B, Imatinib mesylate, Smoking     

Surface modification and ternary system dye removal ability of manganese ferrite nanoparticle

In this paper, the surface of magnetic manganese ferrite nanoparticles (MFN) was modified using cetyl trimethylammonium bromide (CTAB). The modified MFN was studied using Fourier transform infrared spectroscopy (FTIR). The adsorption capacity of surface modified MFN (MFN-CTAB) was investigated for dye removal for single and ternary systems. Three anionic dyes, C.I. Direct Red 80 (DR80), C.I. Direct Red 31 (DR31), and C.I. Acid Blue 92 (AB92), were used as model compounds. The effects of operational parameters on dye removal (i.e. adsorbent dosage, dye concentration and salt) and the kinetic and isotherm of dye adsorption were studied. The adsorption kinetic for the dyes was found to be well described by the pseudo-second order model. The maximum dye adsorption capacity (Q ₀) of MFN-CTAB for DR80, DR31 and AB92 was 83 mg/g, 59 mg/g and 70 mg/g, respectively. The adsorption isotherm data were analyzed using the Langmuir, Freundlich, and Temkin equations. The results revealed that the Langmuir model fitted the adsorption data better. The results showed that the MFN-CTAB as a magnetic adsorbent might be a suitable alternative to remove dyes from colored aqueous solutions.