Guided bone regeneration with beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone membrane in partial defects of canine humerus

This study was performed to evaluate the effect of beta-tricalcium phosphate and poly L-lactide-co-glycolide-co-epsilon-caprolactone (TCP/PLGC) membrane in the repair of partial bone defects in canine proximal humerus. Three adult mixed-breed dogs were used during the experimental period. The length of the defect was quarter of the full length of humerus, and width of the defect was quarter of middle diameter of the lateral aspect of humerus. The humeri of each dog were divided into treatment (TCP/PLGC) and control groups. The defect was covered with TCP/PLGC membrane in treatment group. To evaluate regeneration of the bone, computerized tomography (CT) and histopathologic examination were performed. The radiopaque lines were appeared at the original defect sites in TCP/PLGC group but below the original site in control at 4th week. Radiopacity and thickness of the defect sites, and radiopaque lines were more increased at 8th week than those of 4th week. Histopathologic findings revealed fibrous connective tissue migration into the defect and the migration inhibited the structure of new cortex to be placed in the original level in control whereas new cortex growth was found in the level of original line in TCP/PLGC group. However, the new cortical bone in the TCP/PLGC group was thinner and less organized than the adjacent intact cortex, and the amount of new cancellous bones were also scanty. The result suggested that TCP/PLGC membrane is a good guided bone regeneration material to restore the original morphology of humerus in partial defect.     

水稻株行距配比的优化和株高密度模型的建立

为了探讨水稻高产栽培合理的株行距配比和栽插密度,在分析水稻株高与栽插密度关系的基础上,提出了确定水稻合理株行距配比的黄金分割优选法,即依赖于水稻株高（x,cm）的株行距配比为：行距（cm）=0.309 x,株距（cm）=0.191 x,建立了水稻株高密度（y,穴/m^2）的幂函数模型：y=169437x^-2（R^2=1）。应用该方法确定的目前生产上具代表性水稻品种的株行距和栽插密度,符合当前水稻高产栽培要求。     

Development and Characterization of Calcium-Alginate Beads of Apigenin: In Vitro Antitumor,Antibacterial, and Antioxidant Activities

The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity.     

Compressive deformation of wood impregnated with low molecular weight phenol formaldehyde (PF) resin II: effects of processing parameters

To obtain high-strength phenol formaldehyde (PF) resin-impregnated compressed wood at low pressing pressure, the effects of resin content, preheating temperature, pressing temperature, and pressing speed on the compressive deformation of oven-dried low molecular weight PF resin-impregnated wood was investigated. With an increase of PF resin content, the Youngs modulus of the cell wall perpendicular to the fiber direction decreases, and collapse-initiating pressure decreases linearly with the Youngs modulus. This indicates that the occurrence of cell wall collapse is strain-dependent. By increasing preheating temperatures, the collapse-initiating pressure increases due to the increment of the Youngs modulus of the cell wall. An increase in pressing temperature results in the thermal softening of the cell wall and causes collapse at a lower pressure. The wood is compressed effectively despite accelerated resin curing. The pressing speed significantly affects the viscoelastic deformation of the cell wall and the wood is well deformed with decreasing pressing speed, although the differences in density and mechanical properties are relatively small after a pressure-holding period of 30min. In all the parameters examined in this study, the Youngs modulus and bending strength increase with increasing density.     

Rooting behavior of rice cultivars under different planting methods

An experiment was carried out at the Agronomy Field Laboratory, Bangladesh Agricultural University (BAU), Mymensingh in Old Brahmaputra Alluvial Flood Plain (AEZ-9) during December 2005 to May 2006 to examine the root growth of different rice cultivars under various establishment methods. This experiment comprised two sets of treatment (i) three methods of planting viz., dry direct seeding, wet direct seeding and transplanting, and (ii) six rice cultivars, two inbreds viz., BRRI Dhan 28 and BRRI Dhan 29, two hybrids, viz., Aalok 6201 and Sonarbangla 1 and two local improved cultivar viz., Habigonj IV and Habigonj VIII. Cultivars had more remarkable effect on different root parameters i.e. number of roots, root length, root length density, root biomass, root weight ratio and root shoot ratio of hybrid, inbred and local improved rice cultivars than method of planting. BRRI Dhan 28 performed the best for most of the parameters. At harvest, BRRI Dhan 29 showed the best rooting behavior among the cultivars. For both stages hybrid rice cultivars showed intermediate and local improved cultivars performed lower in rooting behavior. Direct seeding method performed better than transplanting method for most of the root parameters but wet direct seeding and dry direct seeding methods were identical. Interaction effect between method of planting and cultivar in most of the root parameters were insignificant. But, BRRI Dhan 28 and BRRI Dhan 29 under wet direct seeding method and Sonarbanngla 1 under transplanting method showed the best rooting performance among the other combinations.     

Analysis of Land use and Land Cover Changes in the Coastal Area of Bangladesh using Landsat Imagery

Coastal land use across the globe has experienced remarkable rapid change over the recent decades because of extraordinary anthropogenic pressure and climate variability and change. Therefore, quantitative information about coastal land use change is imperative for effective management and planning resources for sustainable development. We analysed the quantitative land use and land cover changes during 1989–2000–2010 periods in three important agroecological zones of the most vulnerable coastal region of Bangladesh using Landsat images (Thematic Mapper/Enhanced Thematic Mapper Plus). In the Ganges Tidal Floodplain, the area under shrimp cultivation greatly increased at the rate of 2·05% per annum. The majority of the shrimp area gained from conversion of single cropland. In the Meghna Estuarine Floodplain, decreased mudflat and water bodies were observed, which was predominantly converted into cropland. In Chittagong Coastal Plain, salt pan–shrimp area increased with the expense of single and/or double cropland. In all the study areas, settlement area considerably increased over time. The dynamics of land use change have been attributed to low and unstable food production in the coastal region. The approach adopted in study and the results obtained from the study would likely be useful for policy making and identifying direction for future studies on the coastal land use in Bangladesh. Copyright © 2015 John Wiley & Sons, Ltd.     

Association Mapping of Quantitative Trait Loci for Grain Size in Introgression Line Derived from Oryza Rufipogon

Grain size is one of the critical agronomic traits governing grain yield and quality in rice. However, the underlying genetic mechanisms that control grain size in rice are poorly understood. We used an introgression line derived from Zhonghui 8015 and Oryza rufipogon Griff. This introgression line was evaluated under two different environmental conditions to dissect the quantitative trait loci controlling grain size. Genome-wide association study (GWAS) was performed using 28 193 SNPs through a general linear model, and 56 significant SNPs on different loci associated with the 4 grain size traits were detected. Cloned genes including GS3 and qGL3 showed substantial effects on grain length and size. Seven new stable loci were identified with pleiotropic effects on grain size. Haplotype, gene expression analyses, combined gene-based associations, and functional annotations permitted the shortlisting of important dominant genes including GS3 and qGL3.     

The incidence of canine haematozoa in peninsular Malaysia

In 3 urban areas in Selangor, Peninsular Malaysia between 1973 and 1981, blood from 4080 dogs was examined for haematozoa. The following frequencies were found: Babesia gibsoni 17.7%; microfilariae of Dirofilaria immitis 9.6%; Hepatozoon canis 1.2%; B. canis 1.1%; Ehrlichia canis 0.2%; Trypanosoma evansi 0.1%. A detailed examination of B. gibsoni infections and microfilariasis due to D. immitis with regards to monthly distribution, breed frequency, sex and age, revealed that pedigree and non-pedigree dogs were equally susceptible to Babesia and microfilariae infections.     

Antimicrobial activity of Securinega leucopyrus

Extracts of the leaves of Securinega leucopyrus exhibited a broad spectrum of antimicrobial activity.     

孟加拉涝原地区村林居住的宗教社团偏爱的乔木和灌木树种及使用的造林材料研究

2002年1月至6月对孟加拉涝原地区两个不同的宗教部落(印度教和穆斯林教)的传统家园森林进行了探索性研究，包括印度教和穆斯林教社团对树种(乔木和灌木)的偏爱度、类似性、造林材料及来源、植树地点和间距。研究发现Mangifera indica作为乔木树种，Ocimum sanctum作为灌木树种为印度教社团最喜爱的树种；Artocarpus heterophyllus和Lawsonia inermis分别为穆斯林社团最喜爱乔木树种和灌木树种。两中不同宗教社团选择乔木数种的相同性为86．57％，灌木树种为78．48％。两个宗教部落使用种子和苗木作为造林材料最多。乔木树种的造林材料主要来自家园(39％)灌木树种主要来自自然界(40％)。表3参27。