Phytochemical screening, cytotoxicity and antibacterial activities of two Bangladeshi medicinal plants

The objectives of the present study were to investigate phytochemical screening and to assay cytotoxicity and antibacterial activities of ethanolic extracts of leaves of two medicinal plants, Aglaonema hookerianum Schott (Family: Araceae) and Lannea grandis Engl. (Family: Anacardiaceae) available in Bangladesh. The brine shrimp lethality bioassay showed that the ethanolic extracts of Aglaonema hookerianum and Lannea grandis possessed cytotoxic activities with LC50 5.25 (microg mL(-1)) and 5.75 (microg mL(-1)) and LC90 10.47 (microg mL(-1)) and 9.55 (microg mL(-1)), respectively. Two extracts obtained from leaves were examined for their antibacterial activities against some gram positive bacteria such as Bacillus subtilis, Bacillus megaterium and Staphylococcus aureus, also gram negative strains of Pseudomonas aeruginosa, Escherichia coli, Shigella dysenteriae, Salmonella typhi, Salmonella paratyphi and Vibrio cholerae. Agar disc diffusion method was applied to observe the antibacterial efficacy of the extracts. Results indicated that both plant extracts (500 microg disc(-1)) displayed antibacterial activity against all of the tested microorganisms. These results were also compared with the zones of inhibition produced by commercially available standard antibiotic, Amoxicillin at concentration of 10 microg disc(-1). Observed antibacterial properties of the ethanolic extract of Aglaonema hookerianum Schott and Lannea grandis Engl. showed that both plants might be useful sources for the development of new potent antibacterial agents.     

水稻株行距配比的优化和株高密度模型的建立

为了探讨水稻高产栽培合理的株行距配比和栽插密度,在分析水稻株高与栽插密度关系的基础上,提出了确定水稻合理株行距配比的黄金分割优选法,即依赖于水稻株高（x,cm）的株行距配比为：行距（cm）=0.309 x,株距（cm）=0.191 x,建立了水稻株高密度（y,穴/m^2）的幂函数模型：y=169437x^-2（R^2=1）。应用该方法确定的目前生产上具代表性水稻品种的株行距和栽插密度,符合当前水稻高产栽培要求。     

Lodging-related morphological traits of hybrid rice in a tropical irrigated ecosystem

Hybrid rice (Oryza sativa L.) has been proven to be effective in increasing yield potential, but lodging often limits its yield in high-yielding environments. This study was conducted to determine genotypic variation in lodging resistance and lodging-related morphological traits among hybrid and non-hybrid check varieties, and to identify the key morphological traits associated with lodging resistance. Lodging behavior of 16 rice genotypes, including 12 hybrids and four inbreds, was studied at the International Rice Research Institute farm during the 2004 wet season (WS) and 2005 dry season (DS). Grain yield and visual score of lodging were determined at maturity. Lodging-related morphological traits were measured at 30 days after flowering. Large genotypic differences in lodging-related morphological traits were observed. Among these traits, dry weight per unit length, breaking resistance, and lodging index (bending moment/breaking resistance × 100) of lower internodes were significantly correlated with visual score of lodging. Several hybrids demonstrated high lodging resistance although their average plant height was over 120 cm. The lodging-related morphological traits and visual score of lodging in these hybrids were comparable with those of the non-hybrid check varieties with strong lodging resistance. These results suggest that increases in dry weight per unit length and breaking resistance of lower internodes are primary targets for reducing lodging index, thus improving overall lodging resistance of hybrid rice in a breeding program.     

Management strategies for forage rape (Brassica napus L. cv Goliath): Impact on dry-matter yield,plant reserves,morphology and nutritive value

Limited information is available on the grazing management principles of forage rape (Brassica napus L.), particularly in relation to grazing height and intensity and the impact of these on dry-matter (DM) yield and nutritive value. A glasshouse study was undertaken to investigate the effect of three defoliation heights (plant height at harvest; DH: 40, 70 and 90 cm; L, M and H DH respectively) and three defoliation intensities (height at which plants were cut; DI: 5, 20 and 35 cm of residual height; H, M and L DI respectively) on forage rape (cv Goliath) yield and nutritive value at two harvests (harvest 1, H1 and harvest 2, H2), and the impact of nitrogen (N) and water soluble carbohydrate (WSC) reserves on regrowth. Increasing DH from L to H increased estimated total DM yield (H1 plus H2) from 0.5 to 4.6 t DM/ha but DI did not affect yield. Dry-matter yield was optimized at 90 cm DH, but greater nutritive value was achieved by harvesting at lower levels of DH. Despite high in vitro DM digestibility (IVDMD; 852–889 g/kg), harvesting at 90 cm DH could not meet the protein requirement of lactating dairy cows and harvesting at lower levels risks nitrate poisoning. Our results indicate the optimum DH may be between 70 and 90 cm DH, and 20 and 35 cm DI, which requires further studies.     

Development and testing of a surface roughness measurement device based on aerial ultrasonic reflections

Paddy and Water Environment - Repairs of concrete irrigation channels in Japan are guided to a large extent by the degree to which their walls have degraded over decades of use. Current methods of...     

Association Mapping of Quantitative Trait Loci for Grain Size in Introgression Line Derived from Oryza Rufipogon

Grain size is one of the critical agronomic traits governing grain yield and quality in rice. However, the underlying genetic mechanisms that control grain size in rice are poorly understood. We used an introgression line derived from Zhonghui 8015 and Oryza rufipogon Griff. This introgression line was evaluated under two different environmental conditions to dissect the quantitative trait loci controlling grain size. Genome-wide association study (GWAS) was performed using 28 193 SNPs through a general linear model, and 56 significant SNPs on different loci associated with the 4 grain size traits were detected. Cloned genes including GS3 and qGL3 showed substantial effects on grain length and size. Seven new stable loci were identified with pleiotropic effects on grain size. Haplotype, gene expression analyses, combined gene-based associations, and functional annotations permitted the shortlisting of important dominant genes including GS3 and qGL3.     

Preparation and characterizations of polypyrrole on liquid ammonia pre-treated wool fabric

Wool fabric was treated with liquid ammonia at -40 °C for 30 and 60 s prior to the application of polypyrrole (PPy). The polymer was deposited on wool fiber using the chemical oxidation method with 0.02 and 0.05 mol/l (Py) monomer concentration and FeCl₃ as a catalyst. Functional groups of wool samples were analyzed using FT-IR, and surface morphology was investigated using SEM micrographs. Properties such as water absorbency, surface resistivity, abrasion resistance, weight add-on, and air permeability of coated specimens were explored. The FT-IR outcomes revealed the liquid ammonia pre-treatment changed the amount of amide I (NH), cystic acid, cystic monoxide, and dioxide content of the fiber. SEM micrographs revealed the descaling of wool surface after pre-treatment and smooth coating of polymer. Pre-treatment of wool in liquid ammonia improved absorbency of wool fabric with respect to the treatment duration. The surface resistivity of wool fabric decreased with the increase of monomer concentration and pre-treatment duration. The results of abrasion resistance confirmed that the pre-treated fabric exhibited lower loss of polymer after 200 cycles of abrasion. The weight of the fabric was increased and air permeability decreased when the monomer concentration and liquid ammonia pre-treatment duration was increased.     

Characterization of oil palm empty fruit bunch and glass fibre reinforced recycled polypropylene hybrid composites

The effects of hybridization of glass fibre on oil palm empty fruit bunch (EFB) and recycled polypropylene-based composites are described in this paper. The compounding process involved extrusion followed by injection moulding technique to prepare the samples for characterizations. Fibre loading were considered as 40 % of the total weight of the blends and EFB:glass fibre ratio was maintained as 30:70, 50:50, 70:30 and 90:10. Two types of coupling agents of maleic anhydride-grafted polypropylene such as polybond-3200 and fusabond P-613 of different molecular weight and maleic anhydride level were used to improve the interfacial adhesion between the fibres and the matrix. Composites were characterized by density, melt flow index, tensile, Izod impact and flexural testing. Morphological images of the fractured surfaces of the composites were examined by field-emission scanning electron microscopy. Samples were also characterized by thermal tests such as thermogravimetric analysis and differential scanning calorimetry to evaluate the thermal and crystalline properties, respectively. Optimization of hybridization of the fibres and effect of coupling agents were evaluated in terms of various properties of the samples. The composite prepared with EFB:glass fibre ratio of 70:30 showed better reinforcing properties than that of others.     

Development and Characterization of Calcium-Alginate Beads of Apigenin: In Vitro Antitumor,Antibacterial, and Antioxidant Activities

The objective of this work was to develop sustained-release Ca-alginate beads of apigenin using sodium alginate, a natural polysaccharide. Six batches were prepared by applying the ionotropic gelation technique, wherein calcium chloride was used as a crosslinking agent. The beads were evaluated for particle size, drug loading, percentage yield, and in vitro drug release. Particle size was found to decrease, and drug entrapment efficiency was enhanced with an increase in the polymer concentration. The dissolution study showed sustained drug release from the apigenin-loaded alginate beads with an increase in the polymer proportion. Based on the dissolution profiles, BD6 formulation was optimized and characterized for FTIR, DSC, XRD, and SEM, results of which indicated successful development of apigenin-loaded Ca alginate beads. MTT assay demonstrated a potential anticancer effect against the breast cancer MCF-7 cell lines. The antimicrobial activity exhibited effective inhibition in the bacterial and fungal growth rate. The DPPH measurement revealed that the formulation had substantial antioxidant activity, with EC50 value slightly lowered compared to pure apigenin. A stability study demonstrated that the BD6 was stable with similar (f2) drug release profiles in harsh condition. In conclusion, alginate-based beads could be used for sustaining the drug release of poorly water-soluble apigenin while also improving in vitro antitumor, antimicrobial, and antioxidant activity.     

Premelting at defects within bulk colloidal crystals

Premelting is the localized loss of crystalline order at surfaces and defects at temperatures below the bulk melting transition. It can be thought of as the nucleation of the melting process. Premelting has been observed at the surfaces of crystals but not within. We report observations of premelting at grain boundaries and dislocations within bulk colloidal crystals using real-time video microscopy. The crystals are equilibrium close-packed, three-dimensional colloidal structures made from thermally responsive microgel spheres. Particle tracking reveals increased disorder in crystalline regions bordering defects, the amount of which depends on the type of defect, distance from the defect, and particle volume fraction. Our observations suggest that interfacial free energy is the crucial parameter for premelting in colloidal and atomic-scale crystals.