Classifying tree species in a northern mixed forest using high-resolution IKONOS data

The high-spatial-resolution IKONOS satellite is now operating as a resource and disaster monitor, after a successful launch in September 1999. The ground resolution of the IKONOS panchromatic band is about 1m, the greatest of any satellite. The objectives of this study were to verify the extent to which high-resolution IKONOS data can be used to classify tree species. A field survey and image analysis study used IKONOS imagery to classify 21 species in mixed stands of deciduous and conifer species with the following results: (1) The panchromatic and multi-spectral bands 4, 3, and 2 were useful for classifying tree species owing to the great difference in the reflectance values between tree species. (2) Some groups, for which there were significant differences among species, were identified using Tukeys multiple comparison test; conifers and some broadleaved trees were identified correctly more often than other species. (3) A random selection of validation pixels showed that the overall classification accuracy was 62%. The classification accuracy of broadleaved trees was a little low, ranging from 40% to 63%, while that of conifers exceeded 70%. (4) The overall accuracy of the classification at the genus level improved by 4% more than the species level. The misclassification of broadleaved trees was due to the similar spectral characteristics of species in the same genus.     

Spatial variation in tree seedling density after the site preparation for planting in a cleared coniferous plantation in Hokkaido,northern Japan

To study spatial variation in natural tree seedling density and the relationship between variation in seedling density and seed dispersal mode at a cleared site, we surveyed natural tree seedlings after the site preparation for planting in a coniferous plantation cleared by a typhoon disturbance in 2004. The site was located near Sikotsuko Lake, Hokkaido, northern Japan. Twenty-five tree seedling species were found and the mean seedling density was 9.8 seedlings/m². Seedlings of non-animal-dispersed species (7.2 seedlings/m²) were approximately five times more abundant than those of animal-dispersed species (1.4 seedlings/m²), and 87% of all seedlings were current. The seedling density of non-animal-dispersed species (almost all wind-dispersed) decreased with distance from a natural forest; however, this trend did not hold for animal-dispersed species (almost all bird-dispersed). The spatial variation in seedling density was lower in animal-dispersed species than in non-animal-dispersed species. Seed dispersal patterns and the viability duration of buried seeds likely affected the variation in seedling density by seed dispersal mode.     

Negative gravitropism and growth stress in GA3-treated branches ofPrunus spachiana Kitamura f.spachiana cv.Plenarosea

One of the roles of growth stress in branch shape formation was investigated using a weeping-type Japanese cherry,Prunus spachiana. Negative released strains, caused by longitudinal tensile growth stresses, were detected in the upper side of gibberellin A₃-treated (GA₃-treated) and control branches. The mean value of the released strain in the upper side of the treated branches was –0.104%, which was larger than the value (–0.067%) observed in the control branches. Both branches formed tension wood in the upper side of the xylem, and the treated branches formed tension wood near the pith as well. This suggested that the treated branches generated larger tensile growth stress from the early growth stages. The successive generation of growth stress from the early growth stages was considered to generate forces large enough to bend the branch upward.     

Investigation of change in tangential strain on the inner bark of the stem and root ofBetula platyphylla var.japonica andAcer mono during sap season

Although it is well known that sap exudation during early spring in temperate deciduous trees occurs in response to daytime warming and nighttime cooling, the mechanisms of the process are not yet fully understood. Previous theories suggested that changes in stress in the wood caused by daytime heating and nighttime cooling might be linked with sap flow. Consequently, a study of itaya-kaede maple (Aver mono) and shirakamba birch (Betula platyphylla var.japonica) looked at tangential strains. One-hour intervals for 3 years of the tangential strains on the inner bark of stem and root were measured in itaya-kaede maple and shirakamba birch during the sap exudation season. The measurements indicated different mechanisms of sap exudation in these two trees. During the sap exudation season in late March, when the temperature fluctuated around 0°C, the tangential strain in the root of itaya-kaede maple showed expansion in the daytime and contraction at night. Conversely, in early April the tangential strain in the root of shirakamba birch exhibited contraction in the daytime and expansion at night. The changes in tangential strains in itaya-kaede maple were attributed to conditioning, a known concept used to explain the uptake mechanism of soil water in maple and its exudation during early spring. However, because the change in tangential strain in the roots of shirakamba birch was similar to that found during the rampant season, sap exudation was not attributed to conditioning but to the plentiful supply of water from the roots. The implications of these mechanisms are that different sap harvesting techniques may be appropriate for different tree species.     

Stand Density Control Diagrams for Scots pine and Austrian black pine plantations in Bulgaria

Stand Density Control Diagram (SDCD) is a stand-level mathematical model, which describes the relationships between yield, density and mortality throughout all stages of stand development. The SDCD is primarily used to derive density control schedules by management objectives. The main objectives of the present study are to define a modified model of SDCD for application to Scots pine (Pinus sylvestris L.) and Austrian black pine (Pinus nigra Arn.) plantations in Bulgaria, to examine the fitness of the model with representative experimental data sets from plantations of both species and to present a way of direct application of the SDCDs for practical purposes. The constructed SDCDs characterize the spatial-temporal dynamics of the pine plantations in a broad range of densities, forest sites and growth stages from 4 to 26 (28) m of dominant height class. The full density lines were fixed with self-thinning exponents α = 1.69 and α = 1.75 for Scots pine and Austrian black pine, respectively, and the trajectories of natural thinning for 23 initial densities (444-40000/ha) were determined. A direct way for application of the SDCDs to the plantation management was designed to estimate the optimal initial densities for the maximum attainable final yield and large-size wood production by self-thinning stands.     

Physical and mechanical properties of wood after moisture conditioning

Some properties of wood (hinoki:Chamaecyparis obtusa) moisture-conditioned by an adsorption process from a dry state and by two desorption processes (from a water-saturated state and from a state with a moisture content slightly below the fiber saturation point) were investigated. The moisture contents of wood conditioned by the adsorption process and by the desorption process continued to approach to one another for the moisture-conditioning period of over 50 weeks. Accordingly, sorption hysteresis should be regarded as a transitional phenomenon that occurs during the process of approaching the true equilibrium, which requires a long time. The wood conditioned by the desorption process beginning from a water-saturated state showed slightly smaller dimensions than those conditioned by the adsorption process with the same moisture content; however, the wood conditioned by the desorption process from a moisture content below the fiber saturation point showed slightly larger dimensions than those conditioned by the adsorption process. The wood conditioned by the adsorption process from a dry state showed a higher modulus of elasticity and modulus of rupture than did the wood conditioned from a water-saturated state with the same moisture content. The mechanical properties of the wood also varied based on the states at which the desorption process was started. This is a notable characteristic of the relation between the drying condition and the mechanical properties of wood.     

Effect of the lateral growth rate on wood properties in fast-growing hardwood species

We investigated the feasibility of using several fast-growing tropical or subtropical hardwood species for timber production by measuring key wood qualities in relationship to the high rates of lateral growth. The trees tested were sampled from even-aged plantations of Acacia mangium, A. auriculiformis, hybrid Acacia (A. mangium × A. auriculiformis), Eucalyptus grandis, E. globulus, and Paraserianthes falcataria (Solomon and Java origin) that had already reached commercial harvesting age. The released strain of the surface growth stress (RS), xylem density (XD), microfibril angle (MFA), and fiber length (FL) were measured at the outermost part of the xylem at breast height in each tree. Results were then compared to the lateral growth rate (radius/age) at breast height, which provides a relative indicator of the amount of tree growth per year. Our findings indicated that RS was constant, regardless of lateral growth rate in each species. Similar results were observed for XD, MFA, and FL, with a few exceptions, suggesting that high growth rates do not intrinsically affect the wood properties of fast-growing tropical or subtropical species that have reached harvesting age. However, special attention must be paid to patterns of xylem maturation when developing plantations of such species.     

In situ measurement of tensile elastic moduli of individual component polymers with a 3D assembly mode in wood cell walls

We attempted to measure in situ the tensile elastic moduli of individual component polymers with a three-dimensional (3D) assembly mode in the cell walls of Sugi (Cryptomeria japonica D. Don) without isolating the polymers. To prepare wood tangential slices [50 × 6 × 0.2 mm (L × T × R)] consisting of lignin with a 3D assembly mode in the cell walls, cellulose and hemicellulose were removed using the method of Terashima and Yoshida (2006) to obtain methylated periodate lignin slices. To prepare wood slices consisting of polysaccharide with a 3D assembly mode in the cell walls, lignin was removed using the method of Maekawa and Koshijima (1983) to obtain holocellulose slices. Static tensile test was applied to determine the elastic moduli of 3D lignin and 3D polysaccharide slices. The followings were revealed. The elastic modulus of the 3D lignin slices was 2.8 GPa, regardless of the microfibril angle (MFA) in the slices. The elastic moduli of the 3D polysaccharide slices with MFAs of 14°, 23°, 34°, and 42° were 18, 12, 9, and 4 GPa, respectively. The former shows that the lignin with a 3D assembly mode behaves as an isotropic substance in the cell walls, while the latter suggests that the 3D polysaccharide slice shows marked anisotropic structure in the cell wall. Despite the fact that cellulose content increased after lignin removal, values of substantial elastic modulus of the cell wall slightly decreased regardless of MFA. Following two possible reasons were pointed out for explaining this phenomenon. First, lignin removal caused an artifactual deterioration in the polysaccharide slices at the level of macromolecular aggregate. Second, rigid and fusiform-shaped cellulose crystallites are dispersed in the soft matrix of amorphous polysaccharide, and those are loosely connected to each other by the intermediary of matrix polysaccharide. Those suggest that the rigid cellulose crystallite can optimize its strong mechanical performance in the polysaccharide framework of the wood cell wall in combination with the ligninification.     

A surge-like increase in luteinizing hormone preceding musth in a captive bull African elephant (Loxodonta africana)

This study was conducted to determine the correlation between reproductive hormones and musth in a male African elephant. Changes in circulating luteinizing hormone (LH), follicle stimulating hormone (FSH), testosterone and immunoreactive (ir-) inhibin and the degree of musth were evaluated for 4 years. LH increased 4 weeks before musth began. The highest concentrations of testosterone and ir-inhibin were observed from April to October. There were positive correlations among testosterone, ir-inhibin and musth behavior. These findings suggested that the surge-like LH in the pre-musth period might stimulate secretion of testosterone and ir-inhibin and thus initiate the musth behavior. This study also suggested that the high LH level before musth might be a useful biomarker for the beginning of the musth season.