Heavy metal distribution and electrical conductivity measurements in biosolid pellets

Purpose

Contamination of soils by potentially toxic elements (e.g. Cd, Ni, Cr, Pb) from amendments of biosolids is subject to strict controls within the European Union. Today, the use of biosolids to improve the nutrient content in a soil is a common practice. The present research was conducted to determine electrical conductivity in biosolid pellets (dry wastes) using an innovative methodology. On the other hand, the present study was designed to examine the partition of selected heavy metals in biosolid pellets and also to relate the distribution patterns of these metals.

Materials and methods

In this context, heavy metal concentrations were studied in biosolid pellets under different pressures. Electrical conductivity measurements were taken in biosolid pellets under pressures on the order of 50 to 150 MPa and with currents of 10^?15 A. Measurements of electrical conductivity and heavy metal content for different areas (H1, H2, and H3) were taken. Total content of metals was determined following microwave digestion and analysed by inductively coupled plasma mass spectrometry (ICP/MS). Triplicate portions were weighed in polycarbonate centrifuge tubes and sequentially extracted.

Results and discussion

The distribution of chemical forms of Cd, Ni, Cr, and Pb in the biosolids was studied using a sequential extraction procedure that fractionates the metal into soluble-exchangeable, specifically sorbed-carbonate-bound, oxidizable, reducible, and residual forms. The residual, reducible, and carbonate-sorbed forms were dominant. Higher Cr and Ni content were detected in pellets made with biosolids from the H3 horizon. The highest Cd and Ni values were detected in the H2 horizon.

Conclusions

The trends of the conductivity curves were similar for the sludge from the isolation surface horizon (H1) and for the horizon in the mesophilous area (H2). In the case of the horizon in the thermophilous area (H3), the electrical conductivity showed extremely high values. This behaviour was similar in the case of the Cr and Ni content. However, in the case of Cd and Pb, the highest values were detected in the H2 horizon. This experiment could be useful for establishing a general rule for taking measurements of electrical conductivity and heavy metals in biosolid pellets and other types of dry wastes.

     

Inorganic Parameters as Water Quality Indicators in Acidic Groundwater in a Tropical Region – Brasilia-DF (Brazil)

In Brazilian Tropical Cerrado Region, reactions related to parental-material breakdown and oxisols genesis strongly affect the groundwater chemical characteristics. These reactions are responsible for the low water pH values, the soil charge balance, and the re-equilibrium of dissolved inorganic carbon species. Brasilia, the capital of Brazil, lies in the Distrito Federal, in the central part of the Brazilian Cerrado Region and has been experiencing an intense urban development during the last 15 years. Many town-house complexes have been built without proper water supply or wastewater disposal conditions. In this work, we discuss the adequacy of traditional ground waters geochemical classification models applied to the most exploited aquifers in DF. Forty groundwater samples were collected and pH, conductivity and total dissolved solids were determined in the field. Na, K, Ca, Mg, Fe, Al, Cu, Cd, Cr Mn e Zn were determined by Inductively Coupled Plasma Atomic Emission Spectrometry and Atomic Absorption Spectrophotometry. We identify inorganic indicators of human interference on the quality of these waters and also suggest a new mean of interpretation of dissolved inorganic elements based on statistic treatment of multivariate data. It is revealed a particular geochemical feature concerning to the alkali and the earth alkali metals concentrations, and a typical trace-element behaviour, closely related to the human activities and to the geological-bearing material characteristics. For all of the samples supposed to be altered by any kind of human activity, the physico-chemical parameters were lower than the standards established by the water quality legal system.     

Influence of cultivar and germination on bioactive amines in soybeans (Glycine max L. Merril)

The levels of amines in soybeans as affected by cultivar in two consecutive years and by germination were investigated. Spermidine, spermine, putrescine, agmatine, and cadaverine were detected, whereas tyramine, histamine, tryptamine, serotonine, and phenylethylamine were not. Spermidine was the predominant amine followed by spermine. High concentrations of these amines confirmed soybean as a rich source. Cadaverine was confirmed to be inherent to soybean. The percent contribution of spermidine and spermine to total levels was not affected by cultivar in either years. However, amine levels were affected by cultivars in different ways in the consecutive years. Cadaverine was affected more by the cultivar, whereas spermidine, spermine, and agmatine were affected by harvest year. During germination the levels of amines from soybean increased significantly, except for agmatine. Spermidine and spermine accumulated in the cotyledon, whereas cadaverine and putrescine accumulated in the radicle and hypocotyl.     

Influence of cultivar on quality parameters and chemical composition of strawberry fruits grown in Brazil

Six strawberry cultivars grown on the same commercial plantation in Brazil were evaluated for their chemical composition and quality attributes at the ripe stage. The profiles of the main soluble sugars, ascorbic acid, and anthocyanins were also obtained during the developmental stages. Results showed significant differences among cultivars in all of the investigated parameters. Cv. Campineiro showed an average value for texture of 0.63 N, half the value found for cv. Oso Grande. Anthocyanin content ranged from 13 (cv. Campineiro) to 55 (cv. Mazi) mg/100 g. Total ascorbic acid found for cv. Campineiro (85 mg/100 g) was twice the amount found in cv. Dover (40 mg/100 g). Fructose was the predominant soluble sugar in almost all cultivars. The proportion among the main soluble sugars (fructose, sucrose, and glucose) was similar for Oso Grande and Toyonoka cultivars. The flavonol content (quercetin plus kaempferol derivatives) ranged from 2.7 to 7.1 mg/100 g, with a mean value of 6.1 mg/100 g, whereas free ellagic acid ranged from 0.9 to 1.9 and total phenolics varied from 159 to 289 (mean 221) mg/100 g.     

Application of wood ash compared with fertigation for improving the nutritional status and fruit production of kiwi vines

Application of wood ash can potentially improve the fertility of acid soils and the nutritional status of crops. However, there is limited information about the effectiveness of this practice with fruit trees. The application of wood ash as a fertilizer in a kiwifruit plantation—both with and without fertigation/irrigation—was compared with that of a conventional fertigation program in a completely randomized field experiment on an acid soil in northwest (NW) Spain. The effects on plant nutritional status and on fruit yield, as well as environmental effects, were evaluated over a period of 2 y. The application of wood ash led to modest increases in soil pH and extractable nutrients (phosphorus, P; calcium, Ca; magnesium, Mg; potassium, K; boron, B). However, no consistent effects in foliar nutrient concentrations were found. Ash application led to an increase of up to 45% in the number of fruits produced, which was mainly attributed to the inputs of Ca and Mg. Although moderate increases in soil available manganese (Mn) and nickel (Ni) after ash application were recorded, there were no changes in heavy‐metal concentrations in leaves or fruits. From the results of the study it can be concluded that wood ash can be used to improve the growth conditions of kiwi vines on acidic soils. Wood ash should be applied at rates adapted to the liming needs of the soil, while also taking into account the chemical composition of the ash.     

Extended Burr XII Regression Models: Theory and Applications

We introduce two new lifetime distributions by compounding the Burr XII (BXII) and geometric distributions. We derive their moments and moment-generating and quantile functions. We also define two new extended regression models based on the logarithms of these distributions. The regression models are very useful in the analysis of real data since they can provide better fits than other special regression models. We formulate a new cure rate survival model, where the number of competing causes of the event of interest follows a geometric distribution and the time to this event has the BXII geometric distribution. The estimation of the model parameters is performed by maximum likelihood. We illustrate the importance of the new models by means of two real datasets. The first dataset comes from a study carried out at the Department of Entomology of the Luiz de Queiroz School of Agriculture, University of São Paulo, which aims to assess the longevity of the Mediterranean fruit fly (ceratitis capitata). The second dataset comes from the area of biology.     

Viability of mass algal cultures preserved by freezing and freeze-drying

The microalgae Chaetoceros sp. and Phaeodactylum tricornutum were grown in semicontinuous 15 1 cultures, a volume commonly used for mid-scale inocula in aquacultural practices. The daily yields were concentrated and stored by freezing and freeze-drying for up to 1 month. After slow or fast freezing without the protective agents glycerol or Me₂SO, neither of the microalgae was capable of active growth, while with the cryoprotectants slow freezing gave good results after 7 days of storage at −20°C. After 15 and 30 days, however, microalgae growth was poor, probably due to bacterial contamination. Freeze-drying gave even worse results, which we attribute to severe losses of storage products after this treatment.     

Tracing trophic pathways through the marine ecosystem of Rapa Nui (Easter Island)

1. The structure of food webs provides important insight into biodiversity, organic matter (OM) pathways, and ecosystem functioning.
2. Stable isotope analysis (δ¹³C and δ¹⁵N) was used to characterize the trophic structure and the main OM pathways supporting food webs in the Rapa Nui coastal marine ecosystem.
3. The trophic position of consumers and isotopic niche metrics were estimated for different assemblages (i.e. mesozooplankton, emergent zooplankton, reef invertebrates, reef fishes, pelagic fishes, and seabirds). Furthermore, the relative importance of different OM sources (i.e. macroalgae, zooxanthellate corals, and particulate OM [POM]) was assessed for heterotrophic consumers using Bayesian mixing model (MixSIAR).
4. Results show a clear pattern of ¹³C and ¹⁵N enrichment from small-sized pelagic and benthic invertebrates, to reef and pelagic fishes, and seabirds. Most invertebrates were classified as primary consumers, reef fishes as secondary consumers and pelagic predators and seabirds as tertiary and quaternary consumers.
5. Isotopic niche metrics indicate a low trophic diversity for pelagic assemblages (mesozooplankton and pelagic fishes), in contrast to reef fauna (invertebrates and fishes), whose higher trophic diversity suggest the exploitation of a wider range of trophic resources. Overlapping of standard ellipses areas between reef invertebrates and reef fishes indicates that both assemblages could be sharing trophic resources.
6. Mixing models results indicate that POM is the main trophic pathway for mesozooplankton, macroalgae (Rhodophyta) for emergent zooplankton, and a mix of coral-derived OM and Rhodophyta for coral reef assemblages such as macrobenthos and reef invertebrates. In contrast, POM contribution was notably more important for some pelagic fishes and seabirds from upper trophic levels.
7. This study provides key elements for conservation efforts on coral reefs, management planning and full-implementation of the recently created Rapa Nui Multiple Use Marine Protected Area.