Cooperation in private forestry of post-soviet system: Forest owners’ cooperatives in Lithuania

The current state of cooperation in private forestry in Lithuania is examined, with a focus on the analysis of objectives, organisational structure and the ways forest owners’ cooperatives operate. A postal survey has been used as a main research instrument, the questionnaire consisting of a series of multiplechoice close-ended questions. This paper provides insights into the state forest enterprises and other private companies operating in the private forestry sector, and places forest owners’ cooperatives in a broader context of the private forestry sector. A typical forest owner’s cooperative in Lithuania has up to 10 members and about 20 clients to whom services are provided. The leaders of cooperatives indicate that the optimal number of clients using their services should not exceed 40. The main stated objectives of cooperatives are the provision of services to their members under the most attractive conditions, uniting members, and earning a profit for the members. These activities of cooperatives revolve around timber harvesting and trade. It is concluded that the process of cooperation of private forest owners in Lithuania is rather slow, although positive development can be observed.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Three-dimensional imaging of a sawn surface: a comparison of confocal microscopy,scanning electron microscopy,and light microscopy combined with serial sectioning

The three-dimensional structure of a transverse sawn wood surface was investigated using several methods, to compare techniques, and to study the types of deformation in tracheids at the saw cut. A sample of spruce sapwood was cut with a fret saw across the grain. The transverse sawn surface was imaged by confocal microscopy, field emission scanning electron microscopy (FESEM), and by light microscopy combined with serial sectioning and three-dimensional (3D) reconstruction. Both confocal microscopy and FESEM were restricted to visualising the cut surface of the wood. However, serial sectioning was able to reveal the internal structure below the cut surface providing more information on the types of cell deformation present. The wood structure was deformed to depths of more than 600 μm below the surface with twisting, crushing and tearing deformations. Near the outer surface, gaps were formed between groups of tracheids where the cell walls had been torn away to form saw dust. The deformation tended to form groups of tracheids that were twisted relative to each other. Latewood was less distorted, forming a dense solid surface compared to the highly fibrous earlywood.     

Load behaviors of a prefabricated wood framing house during lifting and transportation

Lifting for handling and flatbed truck transportation to the job site are important processes during manufacture of prefabri-cated wooden construction units like mini homes and building modules. Significant damage can occur to sections or components of units during these operations. Although damage usually will not impair its structural safety, it is costly to fix and causes the public to perceive prefabricated wooden buildings as low quality products. Field observations and preliminary numerical models for prefabri-cated units subject to lifting and transportation forces are summarized here. Once fully developed and verified, models will support the creation of damage mitigation strategies centered on structural details indicating how units are to be supported during lifting and transportation.     

Effects of disturbance on regeneration of Abies fabri forests at the upper reaches of the Yangtze River

Mudflow is the principal disturbance in Abies fabri forests. In the Gongga Mountain areas of the upper reaches of the Yangtze River, the intensities and periodicity of different scale mudflows vary. Small-scale mudflows are more frequent, occurring every one or two years while large-scale mudflows may occur once in more than one hundred years. Through a field study of A. fabri forests during different stages of growth, we analyzed their structural characteristics and discovered that after different sizes of mud-flow, poplar and birch often occupy the dominant canopy at the expense of the slow growing A. fabri, for only a small number of saplings are A. fabri that occurs in the first regeneration stage. However, a large number of seed resources can be found in mature A. fabri forests and as a unique regeneration species, A. fabri will gradually replace all the other species and form a stable community of strong shade-tolerant trees. Because of the intimate relationship between growing conditions and soil and water conservation at the upper reaches of the Yangtze River, we should carry out some artificial measurements to control and promote the slow regeneration process of A. fabri.     

On mechanical behavior of traditional timber shear wall in Taiwan I: background and theory derivation

The objectives of this study were to explore the mechanical behavior of traditional timber shear walls in Taiwan and to propose a theoretical model to predict their lateral force resistance. An extensive field investigation was conducted, and the dimensions, tectonic detail, and materials used were recorded. The data collected were used as the reference for theoretical derivation and experimental design. In the theoretical model, the moment resistance of entire shear walls was derived from the contributions of the moment-resisting capacity supplied not only by embedment and friction action between board units and beams but also the dowel action of bamboo nails. Timber shear walls with various geometric conditions and material properties are considered. The theoretical model demonstrated in this study can be used to predict the mechanical behavior of timber shear walls and will be verified by experiments in our next article.     

Assemblages of wood-inhabiting fungi related to silvicultural management intensity in beech forests in southern Germany

Current silvicultural treatments in beech forests are aimed at achieving thick logs without discoloured hardwood. Therefore intensive thinning is applied already in younger stands with the objective of large-sized trunks at an age of 100 years. However, this approach bears the risk that dead wood structures and broken trees are completely removed from the forest. The impact of three different silvicultural management intensity levels on wood-inhabiting fungi over decades was investigated in a large beech forest (>10,000 ha) in southern Germany in 69 sampling plots: A Intensive Thinning and Logging with high-value trees, B Conservation-Oriented Logging with integration of special structures such as dead wood and broken trees and C Strict Forest Reserves with no logging for 30 years. The analysis of community showed marked differences in the fungus species composition of the three treatments, independent of stand age. The relative frequencies of species between treatments were statistically different. Indicator species for naturalness were more abundant at sites with low silvicultural management intensity. Fomes fomentarius, the most common fungus in virgin forests and strict forest reserves, is almost missing in forests with high-management intensity. The species richness seemed to be lower where intensive thinning was applied (P = 0.051). Species characteristic for coarse woody debris were associated to low management intensity, whereas species with a significant preference for stumps became more frequent with increasing management intensity. A total amount of dead wood higher than 60 m³/ha was found to enable significantly higher numbers of species indicators of naturalness (P = 0.013). In conclusion, when applying intensive silvicultural treatment, the role of dead wood needs to be actively considered in order to maintain the natural biocoenosis of beech forests.     

Analysis of the forest fires in the Antalya region of Turkey using the Keetch–Byram drought index

We investigated the correlation of large fires([300 ha) from 1992 to 2013 within the borders of the Antalya Regional Directorate of Forestry using the Keetch–Byram drought index(KBDI). Daily KBDI values were calculated for each year, and values for the period before the year 2000 differed significantly from those after2000. After 2000(large fires occurred in 2004, 2006, 2007,2008, 2010, and 2013), when KBDI values increased, the KBDI, but not the number of fires, was inversely correlated with the natural log of the burned area(NLBA). While there were both high and low KBDI values when the NLBA was small, only high KBDI values were associated with high NLBA values. Particularly for logarithmic values of 4 and higher, KBDI values increased in parallel with increases in NLBA values. On the basis of a Mann–Whitney U test done in addition to a Pearson correlation test, we found that when the burned areas were grouped according to small and large areas, the KBDI could be used to distinguish the two groups. Using a conditional probability analysis, we found that 4th, 5th and 6th class KBDI values may lead to large fires at the 60 % possibility.Similarly, the possibility of large fires greater than the median burned area in any given 6 years was found to be48 %. In addition, while the mean value of KBDI is 390.51 for the period from May to September for these 6 years, it is 359.93 for the other years. Consequently, the area burned also increased as the KBDI classes(Class 0: 0–99, Class 1:100–199, Class 2: 200–299, Class 3: 300–399, Class 4:400–499, Class 5: 500–599, Class 6: 600–699, and Class 7:700–800) increase.     

Evapotranspiration estimation of <Emphasis Type="Italic">Platycladus orientalis</Emphasis> in Northern China based on various models

Platycladus orientalis is one of the most popular afforestation species and greening species for water management in arid and semi-arid regions of northern China. We applied various models to estimate and validate artificial P. orientalis forest evapotranspiration features with the goal of accurately estimating the water use of a P.orientalis plantation. The American Society of Civil Engineers Evapotranspiration–Penman–Monteith model(APM) and FAO56–Penman–Monteith model(FPM) are extensively applied for vegetation evapotranspiration estimation because their reliability has been validated by many scholars. The Priestley–Taylor model(PT) and Hargreaves model(HS) require only the daily maximum temperature,daily minimum temperature and solar radiation to estimate evapotranspiration and are thus widely applied to grasslands but not to forests. We used the Energy Balance Bowen Ratio(EBBR) system to validate the accuracy of the four models. The results indicated that:(1) Compared to the EBBR measurement annual value, APM was the most accurate, followed by FPM, and PT;(2) During the year, the accuracies of the four models varied. APM and FPM underestimated evapotranspiration during June, July and August, whereas PT and HS overestimated evapotranspiration during this period. In the rest of the year, the estimation accuracies were reversed;(3) An analysis of the possible reasons indicated that wind speed, air temperature and precipitation were the most important contributors.High temperatures were measured in June, July and August, which led to an overestimation by PT and HS because these two models only calculated the temperature and radiation without vegetation information. Underestimation also occurred when a low temperature was recorded. Though APM and FPM addressed both meteorological and vegetation factors, slight deviations still existed; and(4) The two models were modified based on EBBR-measured data. Relative humidity was introduced into PT, and parameter ‘‘A’’ in the HS estimation model was amended to1.41. The accuracy of the modified models significantly increased. The study highlighted the application, comparison and improvement of four models in estimating evapotranspiration and offers more approaches to assess forest hydrological functions.     

Litterfall,decomposition and nutrient release of <Emphasis Type="Italic">Shorea robusta</Emphasis> and <Emphasis Type="Italic">Tectona grandis</Emphasis> in a sub-tropical forest of West Bengal,Eastern India

We studied leaf litter fall, decomposition and nutrient release patterns of Shorea robusta and Tectona grandis by using a litter bag technique to better understand the release pattern of nutrients to soil from leaf litter. Annual litterfall varied from 13.40 ± 2.56 t ha^?1 a^?1 for S. robusta to 11.03 ± 3.72 t ha^?1 a^?1 for T. grandis and the decay constant (k) of decomposed leaf litter was distinctly higher for T. grandis (2.70 ± 0.50 a^?1) compared to S. robusta (2.41 ± 0.30 a^?1). Biomass loss was positively correlated with the initial litter C, WSC, C/N and ash content in S. robusta and N, P and K concentration for T. grandis. Biomass was negatively correlated with lignin and L/N ratio for S. robusta and L, WSC, L/N and C/N ratio for T. grandis (P < 0.01). Nutrient use efficiency (NUE) and nutrient accumulation index (NAI) of S. robusta was higher than for T. grandis. The retranslocation of bioelements from senescent leaves ranked as P > N > K. Annual N, P and K input to soil through litterfall differed significantly between the two species in the following order: N>K>P. S. robusta was superior in terms of K and P return and T. grandis was superior in terms of N return. The two tree species showed a similar patterns of nutrient release (K > P > N) during decomposition of their leaf litter. Nutrients of N, K and P were the primary limiting nutrients returned to soil through litterfall with important roles in soil fertility and forest productivity.