VISAR Data Reducing Method and Its Application to Impact Experiment

Identification and adjustment on the disfigurements of original data of VISAR are probed by developing software for VISAR data reducing based on measure theory. Then the software is applied to plate impact experiment of ceramics. The disfigurements of light intensity data are identified and adjusted through Lissajou~ figures. The results indicate that VISAR data are reduced quickly and effectively by the software, and the exact free surface velocity history is obtained.     

Biodegradation of Linear Alkyl Benzene Sulphonate

The paper researches on the degradation of LAS (Linear Alkyl benzene Sulphonate) by combining AS1.860 immobilized with low intensity ultrasonic irradiation. The paper also discusses the influence of pH, rotary velocity, LAS concentration and the condition of low intensity ultrasonic irradiation on the degradation of LAS, the degradation rate of LAS is the main index of our experiment, the results of orthogonal test shows that low ultrasonic irradiation can increase the metabolizing of microorganism cells and facilitate the biodegradation of immobilized cells to LAS, here we research the degradation condition of 50mg/L LAS simulation wastewater with low ultrasonic irradiation, and the results show that the influence is obvious, the optimization degradation rate is about 83%, nine point five percent higher than that of the immobilized cells without ultrasonic irradiation.     

Analysis of the Sediment Development and Trend In Jinshajiang River Drainage Area

Jinshajiang River, which has a drainage area of 485,100 Km 2, average flux of 142.9 billion m 3, and soil conveyance of 247 million t/a, is the largest branch of Changjiang river. It is also the largest soil resource of the Three Gorges reservoir and upper reach of Changjiang River. To research the development and trend of Jinshajiang sediment not only has a relation to Jinshajiang water resource strategy, but also has important meaning to control the silt in Three Gorges reservoir and the Changjiang water resource development. The paper statistically analyses the flux and sediment conveyance of the Pingshan station, which is the primary hydrological station in the Jinshajiang River Drainage Area. Through several non-parameter statistical methods such as Spearman order correlativity check, Kendell order correlativity check, and linear regression check, the paper concludes that the sediment evolvement trend of Pingshan station is not distinct.     

Case- carburization Numerical Modeling and Craft Optimization on Steel Parts of Various Shapes

According to the diffusion equation of carburizing process and its boundary conditionand initial condition, various shapes steel parts are modeled under various case carburize craft parameters, concentration distribution curves have been obtained. Various craft parameters are compared, and carburizing temperature has more influence on carbon concentration distribution. Various shapes steel parts' carbon concentration distribution curves have some difference. According to the carbon concentration distribution curve, craft parameters can be adjusted in order to obtain the best carburizing craft.     

Effect of the Silicic Acid Polymerization Degree on the Coagulating Property of Polyalumium Silicate Chloride

Polyaluminum silicate is a new type of inorganic macromolecular flocculants, which is developed as a complex product in recent years on the base of polyalumium flocculant and polysilicic acid flocculant. Sodium silicate is diluted to the concentration of 3.0% SiO 2 with distilled water. The solution was adjusted to pH 4.5 with sulphate acid and kept at quiescency for different time to get polysilicic acid with different polymerization degrees. Using polysilicic acid prepared and aluminium chloride as materials, a series of polyaluminium silicate chlorides(PASC) with different basicities(B), Al/Si molar ratios and polymerization degree of silicic acid are prepared by copolymerization technique. The Al-Ferron timed complex colorimetric method is applied to characterize species distribution of PASC and to study its influence factors. The interaction between hydrolyzed aluminum species and polysilicic acid with different polymerization degrees in PASC is discussed.The flocculant prepared is applied to the treatment of commercial concrete wastewater. The turbidity removal of commercial concrete wastewater is up to 97% when a PASC, prepared with polysilicic acid of 145 min polymerization degree.     

A Furry Synthetic Evaluation Model in Capital Structure Decisions

This paper analyzes the limitation of regarding the weighted average cost of capital as the optimal standard of capital structure in the traditional capital structure decision-making method, and analyzes the view that the capital structure is affected by many factors,such as earning power, long-term stability of operating, the attitudes held by owners and operators, the attitudes held by creditors and financial risk. With the example, the affecting factors of the capital structure is analyzed. The fuzzy synthetic evaluation model are employed to decision-making of the capital structure. This article also shows the key point of its application.     

Fingerprint of GBE by Microemulsion High Performance Thin-layer Chromatography

Twelve types of gingko flavonoids were separated with SDS/n -C4 HgOH/n- C7 Hls/H2O microernlusion as developer on polyamide film. The polarity of the microemulsion was regulated through adding or reducing water. Compared with general mobile phase, the sensitivity of detection was improved markedly and the test results were satisfied. By means of HPTLC, fingerprint was argued on gingko flavonoids. It can meet the needs of simple and convenient, reasonable standard quality control methods.     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。