Work quality and veneer value recovery of mechanised and manual log-making in Italian poplar plantations

In Italy, poplar plantations represent an important source of wood products, and especially of high-quality veneer logs. These plantations offer favourable conditions to the introduction of forest mechanisation, and especially easy access and industrial management. However, owners fear that mechanised log-making may cause value losses, due to poor length measurement, log surface damage and improper grading. This study compared the performance of manual and mechanised log-making on ten commercial operations, in order to determine the occurrence and the severity of possible value losses due to product degrade. The study found that length measurement errors are smaller for mechanised processing, while the frequency and severity of log surface damage are the same for both treatments. In three cases out of five, mechanised log-making extracted the same value from the stems as manual log-making: in the remaining two, differences were very small and went opposite directions. Significant differences were found between operators, stressing the importance of operator skills and motivation. In fact, the log-making specifications and the pricing structure applied to poplar processing are relatively simple and are unlikely to challenge the ability of personnel and equipment. At present, most Italian poplar growers are unaware of the potential offered by modern technology, whose intelligent use would boost value recovery and decrease harvesting cost. Significant benefits may derive from the introduction of optimised bucking, which may help shifting to a more articulated and rewarding product strategy.     

Modelling and mapping the suitability of European forest formations at 1-km resolution

Proactive forest conservation planning requires spatially accurate information about the potential distribution of tree species. The most cost-efficient way to obtain this information is habitat suitability modelling i.e. predicting the potential distribution of biota as a function of environmental factors. Here, we used the bootstrap-aggregating machine-learning ensemble classifier Random Forest (RF) to derive a 1-km resolution European forest formation suitability map. The statistical model use as inputs more than 6,000 field data forest inventory plots and a large set of environmental variables. The field data plots were classified into different forest formations using the forest category classification scheme of the European Environmental Agency. The ten most dominant forest categories excluding plantations were chosen for the analysis. Model results have an overall accuracy of 76%. Between categories scores were unbalanced and Mesophitic deciduous forests were found to be the least correctly classified forest category. The model’s variable ranking scores are used to discuss relationship between forest category/environmental factors and to gain insight into the model’s limits and strengths for map applicability. The European forest suitability map is now available for further applications in forest conservation and climate change issues.     

Preference and performance of <Emphasis Type="Italic">Plutella xylostella</Emphasis> (L.) (Lepidoptera: Plutellidae) on canola cultivars

The diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), is an important insect pest of canola, Brassica napus L., in Ardabil, Iran. Host plant resistance is an essential component of integrated management of P. xylostella. We investigated the preferences and performance of P. xylostella on nine commercial cultivars of canola, namely Zarfam, RGS003, Adder, Okapi, Opera, Hyola401, Ebonite Option500 and Elite under greenhouse conditions at 23 ± 1°C, 50 ± 5% RH and 14L:10D. In free-choice situation, oviposition was lowest on Opera (23.5) and highest on Zarfam (44.7). In the life table study, fecundity of new generation female moths was lowest on Opera (95.4) and highest on Adder (145.7). Survival from egg to adult was significantly lower on Opera, Option500 and Hyola401 than on other tested cultivars. The intrinsic rate of natural increase (r _m) and population growth rate (λ) were lowest on Opera and highest on Zarfam. The generation time (T) was shortest on Zarfam (17.2 days) and longest on Hyola401 (19.9 days) whereas doubling time (DT) was longest on Opera (3.9 days) and shortest on Zarfam (3.0 days). Our results clearly suggest that Opera was the most resistant host among the tested cultivars and has the potential to be used in the integrated management of P. xylostella.     

Curing and degradation processes of cement-bonded particleboard by supercritical CO<Subscript>2</Subscript> treatment

This study examined the effects of supercritical CO₂ treatment on the curing and degradation of cementbonded particleboard (CBP). Significant correlations were found between the supercritical CO₂ treatment and mechanical properties during both curing and degradation processes. Internal bond (IB) strength, modulus of rupture (MOR), and modulus of elasticity (MOE) values of CBP achieved their maximums by supercritical CO₂ treatment in 30 min. These conditions indicated that supercritical CO₂ treatment accelerates the curing process rapidly and enhances the mechanical properties of the CBP. However, these values decreased in treatment from 60 min to 10 days and had a negative effect on board performance, indicating that supercritical CO₂ treatment over a longer time span leads to degradation of the CBP. Furthermore, X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observation clarified that the mechanisms of degradation are directly affected by the mineralogical composition of the system, in par ticular, by the calcium carbonate content as caused by carbonation.     

Strength properties of glued laminated timber made from edge-glued laminae II: bending,tensile, and compressive strength of glued laminated timber

The purpose of this study was to investigate the strength properties of glued laminated timber composed of edge-glued laminae and to investigate the influence of edge gluing on the strength properties. Glued laminated timber composed of multiple-grade laminae (symmetrical composition, strength grade E95-F270, 10 laminations) was produced from karamatsu (Larix kaempferi) edge-glued laminae according to the Japanese Agricultural Standard. The bending, tensile, and compressive strengths of the glued laminated timber were measured. The average bending, tensile, and compressive strengths were 33.4, 24.5, and 35.9 MPa, respectively, and these values are almost equal to those of glued laminated timber composed of karamatsu single-piece laminae. It was determined that finger-joints and knots in the edge-glued laminae played a significant role in the failure of specimens. However, the use of glued edge-joints did not appear to affect the failure of specimens.     

Cost-effective strategies to conserve boreal forest biodiversity and long-term landscape-level maintenance of habitats

Setting aside parcels of land is the main conservation strategy to reduce the rate of biodiversity loss worldwide. Because funding for biological conservation is limited, it is important to distinguish the most efficient ways to use it. Here, we assess implications of alternative measures to conserve biodiversity in managed boreal forest landscapes. We calculated four alternative spatio-temporal scenarios and compared these to the current management regime over 100-year time period. In the alternative scenarios, a fixed amount of funding was invested in (1) permanent large reserves (each tens of ha in size), (2) permanent small reserves (each a few ha in size), (3) temporary small reserves (based on 10-year contracts with private land owners), and (4) green-tree retention (small groups of trees retained on clear-cuts). To assess biodiversity implications, we used habitat suitability indices to calculate overall habitat availability for five groups of red-listed and habitat-specific species associated with decaying spruce logs. The possibilities for timber harvests did not differ among the scenarios, but biodiversity performance was different. The scenarios with permanent reserves tended to outperform other scenarios, suggesting that conservation policies based on permanent reserves are the most cost-efficient in the long term. Results, however, varied among time scales and species groups. In the short term, a strategy of investment in temporary small reserves was the most efficient. Habitat for species associated with old spruce dead-wood and preferring shade was rare throughout all simulations, and therefore, it is likely that these species cannot be sustained in managed forests. Species that live on fresh dead-wood and are associated with forest edges coped well in all scenarios suggesting that such species will persist in managed landscapes without additional conservation efforts. Explicit definition of conservation objectives and time frames for conservation action are thus prerequisites for successful conservation planning.     

FTIR-ATR-based prediction and modelling of lignin and energy contents reveals independent intra-specific variation of these traits in bioenergy poplars

Background  

There is an increasing demand for renewable resources to replace fossil fuels. However, different applications such as the production of secondary biofuels or combustion for energy production require different wood properties. Therefore, high-throughput methods are needed for rapid screening of wood in large scale samples, e.g., to evaluate the outcome of tree breeding or genetic engineering. In this study, we investigated the intra-specific variability of lignin and energy contents in extractive-free wood of hybrid poplar progenies (Populus trichocarpa × deltoides) and tested if the range was sufficient for the development of quantitative prediction models based on Fourier transform infrared spectroscopy (FTIR). Since lignin is a major energy-bearing compound, we expected that the energy content of wood would be positively correlated with the lignin content.