Photoperiod influences the growth, food intake, feed efficiency and digestibility of red sea bream (Pagrus major)

Two consecutive trials were conducted to investigate the effects of photoperiod manipulation on growth rate, food intake and feed conversion efficiency (Trial 1), and the digestibility of nutrients and energy (Trial 2) in red sea bream, Pagrus major (body weight 19–120 g). Fish were exposed to four photoperiods (6L:6D, 12L:12D, 16L:8D and 24L:0D) with light intensity 1500 lx on the water surface. The fish were fed with a commercial diet to apparent satiation. In Trial 2, 0.5% chromic oxide (Cr₂O₃) was used as an inert marker. Significantly higher weight gain and specific growth rates were observed in fish exposed to a 24L:0D photoperiod followed by 16L:8D, 6L:6D and 12L:12D photoperiods (P < 0.05). Food intake and feed conversion efficiency (FCE) were also significantly higher in fish exposed to 24L:0D followed by 16L:8D, 6L:6D and 12L:12D photoperiods (P < 0.05). Fish exposed to 24L:0D and 16L:8D photoperiods showed significantly higher lipid and energy digestibility than those exposed to a 12L:12D photoperiod (P < 0.05). The results demonstrated that the enhancement of growth performances under 16L:8D and 24L:0D photoperiods were attributed to improved appetite, greater food intake and higher feed conversion efficiency as well as higher digestibility.     

Insect glutathione S-transferase: Separation of transferases from fat bodies of American cockroaches active on organophosphorus triesters

Several glutathione S-transferases which catalyze the conjugation of reduced glutathione with organophosphorus triesters were separated from fat bodies of adult female American cockroaches, Periplaneta americana (L.). Two transferases (I, V) were active on diazinon and three transferases (II, III, IV) were active on methyl parathion. The transferase (I) active on the pyrimidinyl moiety of diazinon was distinguishable from the other transferases on the O-methyl portion of methyl parathion, as shown by chromatographic properties, and additionally it was almost inactive or less active on 3,4-dichloronitrobenzene, methyl iodide, p-nitrobenzyl chloride, trans-cinnamaldehyde, and 1,2-epoxy-3-(p-nitrophenoxy)propane. Transferase II had high activities with “aryl” and “aralkyl” compounds, transferase III with “epoxide” and “alkene,” and transferase IV with “alkyl,” “aryl,” and “aralkyl” compounds. This indicated that the transferases had overlapping substrate specificities. The molecular weight was 35,000–37,000 for both of the enzymes active on methyl parathion and diazinon. The pH optima with methyl parathion and diazinon were about 8.5 and 6.5, respectively. At a glutathione concentration of 5 mM, Michaelis constants were 0.28 and 0.13 mM for methyl parathion and diazinon, respectively.     

Photoperiod sensitivity gene controlling heading date in rice cultivars in the northernmost region of Japan

Rice is grown in diverse environments at latitudes ranging from 53^°N to 40^°S. In Japan, Hokkaido is the northernmost rice cultivation region(42–45^°N latitude). Only extremely early maturing (heading) varieties that have extremely low photoperiod sensitivity are adapted to this area. Heading date is the most important trait in adaptation to this particular environment. Also, the efficient manipulation of heading date is a crucial component of rice improvement. To determine the genetic basis for heading date among cultivars grown in Hokkaido, the heading behaviour was analyzed. Clear segregations were observed. To estimate the photoperiod sensitivity of the genes involved, the cultivars and F₁ plants from crosses between the cultivars were grown under different daylength conditions. The results indicated that the genes controlling heading date are photoperiod sensitive, suggesting they play important roles in the northernmost rice cultivation regions in Japan, to which only cultivars with extremely low photoperiod sensitivity are adapted. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influences of Forest Decline on Various Properties of Soils at Mt. Hirugatake, Tanzawa Mountains, Kanto District, Japan

At Mt. Hirugatake in the Tanzawa Mountains, Kanto district, Japan, the deciduous broadleaved forests have rapidly declined. In our previous studies, we reported that the amount of soil organic matter had significantly decreased at the early and final stages of forest decline, and that the soil microbial biomass also showed a large decrease at these stages, suggesting that the composition of soil organic matter might have also changed with forest decline. To clarify the influences of forest decline on the composition of soil organic matter, the amount of humic substances, optical properties of humic acid, and the amount of soil carbohydrates in surface soils at different stages of forest decline were investigated. The amounts of humic acid and fulvic acid decreased to a lesser extent at the early and middle stages of forest decline, and showed a significant decrease at the final stage. As the amount of humin significantly decreased at the early stage, it was plausible that the distinct decrease in the total carbon content of the soil surface horizons at the early stage of forest decline was induced by the decrease in the amount of humin, and at the final stage, by the decrease in the amounts of humic acid and fulvic acid. The amount of soil carbohydrates did not change appreciably with forest decline although the soil organic matter content markedly decreased. It was suggested that most of the carbohydrates in the soil surface horizons were in a stabilized form consisting of complexes with humic substances, metals, and minerals, and would not be affected by the environmental changes associated with forest decline.     

Effect of pH on the thermal stability of potent roasty odorants, 3-mercapto-3-methylbutyl esters, in coffee drink

The effect of pH on the thermal stability of potent roasty odorants, 3-mercapto-3-methylbutyl esters, in coffee drinks was investigated. The concentration of 3-mercapto-3-methylbutyl formate in the coffee drink was drastically decreased during the heat processing. However, the residual ratio of this compound in the coffee drink adjusted to pH 5.0 was higher than that of pH 6.5. On the other hand, the residual ratios of 3-mercapto-3-methylbutyl acetate showed high values in the coffee drinks adjusted to both pHs. In the pH range of 3-7, the residual ratios of 3-mercapto-3-methylbutyl formate in aqueous model solutions varied depending on the pH value. It had a thermal stability maximum at pH 4.0, while 3-mercapto-3-methylbutyl acetate showed stability during heat processing over all the pH values tested. In addition, the residual ratios of the formate and acetate esters, which were composed of various alcohol derivatives, showed the same tendency as that of the 3-mercapto-3-methylbutyl esters. These results suggested that the low thermal stability and pH dependence of 3-mercapto-3-methylbutyl formate are based on the structure of the formate ester.     

A rubberlike stretchable active matrix using elastic conductors

By using an ionic liquid of 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide, we uniformly dispersed single-walled carbon nanotubes (SWNTs) as chemically stable dopants in a vinylidene fluoride-hexafluoropropylene copolymer matrix to form a composite film. We found that the SWNT content can be increased up to 20 weight percent without reducing the mechanical flexibility or softness of the copolymer. The SWNT composite film was coated with dimethyl-siloxane-based rubber, which exhibited a conductivity of 57 siemens per centimeter and a stretchability of 134%. Further, the elastic conductor was integrated with printed organic transistors to fabricate a rubberlike active matrix with an effective area of 20 by 20 square centimeters. The active matrix sheet can be uniaxially and biaxially stretched by 70% without mechanical or electrical damage. The elastic conductor allows for the construction of electronic integrated circuits, which can be mounted anywhere, including arbitrary curved surfaces and movable parts, such as the joints of a robot's arm.     

Curing and degradation processes of cement-bonded particleboard by supercritical CO<Subscript>2</Subscript> treatment

This study examined the effects of supercritical CO₂ treatment on the curing and degradation of cementbonded particleboard (CBP). Significant correlations were found between the supercritical CO₂ treatment and mechanical properties during both curing and degradation processes. Internal bond (IB) strength, modulus of rupture (MOR), and modulus of elasticity (MOE) values of CBP achieved their maximums by supercritical CO₂ treatment in 30 min. These conditions indicated that supercritical CO₂ treatment accelerates the curing process rapidly and enhances the mechanical properties of the CBP. However, these values decreased in treatment from 60 min to 10 days and had a negative effect on board performance, indicating that supercritical CO₂ treatment over a longer time span leads to degradation of the CBP. Furthermore, X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observation clarified that the mechanisms of degradation are directly affected by the mineralogical composition of the system, in par ticular, by the calcium carbonate content as caused by carbonation.     

Methane emissions from stems of Fraxinus mandshurica var. japonica trees in a floodplain forest

We measured methane (CH₄) emissions from the stem surfaces of mature Fraxinus mandshurica var. japonica trees in a floodplain forest. Flux measurements were conducted almost monthly from May to October 2005, and positive CH₄ fluxes were detected throughout the study period, including the leafless season. The mean CH₄ flux was 176 and 97 μg CH₄ m⁻² h⁻¹ at the lower (15 cm above the ground) and upper (70 cm above the ground) stem positions, respectively. The CH₄ concentration was lower in soil gas than in ambient air to a depth of at least 40 cm. One possible source of CH₄ emitted from the stems might be the dissolved CH₄ in groundwater; maximum concentrations were 10,000 times higher than atmospheric CH₄ concentrations. Our results suggest that CH₄ transport from the submerged soil layer to the atmosphere may occur through internal air spaces in tree bodies.