Design and pilot production of a “spiral-winder” for the manufacture of cylindrical laminated veneer lumber

A new spiral-winder was developed for continuous manufacturing of cylindrical laminated veneer lumber (LVL), and a suitable resin adhesive for this cylindrical LVL manufacturing system was investigated. This phase was followed by trial manufacturing and evaluation of cylindrical LVL with the optimum resin adhesive identified. The results are summarized as follows. (1) The shortest gelation time was recorded with a mixture of two commercial resorcinol based resins (DF-1000 and D-33) at a weight ratio of 2575. (2) Bath temperature had a remarkable effect on the gelation time of the adhesive mix. (3) High bonding strength was recorded by 2575 DF-1000/D-33 adhesive mix at a high press temperature despite a short pressing duration. Based on the results of items (1) to (3), 2575 DF-1000/ D-33 is recommended for use in the new spiral-winder. (4) The mechanical properties of cylindrical LVL could be improved by using 2575 DF-1000/D-33 with wider veneer width and longer pressing time. (5) The mechanical properties, especially the modulus of rupture, of the cylindrical LVL manufactured require further improvement for practical structural application.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.     

Seasonal parasitism of native egg parasitoids of brown marmorated stink bug (Halyomorpha halys) in Japan

Journal of Pest Science - The invasive, Halyomorpha halys (Hemiptera: Pentatomidae), is a severe economic insect pest native to East Asia. A strong effort has been made to identify natural egg...     

Excellent oil absorbent kapok [Ceiba pentandra (L.) Gaertn.] fiber: fiber structure, chemical characteristics, and application

The study focused on kapok [Ceiba pentandra (L.) Gaertn.] fruit as a biomass for effective utilization. Kapok fruits were harvested just before full maturation at the campus of University of the Philippines Los Banos and in southern Vietnam. The kapok fibers are utilized locally as fiberfill in pillows, quilts, and some soft toys. Kapok fiber was isolated and analyzed microscopically, and the physicochemical properties were determined by spectroscopic methods. Some tests were done to determine the effective utilization of kapok fiber. Microscopic analysis of the higher structure of kapok fiber gave quite different results from cotton fiber, which has a significantly homogeneous hollow tube shape and is composed of cellulose (35 % dry fiber), xylan (22%), and lignin (21.5%). Kapok fiber is characterized by having a high level of acetyl groups (13.0%). Usually cell walls of plants contain about 1%–2% of acetyl groups attached to noncellulosic polysaccharides. Kapok fiber is significantly hydrophobic and does not get wet with water. Thus, the absorptivity of oil was tested. The fiber selectively absorbed significant amounts of oil (40 g/g of fiber) from an oil suspension in freshwater and seawater. It is suggested that this fiber could be used to recover oil spilled in seawater.     

Characterization of genes for novel thaumatin-like proteins in Cryptomeria japonica

Thaumatin-like proteins (TLPs) are induced by a variety of phytopathogens in many plants and several TLPs are allergenic. Previously, we isolated three TLP-encoding cDNAs (Cry j 3.1, Cry j 3.2 and Cry j 3.3) from a cDNA library derived from the pollen of Cryptomeria japonica D. Don. Here, we describe three new TLP cDNAs (Cry j 3.4, Cry j 3.5 and Cry j 3.6). We compared the sequences, the genetic map location and the expression patterns of the Cry j 3 genes. The amino acid sequence predicted from Cry j 3.5 exhibits only limited similarity to those predicted from the other Cry j 3 genes. Linkage analysis showed that the Cry j 3.1 to Cry j 3.4 genes are located in the same linkage group, but Cry j 3.5 is located in a different group. Organ-specificity and induction by stresses and plant hormones differed among the Cry j 3 mRNAs. In pollen grains, the Cry j 3.5 mRNA expression level was higher than that of the other Cry j 3 genes. Exposure to UV-B and salt stress induced expression of Cry j 3.1. The ethylene-releasing compound ethephon strongly induced expression of Cry j 3.4. Salt stress and salicylic acid also induced expression of Cry j 3.4. Abscisic acid weakly induced expression of Cry j 3.5. Arachidonic acid strongly induced expression of Cry j 3.4 and Cry j 3.6, and weakly induced that of Cry j 3.3, whereas expression of Cry j 3.1 and Cry j 3.5 was unaffected. These results suggest that the roles of TLPs and the cascades that regulate their expression differ among the members of the TLP family in C. japonica.     

Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard II: influences of pressing temperature and time on particleboard properties

Development of environmentally friendly particleboard made from sweet sorghum bagasse and citric acid has recently attracted attention. In this study, we investigated the effects of pressing temperature and time on physical properties, such as dry bending (DB), internal bond strength (IB), and thickness swelling (TS) of particleboard. Wet bending (WB), screw-holding power (SH), biological durability, and formaldehyde emission of particleboard manufactured under effective pressing temperature and time were also evaluated. Particleboards bonded with phenol formaldehyde (PF) resin and polymeric 4,4′-methylenediphenyl isocyanate (pMDI) were manufactured as references. Effective pressing temperature and time were 200?°C and 10 min, respectively. It was clarified that DB, IB, and TS satisfied the type 18 requirements of the JIS A 5908 (2003), and were comparable to those of particleboard bonded with PF and pMDI. The WB and SH of particleboard did not satisfy type 18 of JIS. Particleboard manufactured under effective pressing conditions had good biological durability and low formaldehyde emission. Based on the results of infrared spectra measurement, the degree of ester linkages increased with increased pressing temperature and time.     

Decomposition behavior of woody biomass in water-added supercritical methanol

The chemical conversion of Japanese beech (Fagus crenata Blume) in water-added supercritical methanol was studied for a wide range of water content using a batch-type reaction vessel to obtain chemicals from lignocellulosics. It was consequently found that addition of water enhanced the decomposition of wood cell wall components; cellulose, hemicelluloses, and lignin. In cases of high water content, however, it resulted in low solubility of lignin-derived products causing an increase in the mass of the residue. The water content was thus optimized to be around 10% (v/v) for the decomposition of wood. Concomitantly, the yields and selectivity of the chemicals from wood could be regulated by the addition of water, especially for the lignin-derived products. As a result, the monomeric compounds of lignin, coniferyl alcohol and sinapyl alcohol, were recovered as their γ-methyl ethers in the presence of water in higher yields than those obtained without addition of water.     

Thermo characteristics of steam-exploded bamboo (Phyllostachys pubescens) lignin

Bamboo (Phyllostachys pubescens) internode was subjected to steam explosion treatment to produce an excellent fiber for binderless boards. Lignin was isolated from extract-free bamboo meal with Björkman’s procedure and steam-exploded pulp. The self binding-mechanism was discussed by scanning electron microscopy (SEM), thermo-gravimetry (TG), differential scanning calorimetry (DSC) and analytical ozonation. It is well-known that steam explosion treatment liberates lignin from the cell wall to the fiber surface, which is the most important component relevant to binderless board production. Results of TG and DSC analyses showed that steam-exploded bamboo pulp started mass loss at lower temperature compared to bamboo internode meal. The thermal softening temperature of lignin prepared from steam-exploded pulp was much lower than that of lignin prepared from extract-free bamboo meal. This suggests that intermonomer linkages of lignin, especially β-aryl-ether linkage which is the major intermonomer linkage of lignin, were cleaved during steam explosion treatment resulting in low molecular weight phenolic compounds. The cleavage of β-aryl-ether intermonomer linkage of lignin was also confirmed by ozonation analysis.     

Field trap test for bioassay of synthetic (1<Emphasis Type="Italic">S</Emphasis>,4<Emphasis Type="Italic">R</Emphasis>)-4-isopropyl-1-methyl-2-cyclohexen-1-ol as an aggregation pheromone of <Emphasis Type="Italic">Platypus quercivorus</Emphasis> (Coleoptera: Platipodidae)

An ambrosia beetle, Platypus quercivorus, is a vector of Japanese oak wilt, which causes massive mortality of oak trees in Japan. Previous studies have identified (1S,4R)-4-isopropyl-1-methyl-2-cyclohexen-1-ol ((−)-IMCH) as the major component of the aggregation pheromone of P. quercivorus. We tested the ability of synthetic (−)-IMCH to attract P. quercivorus adults. The synthetic compound attracted 14.4 times as many P. quercivorus, of both sexes, as control traps. Control and (−)-IMCH-baited traps both captured 3.32 times as many males as females, probably because of the nature of Lindgren funnel traps and of male-biased emergence sex ratio early in the season of adult flights. (−)-IMCH was proved to be a major component of the aggregation pheromone of P. quercivorus.