Hydraulic conductivity in roots of ponderosa pine infected with black-stain (Leptographium wageneri) or annosus (Heterobasidion annosum) root disease

Roots from healthy and diseased mature ponderosa pine, Pinus ponderosa Laws., trees were excavated from a site near Burns, Oregon. The diseased trees were infected with black-stain root disease, Leptographium wageneri Kendrick, or annosus root disease, Heterobasidion annosum (Fr.) Bref., or both. Axial hydraulic conductivity of the roots was measured under a positive head pressure of 5 kPa, and the conducting area was stained with safranin dye to determine specific conductivity (k(s)). In diseased roots, only 8-12% of the cross-sectional xylem area conducted water. Resin-soaked xylem completely restricted water transport and accounted for 13-16% of the loss in conducting area. In roots with black-stain root disease, 17% of the loss in conducting area was associated with unstained xylem, possibly resulting from occlusions or embolisms. Based on the entire cross-sectional area of infected roots, the k(s) of roots infected with black-stain root disease was 4.6% of that for healthy roots, whereas the k(s) of roots infected with annosus root disease was 2.6% of that for healthy roots. Although these low values were partly the result of the presence of a large number of diseased roots (72%) with no conducting xylem, the k(s) of functional xylem of diseased roots was only 33% of that for healthy roots. The low k(s) values of functional xylem in diseased roots may be caused by fungus induced occlusions preceding cavitation and embolism of tracheids. The k(s) of disease-free roots from diseased trees was only 70% of that for healthy roots from healthy trees. The disease-free roots had the same mean tracheid diameter and tissue density as the healthy roots, suggesting that the lower k(s) in disease-free roots of diseased trees may also have been caused by partial xylary occlusions.     

An “electronic nose” as a potential device for fire detection of forest product fire loads in enclosures

Abstract

Saving lives and properties are of primary importance in fire disasters. Unfortunately, current fire detectors are not fast enough to allow the detection of many fires, especially, at the smouldering stages. Some preliminary studies on laevoglucosan (LG), as an important product from cellulose degradation, have shown interesting properties and could be detected by devices classified as “electronic noses” (e-noses). In the present work, the mechanisms of pyrolysis of some ligno-cellulosic materials were investigated using thermo-gravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy and by a tube furnace with a view to determining the major degradation products from wood, white paper and cardboard samples. Additionally, an odour sensor, made of tin oxide semiconductor thin film, was employed to evaluate its sensitivity in detecting LG. It was found that LG can be readily found among the thermal degradation products of cellulosic materials in question, and that the metal oxide sensor employed was sufficiently sensitive in detecting its presence. Therefore, the work opens up the potential of using such a sensor as an “e-nose” for the early detection of fires stemming from forest product fire loads in storage places and in other enclosures.     

Technical change in forest sector models: the global forest products model approach

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes over time of the input–output (I–O) coefficients and of the manufacturing cost (labor, capital, and materials, excluding wood and fiber). In the case of the global forest products model, the I–O coefficients and the manufacturing costs are determined empirically from historical data, while correcting for possible reporting errors. The method consists of goal programming. The objective function is the sum of the weighted absolute value of the deviations from estimated and observed production in each country of interest. The constraints express the relationship between the multiple output (sawnwood, panels, pulp, paper) and input (wood, waste paper, other fiber) and prior knowledge on the limits of the I–O coefficients. The paper presents observed technical changes from 1993 to 2010 and projections to 2030 with their consequences for the global forest sector in terms of prices, production and consumption, value added, and carbon sequestration in forest biomass.     

Transverse shrinkage in G-fibers as a function of cell wall layering and growth strain

Transverse drying shrinkage was measured at microscopic and mesoscopic levels in poplar wood characterised by an increasing growth strain (GS), from normal to tension wood. Results show that: (a) the drying shrinkage, measured as a relative thickness decrease, was significantly higher for G-layer (GL) than for the other layers (OL), GL shrinkage was not significantly correlated with GS, and OL shrinkage was negatively correlated with GS. (b) In gelatinous fibre (G-fibre), lumen size increased during drying and this increase was positively related with GS, but in normal wood fibre, lumen size decreased during drying. These findings suggest that GL shrank outwards (i.e., its internal perimeter increases), so that its shrinkage weakly affected the total cell shrinkage and the mesoscopic shrinkage was controlled by the OL shrinkage which shrank inwards (i.e., its external perimeter decreases). (c) Measurements done on 7 × 7 mm2 thin sections evidenced a negative correlation between transverse shrinkage and GS, significant in T direction but weak in R direction. These observations at both levels allow to discuss the contribution of GL to the mesoscopic shrinkage of tension wood.     

Modeling intra-crown and intra-canopy interactions in red maple: assessment of light transfer on carbon dioxide and water vapor exchange

Daily and seasonal net photosynthesis (Anet), transpiration (E), absorbed photosynthetically active radiation (Qa) and light-use efficiency (epsilonc) in a red maple container nursery were simulated with MAESTRA, a three-dimensional canopy model. Effects of canopy heterogeneity were simulated by imposing changes in crown spacing. The light transfer sub-model, a distribution model of incident, direct, diffuse and scattered radiation within MAESTRA, was validated against field measurements of light interception on an intra-crown scale. In the container nursery, we found that a fiber-optic-based method of integrating photosynthetically active radiation (Q) was more suitable for crown-layer light transfer measurements and adjustments than either orthogonal line or individual quantum sensor measurements. The model underestimated intercepted Q by 9.3, 18 and 11.1% for crown layers 1, 2 and 3, respectively; however, there were linear relationships between model estimates and observations made with each of the three measurement methods. We used the validated and parameterized light transfer model to assess intra-crown and intra-canopy light transfer on a layer, crown and canopy basis, and investigated effects of tree size ratio and tree spacing interactions on Anet, E, Qa and epsilonc in the container nursery. Heterogeneous crown and canopy photosynthesis were predicted to exceed values for a uniform canopy under space-limiting conditions. Tree size ratio had large effects on Anet, E, Qa and epsilonc when light to lower-canopy layers was limited by inadequate space between crowns. Increasing Qa at lower-crown layers had the largest impact on whole-crown and whole-canopy Anet, E, Qa and epsilonc. Increases in canopy productivity led to increased water use. Simulations of heterogeneous stands with adequate soil water indicated that light absorption is maximized under space-limiting conditions as a canopy crown moves toward heterogeneity. Nursery and plantation productivity per unit land area was optimized by tactical placement of trees of several sizes, but this was accompanied by increased canopy water use.     

Understanding the economic and farming practices driving species selection in aquaculture within the Mymensingh division of Bangladesh

Aquaculture is a major supplier of animal protein for Bangladesh’s population, and the Mymensingh division is a major contributor to finfish aquaculture, producing 43% of the total pond pangasius and 9% of the total amount of tilapia (figures from 2018). We conducted a finfish farmer survey covering Netrokona, Jamalpur and Mymensingh districts to understand current finfish farming practices and identify factors that drive farmers in their species choice between pangasius or tilapia cultivation. We found that most finfish farmers in Mymensingh are experienced practitioners and practise polyculture with a range of stocking densities for each species. Using an economic model of polyculture practice, we have shown that over a production cycle, pangasius gain body mass at a rate nearly 4 times greater than that for tilapia, resulting in substantially larger revenues and providing a strong incentive for their culture. High levels of tilapia aquaculture likely persist due to their short production cycle and an associated decreased economic risk due to crop loss from disease, both factors providing a strong incentive for their culture. Our findings also indicate production yield differences through different species selection in polyculture systems. For example, co-culturing pangasius, tilapia and carp together was less productive than co-culture of pangasius with tilapia. Furthermore, higher yields of tilapia were obtained when co-cultured with carp compared with pangasius, the reasons for which are not known and warrant further investigation. Our study uses information provided by finfish farmers to produce a useful guide on fish species choices to maximise production yields, and therefore food production, from their ponds.

     

Dietary nano-chromium tripicolinate increases feed intake and decreases plasma cortisol in finisher gilts during summer

Chromium (Cr) is an essential mineral element and has been used in pig diets to improve growth performance, insulin sensitivity, immune response and carcase traits and to reduce heat or other stress responses. The aims of thiss study were to determine the impact of nano-sized chromium tripicolinate (nCrPic) on growth performance, feed efficiency and carcase characteristics of finisher gilts during the summer period. A total of 60 finisher Large White x Landrace gilts were stratified on initial weight and then within strata randomly allocated into two treatment groups in three replicates during mid-summer for 28 days. All pigs were housed in individual pens and had ad libitum access to feed and water. Pigs were fed either a control finisher diet (wheat-based diet containing 13.8 MJ digestible energy (DE) per kilogram and 0.56 g available lysine/MJ DE) or a control diet containing 400 ppb Cr as nCrPic. Dietary nCrPic supplementation increased feed intake by 6 % over the entire study (P?=?0.05). In particular, dietary nCrPic increased average daily feed intake (ADFI) by 8 % (P?=?0.02) during the final 2 weeks of the study. Moreover, dietary nCrPic tended to improve average daily feed (ADFI) over the entire study (P?=?0.09). However, there were no significant effects of nCrPic on feed conversion ratio (FCR), final weight, hot standard carcase weight (HCWT), P2 depth or dressing percentage. Plasma cortisol was decreased by 25 % (P?=?0.06) by dietary nCrPic supplementation. However, there were no effects of nCrPic on plasma glucose, insulin and nonesterified fatty acids (NEFA), might because of the higher feed intake. In conclusion, this study demonstrates that dietary nCrPic supplementation at 400 ppb can increase feed intake in finisher gilts during mid-summer, suggesting that nCrPic can ameliorate some of the negative effects of heat stress in pigs, possibly via decreased of circulating cortisol.