我国种子标准化的现状与发展思路

种子标准化就是将传统的生产经验与现代的科技成果相结合,制订出一系列因地制宜、简明可行的标准,指导和规范种子生产的产前、产中、产后全过程以及种子的加工、经营、销售等活动,从而取得经济、社会和生态的最佳效益.种子作为农业生产资料在种植业中的地位特殊,无法取代,种子标准化工作是实现农业标准化的基础,加强种子标准化工作是实现种子产业可持续发展、促进种子企业走向现代化,体现种子企业服务农业和农民宗旨的重要内容.     

Design method and homogeneity control of bridge fair-faced concrete

According to the structural characteristics of bridge engineering, the mix optimization design method of bridge fair-faced concrete was presented, and C30~C50 concrete with high cohesion and package, outstanding fluidity and excellent mechanical properties were prepared. Through the test of air content of fresh concrete, micro hardness and micro structure in different parts of hardened concrete specimens, effects of viscosity-modifying admixtures on homogeneity of concrete were discussed. The results showed that the composition of bridge fair-faced concrete were relatively homogeneous, and the microstructure were relatively dense. When C30 concrete mixed with 5 × 10 -5 cellulose ether or 6% silica fume (mass fraction of cementitious material), air content of fresh concrete were less than 2%, and slurry viscosity values were between 1 900 and 2 000 MPa·s. Also, the micro hardness values in different parts of hardened concrete specimens were closed. The results were applied in practical bridge engineering, which generally meets the apparent quality requirements of bridge fair faced concrete.     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

菲牛蛭抗凝血活性物质提取方法研究

为对菲牛蛭抗凝血活性物质的提取进行优化,通过采取不同方法对菲牛蛭活体(6种)、干体(6种)及唾液腺分泌物(3种)进行提取得出最适提取方法。结果表明对于菲牛蛭活体和干体均是采取80%预冷丙酮提取得到的抗凝血物质含量高,最高分别达至(61.20±1.13)AT-U/g和(89.19±1.13)AT-U/g;对于菲牛蛭唾液腺分泌物则是采取10%的三氯乙酸提取得到的抗凝血物质含量高,最高达(24.41±0.98)AT-U/g。研究结果得出了适合菲牛蛭活体、干体和唾液腺分泌物中提取抗凝血活性物质的最适方法,有利于推动水蛭素的大规模生产和广泛的临床应用。     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。     

Analysis of thermal stress in a water pipe of blast furnace copper stave

To solve the general problem that copper staves experience water pipe failure in blast furnace,the effects of constraints on the thermal stress distribution of copper stave water pipe are investigated by thermal-structural coupling analysis.In this study,a mathematical model of thermal stress of copper stave is established to analyze the thermal deformation and stress distribution of water pipe under subject to different types of constraints.The results show that the thermal stress on the root of water pipe is larger than others as the terminal of water pipe is free or being fixed.But the equivalent stress on the root of water pipe is just 45 MPa as the terminal of water pipe is free,which is lower than the yield strength of pure copper.The equivalent stress on the root of water pipe is about 272 MPa as the terminal of water pipe is being fixed,and exceeds the yield strength of pure copper.The water pipes should be flexible.The maximum equivalent stress is about 600 MPa as the water pipe is subjected to the constraint of shell,which is far beyond the yield strength of pure copper.The maximum displacement is located at the end of water pipe and is about 1.73 mm.Then the diameter of the hole should be 120 mm with taking installation error into consideration.     

TEM INVESTIGATION ON AGED ION-NITRIDING LAYER OF PURE IRON

The phase transformation in the diffusion layer after slow cooling and aging of pure iron ion -nitrided was investigated with TEM. Refering to principle of Moire method measuring macroscopical strain, the values of coherent strain at interfaces between a" and aN phases were determined by means of TEM analyses.     

Penetration behavior of bath induced by top-blown gas jets for steelmaking converter

The cavity induced by top-blow gas jets impinging on the bath surface is one of most important parameters, which has overwhelming influence on the rate of slag formation and metallurgical performance. Water model experiments are conducted through a 1/10 scaled-down top-blown convertor. Effects of lance height and gas flow rate on penetration behavior are studied, and also the influence mechanism of liquid surface tension on penetration depth is addressed based on the experiments and theory analysis. An energy utilization index (EUI) is defined to reflect how much the impinging kinetic energy of gas jets are transferred into bath for formation of cavity, and an improved model is proposed to predict penetration depth of jets. The results show that penetration depth increases with lowering lance height and increasing gas flow rate, and impact diameter increases with increasing lance height, but is little affected by gas flow rate. Influence of liquid surface tension on penetration depth is enhanced with increasing surface tension and penetration depth. The EUI increases with increasing lance height, and a function relationship of it with lance height is obtained based on the experiments.