噻嗪酮·异丙威可湿性粉剂的高效液相色谱分析

本文介绍了采用高效液相色谱法以甲醇 水为流动相,采用C18不锈钢柱,230nm检测波长对25%噻嗪酮·异丙威可湿性粉剂进行分离测定,异丙威和噻嗪酮的标准偏差分别为0.058、0.015,线性相关系数分别为0.9992、0.9994;平均回收率分别为99.47%、99.73%。     

硅颗粒对Al-Si合金显微组织的影响

通过在不同温度下向亚共晶AlSi合金熔体中加入固体Al20%Si(质量分数)合金,研究了初生硅颗粒对Al7%Si合金显微组织产生的影响。结果表明:随着处理温度的降低,显微组织从树枝状α相加含针状硅的共晶相,转变成球形α相加含短针状硅的共晶相,最后变成硅颗粒加粗化的球形α相和更少的共晶相。当选择合适的Al20%Si合金组织和处理温度时,采用该工艺可有效地制备半固态成形用坯料。结合初生硅颗粒在亚共晶AlSi合金熔体中的变化过程,对Al7%Si显微组织的演化机理进行了分析。     

河南省芝麻花叶病病原的分子鉴定

<正>芝麻是我国主要的油料作物,引起芝麻黄化花叶等症状的芝麻花叶病病原是马铃薯Y病毒属花生条纹病毒芝麻分离物(peanut stripe virus sesame isolate,PSt V-se)(杨书军等,1993;晏立英等,2009),且国外也研究发现芝麻花叶病病原是马铃薯Y病毒属的成员之一(Sreenivasulu et al.,1994;Pappu et al.,1997)。河南省作为芝麻主产区之一,引起当地芝麻花叶病的病原尚不清楚,本试验通过采集河南     

篱式果园纺锤形断面设计研究

在不同纬度地区建立篱式果园时,为充分利用太阳光能,必须确定合适的树篱断面形式及其适合的地理纬度。在每年春分到秋分这段生长期内,为满足篱式果园树冠基部每日中午前后都有3h以上的直射光照,利用天文三角公式计算太阳在不同纬度地区某日各时刻的位置,并计算在南北成行的条件下,满足光照奈件的树篱的确形角。在满足光照条件下,依不同的冠高与冠间距的比值分析确定三角形断面树篱适合的地理纬度,并利用前人的研究与该文相结合,进而讨论确定在不同纬度地区三角形断面树篱的最佳参数。然后,将三角形断面转化为纺锤形断面,为在篱式果园中纺锤形断面的设计提供理论依据。     

苹果金纹细蛾的生物学特性及药剂试验

苹果金纹细蛾（Ｌｉｔｈｏｃｏｌｌｅｔｉｓ ｒｉｎｇｏｎｉｅｌｌａ Ｍａｔｓ．）在鲁中南地区１年发生５～６代,以蛹在苹果落叶内越冬,翌年３月下旬是开始再现越冬代成虫,４月上旬达盛期。成虫羽化后于次日清晨５：００～６：００开始交配,持续交配１．５～３ｈ,交配后不久在叶片背面产卵,单个散产,平均单雌产卵４０余粒。幼虫孵化后直接景入叶片内取食叶肉,并非苞内化蛹。在１５～３０℃,卵、幼虫、蛹的发育历期分别为     

糖苷水解酶家族基因AghyGH1a参与莲草直胸跳甲对皂苷的代谢

为了解植物化合防御物质皂苷对专食性天敌莲草直胸跳甲Agasicles hygrophila的防御作用,测定莲草直胸跳甲2龄幼虫取食皂苷后的排泄和肠道变化,利用转录组测序筛选参与皂苷代谢的候选基因,并采用 RNA 干扰技术鉴定候选基因功能。结果发现,取食皂苷导致莲草直胸跳甲幼虫排泄量增加,肠道畸变,排泄量与取食皂苷浓度正相关。转录组测序发现,与对照相比,取食 100 mmol/L皂苷处理的莲草直胸跳甲幼虫肠道有496条差异表达基因,其中261个上调基因和235个下调基因。GO分类和KEGG分类分析发现糖苷水解酶家族1（glycoside hydrolase family1,GH1）基因集中在碳水化合物水解通路。利用RNA干扰技术鉴定发现,莲草直胸跳甲AghyGH1a基因沉默可导致幼虫取食皂苷后排泄量增加,肠道内容物颜色更暗沉。表明莲草直胸跳甲AghyGH1a参与皂苷代谢。     

黄淮海地区不同种植结构下点蜂缘蝽的发生规律

为明确大豆-玉米带状间作种植模式对点蜂缘蝽Riptortus pedestris发生规律的影响,2023年在山东省大豆单作田中进行诱捕效果试验,筛选诱捕效果最好的诱捕器对黄淮海地区山东、河南和安徽3个省6个市不同种植模式下点蜂缘蝽的发生动态进行监测。结果显示,风叶型诱捕器对点蜂缘蝽的诱捕效果最佳。在大豆单作田内点蜂缘蝽的发生高峰期为7月中旬—8月中旬,此时大豆正值盛花-始荚期。在大豆-玉米带状间作田内点蜂缘蝽的发生动态与大豆单作田的无明显差异,但点蜂缘蝽发生数量及高峰期发生时间可能与杀虫剂的施用时间和次数密切相关。     

Identification,Characteristics and Function of Phosphoglucomutase (PGM) in the Agar Biosynthesis and Carbon Flux in the Agarophyte Gracilariopsis lemaneiformis (Rhodophyta)

Agar is widely applied across the food, pharmaceutical and biotechnology industries, owing to its various bioactive functions. To better understand the agar biosynthesis in commercial seaweed Gracilariopsis lemaneiformis, the activities of four enzymes participating in the agar biosynthesis were detected, and phosphoglucomutase (PGM) was confirmed as highly correlated with agar accumulation. Three genes of PGM (GlPGM1, GlPGM2 and GlPGM3) were identified from the G. lemaneiformis genome. The subcellular localization analysis validated that GlPGM1 was located in the chloroplast and GlPGM3 was not significantly distributed in the organelles. Both the GlPGM1 and GlPGM3 protein levels showed a remarkable consistency with the agar variations, and GlPGM3 may participate in the carbon flux between (iso)floridoside, floridean starch and agar synthesis. After treatment with the PGM inhibitor, the agar and floridean starch contents and the activities of floridean starch synthase were significantly decreased; products identified in the Calvin cycle, the pentose phosphate pathway, the Embden-Meyerhof-Parnas pathway and the tricarboxylic acid cycle were depressed; however, lipids, phenolic acids and the intermediate metabolites, fructose-1,6-phosphate were upregulated. These findings reveal the essential role of PGM in regulating the carbon flux between agar and other carbohydrates in G. lemaneiformis, providing a guide for the artificial regulation of agar accumulation.     

上海优质粳稻产业现状及高质量发展对策

总结了上海优质粳稻产业发展现状,分析了产业发展中存在的问题,提出了相应对策。具体对策为：进一步优化茬口布局,推进用养结合型稻田农作制;实现优质水稻品种创新和绿色生产关键技术提升;以智慧农业为引领,积极推进现代农机农艺应用,提升绿色水稻产能水平;实施地产稻米品牌战略,促进提质增效。     

Comparing surface erosion processes in four soils from the Loess Plateau under extreme rainfall events

This research aims to improve erosion control practice in the Loess Plateau, by studying the surface erosion processes, including splash, sheet/interrill and rill erosion in four contrasting soils under high rainfall intensity (120 mm h⁻¹) with three-scale indoor artificial experiments. Four contrasting soils as sandy loam, sandy clay loam, clay loam and loamy clay were collected from different parts of the Loess Plateau. The results showed that sediment load was significantly impacted by soil properties in all three sub-processes. Splash rate (4.0–21.6 g m⁻²∙min⁻¹) was highest in sandy loam from the north part of the Loess Plateau and showed a negative power relation with the mean weight diameter of aggregates after 20 min of rainfall duration. The average sediment load by sheet/interrill erosion (6.94–42.86 g m⁻²∙min⁻¹) was highest in clay loam from middle part of the Loess Plateau, and the stable sediment load after 20 min showed a positive power relation with the silt content in soil. The average sediment load increased dramatically by rill and interrill erosion (21.03–432.16 g m⁻²∙min⁻¹), which was highest in loamy clay from south part of the Loess Plateau. The average sediment load after the occurrence of rill showed a positive power relation with clay content and a negative power relation with soil organic matter content. The impacts of slope gradient on the runoff rate and sediment load also changed with soil properties. The critical factors varied for different processes, which were the aggregate size for splash erosion, the content of silt particles and slope gradient for sheet/interrill erosion, and the content of clay particles, soil organic matter and slope gradient for rill erosion. Based on the results of the experiments, specific erosion control practices were proposed by targeting certain erosion processes in areas with different soil texture and different distribution of slope gradient. The findings from this study should support the improvement of erosion prediction and cropland management in different regions of the Loess Plateau.