一体化微操作器误差分析与建模

为评价各种误差对微操作器精度的影响，以一体化超精密微操作器为研究对象，分析了加工误差、机构原理误差、测量误差、环境带来的误差以及驱动误差等造成微操作器精度降低的因素，建立了加工误差的偏微分方程解析模型，并用有限元仿真验证了加工误差模型的准确性。在详细分析误差源的基础上，提出了提高微操作器精度的措施。     

Building Enviornmental Monitoring System With COM

This article presents an implement of component using COM technology for collecting environmental monitoring data in environment monitoring system. The component makes the separation of data collection and data analysis available.Simultaneously by using the interface of connectable object in COM,itmakes the cooperation of the environment monitoring software with other parts of fault management software available,and also the seamless connection.It improves the system's performance by adding extensibility and potential cooperatibility.     

Influence of the Flood-Control-Projects on the Hydrodynamic State of the Rivers Confluence in Chongqing

Though the Flood-Control-Projects along Yantze River and Jialing River in Chongqing may well improve the urban traffic and construction,it may change the river hydrodynamic characters.There may be two consequences,one is to reduce the size of cross section and the other is to change the river shape,such as the curvature radius.The phenomena of the local backwater and velocity variety are obvious,which result in some problems for the navigation: sediment,transport and so on.In this paper, the study object is the Flood-Control-Projects and Yangtse River and Jialing River,and the aim is to study the influence of the Flood-Control-Projects on the hydrodynamic state of the two rivers.Using the numerical technique,with the two rivers hydrodynamic model the flow field's change of river after completion of Flood-Control-Projects is simulated and the reasons caused by the change are analyzed.     

Behavior and Design of High-strength Bolt in Tensile Connection

The tensile strength of high strength bolt is affected by many factors, including prying force. The prying force can result in the increment of bolt force, for which the connection failed ahead of time. Several methods are presented for calculating the prying force. In the China's "Code for Design of Steel Structure" (GB50017), there is no formula for calculation of prying force and a factor of 0.8 is considered in formula for tensile strength of bolt for taking the prying force into account. It is proposed that the design value of tensile resistance for high strength bolt should be increased.     

泵站中钢筋混凝土梁加固的变形计算

基于试验研究资料的分析,对于大型泵站中具有合适锚固的CFRP片材加固受弯构件变形计算方法进行研究,认为加固梁的弯矩-曲率曲线符合三线型规律（混凝土开裂前,混凝土开裂后,受拉钢筋屈服后）.通过解析分析,得到试验梁在通常两点加载条件下的任一加载阶段的弯矩及变形计算公式,与相应条件试验梁的试验测试结果吻合,可为泵站工程设计规程的制定提供参考。     

可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.     

Modeling soil water dynamics in a drip-irrigated intercropping field under plastic mulch

Intercropping, drip irrigation, and the use of plastic mulch are important management practices, which can, when utilized simultaneously, increase crop production and save irrigation water. Investigating soil water dynamics in the root zone of the intercropping field under such conditions is essential in order to understand the combined effects of these practices and to promote their wider use. However, not much work has been done to investigate soil water dynamics in the root zone of drip-irrigated, strip intercropping fields under plastic mulch. Three field experiments with different irrigation treatments (high T1, moderate T2, and low T3) were conducted to evaluate soil water contents (SWC) at different locations, for different irrigation treatments, and with respect to dripper lines and plants (corn and tomatoes). Experimental data were then used to calibrate the HYDRUS (2D/3D) model. Comparison between experimental data and model simulations showed that HYDRUS (2D/3D) described different irrigation events and SWC in the root zone well, with average relative errors of 10.8, 9.5, and 11.6 % for irrigation treatments T1, T2, and T3, respectively, and with corresponding root mean square errors of 0.043, 0.035, and 0.040 cm³ cm^?3, respectively. The results showed that the SWC in the shallow root zone (0–40 cm) was lower under non-mulched locations than under mulched locations, irrespective of the irrigation treatment, while no significant differences in the SWC were observed in the deeper root zone (40–100 cm). The SWC in the shallow root zone was significantly higher for the high irrigation treatment (T1) than for the low irrigation treatment, while, again, no differences were observed in the deeper root zone. Simulations of two-dimensional SWC distributions revealed that the low irrigation treatment (T3) produced serious severe water stress (with SWCs near the wilting point) in the 30–40 cm part of the root zone, and that using separate drip emitter lines for each crop is well suited for producing the optimal soil water distribution pattern in the root zone of the intercropping field. The results of this study can be very useful in designing an optimal irrigation plan for intercropped fields.