A Laboratory Column Study on the Biodegradation of Toluene and Methyl tert–Butyl Ether: The Effect of Substrate Interactions

Soil vapor extraction (SVE) is one of the most effective remediation technologies for soil and groundwater contamination. Soil particles can be mobilized by air perturbation during SVE, resulting in the differentiation of porous media, which has not been well addressed. This paper developed a numerical method to study the flow pattern and quantify the change of porous media for the first time. Based on the mass equilibrium and Darcy’s law, a two-phase water–air flow model was constructed with integration of saturation, relative permeability, and capillary pressure during SVE. Relationship between porosity and saturation was deduced and coupled with the two-phase flow model for quantifying change of porous media in real time. Results reveal that both porosity and permeability increase sharply in the early stage of SVE then gradually to a quasi-steady state. These increases in vadose zone tapered off with distance from the SVE screen and the steady period occurred later as well. The influence radius of a single SVE well and the change degree in porosity and permeability of media were proportional to the extraction vacuum and the driving coefficient C, which is more sensitive than extraction vacuum according to the simulation results. Knowledge from this modeling exercise provides a useful tool to estimate the change of remediated zone and assess the environmental risk of remedial activities at real-world contamination sites.     

Biochar-induced changes in soil properties affected immobilization/mobilization of metals/metalloids in contaminated soils

Purpose

Remediation of metal contaminated soil with biochar is attracting extensive interest in recent years. Understanding the significance of variable biochar properties and soil types helps elucidating the meticulous roles of biochar in immobilizing/mobilizing metals/metalloids in contaminated soils.

Materials and methods

Six biochars were produced from widely available agricultural wastes (i.e., soybean stover, peanut shells and pine needles) at two pyrolysis temperatures of 300 and 700 °C, respectively. The Pb-, Cu-, and Sb-contaminated shooting range soils and Pb-, Zn-, and As-contaminated agricultural soils were amended with the produced biochars. The mobility of metals/metalloids was assessed by the standard batch leaching test, principal component analysis and speciation modeling.

Results and discussion

The changes in soil properties were correlated to feedstock types and pyrolysis temperatures of biochars based on the principal component analysis. Biochars produced at 300 °C were more efficient in decreasing Pb and Cu mobility (>93 %) in alkaline shooting range soil via surface complexation with carboxyl groups and Fe-/Al-minerals of biochars as well as metal-phosphates precipitation. By contrast, biochars produced at 700 °C outperformed their counterparts in decreasing Pb and Zn mobility (100 %) in acidic agricultural soil by metal-hydroxides precipitation due to biochar-induced pH increase. However, Sb and As mobility in both soils was unfavorably increased by biochar amendment, possibly due to the enhanced electrostatic repulsion and competition with phosphate.

Conclusions

It is noteworthy that the application of biochars is not equally effective in immobilizing metals or mobilizing metalloids in different soils. We should apply biochar to multi-metal contaminated soil with great caution and tailor biochar production for achieving desired outcome and avoiding adverse impact on soil ecosystem.

     

Identification of a RAPD marker linked to a brown planthopper resistance gene in rice

We report the tagging of a brown planthopper (BPH) resistance gene (Bph–1) in rice using RAPD and RFLP markers. The Korean rice variety ‘Gayabyeo’ has dominant duplicate genes including Bph–1 conferring resistance to biotype 1 of BPH. Bulked segregant RAPD analysis was employed for rapid identification of DNA markers linked to resistance genes. For tagging these two genes, an F2F3 population from a ‘Gayabyeo’ × ‘Nagdongbyeo’ cross was developed and evaluated for BPH resistance. Three bulked DNAs from two groups of homozygous BPH resistant (each for Bph–1 and the other unknown gene) and homozygous susceptible F2 plants were analyzed by RAPD using 140 random oligomers. One primer, OPD–7 yielded a 700-bp fragment that was present in Gayabyeo and resistant F2 plants (homozygous for Bph-1 locus) but absent in Nagdongbyeo and susceptible F2 plants. Cosegregation of this marker with Bph-1 was verified using an F2 population segregating for Bph-1. Chromosomal regions surrounding the Bph-1 were examined with additional RFLP and microsatellite markers on chromosome 12 to define the location of the RAPD marker and Bph-1. Use of this RAPD marker could facilitate early selection of resistant lines for BPH. This revised version was published online in July 2006 with corrections to the Cover Date.     

Inheritance pattern of chloroplast and mitochondrial genomes in artificial hybrids of Porphyra yezoensis (Rhodophyta)

ABSTRACT:   To investigate inheritance of chloroplasts and mitochondria (organelles) in the marine red alga Porphyra yezoensis , cleaved amplified polymorphic sequence (CAPS) profiles of the two strains, TU-2 and KGJ, as parental gametophytes and 44 hybrid sporophytes (i.e. female of TU-2 and male of KGJ) were examined. A carbamyl phosphate synthase small subunit gene ( carA ) and ribosomal protein S11 gene ( rps11 )-small subunit ribosomal RNA gene ( rns ) spacer region were used as molecular markers for the chloroplast and mitochondrial DNAs, respectively. Thirty-eight of 44 (86.4%) conchocelis colonies showed maternal banding patterns, five (11.4%) colonies showed biparental bands and one (2.2%) colony showed paternal bands in CAPS analyses both with chloroplast and mitochondrial markers. These results suggest that organelles of P. yezoensis are inherited uniparentally from the female parent.     

Acetyl- and butyrylcholinesterase inhibitory activities of sterols and phlorotannins from Ecklonia stolonifera

ABSTRACT:   As part of this study on the isolation of cholinesterase inhibitors from natural marine products, the bioactivity of the ethanolic extracts from 27 Korean seaweeds were screened using acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory assays. Ecklonia stolonifera exhibited promising inhibitory properties against both AChE and BChE. Bioassay-guided fractionation of the active n -hexane and ethyl acetate (EtOAc) soluble fractions, obtained from the ethanolic extract of E. stolonifera , resulted in the isolation of the sterols; fucosterol ( 1 ) and 24-hydroperoxy 24-vinylcholesterol ( 2 ), from the n -hexane fraction and the phlorotannins; phloroglucinol ( 3 ), eckstolonol ( 4 ), eckol ( 5 ), phlorofucofuroeckol-A ( 6 ), dieckol ( 7 ), triphlorethol-A ( 8 ), 2-phloroeckol ( 9 ) and 7-phloroeckol ( 10 ), from the EtOAc fraction. Of these, compounds 2 , 9 and 10 were isolated from E. stolonifera for the first time. Compounds 4 – 7 , 9 and 10 exhibited inhibitory potential against AChE, with 50% inhibition concentration (IC₅₀) values of 42.66 ± 8.48, 20.56 ± 5.61, 4.89 ± 2.28, 17.11 ± 3.24, 38.13 ± 4.95 and 21.11 ± 4.16 μM, respectively; whereas, compounds 1 , 2 , 4 and 6 were found to be active against BChE, with IC₅₀ values of 421.72 ± 1.43, 176.46 ± 2.51, 230.27 ± 3.52 and 136.71 ± 3.33 μM, respectively. It has been suggested that the inhibition of these enzymes by the sterols and phlorotannins derived from marine brown algae could be a useful approach for the treatment of Alzheimer's disease.     

Immobilization antigen-independent protection of olive flounder (Paralichthys olivaceus) against Philasterides dicentrarchi (Ciliophora: Scuticociliatia) infection

To determine whether olive flounder (Paralichthys olivaceus) immunized with lysate of Philasterides dicentrarchi could be protected immobilization antigen (i-antigen) type independently, fish were immunized with lysate of ciliates obtained from in vitro cultures or ciliates obtained from infected fish. Fish immunized with ciliates obtained from infected fish were completely protected against artificial infection with in vitro cultured P. dicentrarchi, in spite of a weak or no serum agglutination activity against in vitro cultured ciliates. The present results indicate that i-antigen-independent protection was elicited by immunization of fish with the ciliates lysate, and the cultured ciliates would provide a good source for preparation of vaccines, which are cross-protective against various i-antigen types of P. dicentrarchi.     

The grafting of recycled polyol from waste polyurethane foam onto new polyurethane and its impact on shape recovery and water vapor permeation

Recycled polyols from waste polyurethane (PU) foams were grafted onto PU to improve the properties such as tensile strength, shape recovery, low-temperature flexibility, and water compatibility. The recycled polyol was either purified by column chromatography before grafting or was used directly for grafting. The soft segment melting temperature of PU did not notably increase with the addition of polyol, whereas the glass transition temperature increased with increased polyol content. The tensile strength sharply increased at low polyol content and decreased at high polyol content, while the strain at break did not significantly change with an increase in polyol content. The shape recovery at 10 oC notably improved compared with unmodified PU and remained high after four cyclic tests. Polyol-grafted PU demonstrated better lowtemperature flexibility and reduced the water vapor permeability of PU membranes. Overall, grafting recycled polyol onto PU significantly improved the tensile stress, shape recovery, and low-temperature flexibility of PU.     

Isolation and characterization of nanocrystalline cellulose from different precursor materials

Nanocrytalline cellulose (NCC) was isolated using cellulose extracted from two different precursor materials: Eucalyptus globulus and rice straw. The two ground precursor materials were autoclaved with a 10 % NaOH solution at 120 °C for 3 h. The alkali-treated precursor materials were bleached using sodium chlorite/acetic acid and sodium hypochlorite. The bleached precursor materials were acid-hydrolyzed in 65 % (w/w) sulfuric acid at 45 °C for 30-120 min. The changes in the chemical composition of the two precursor materials were studied before and after bleaching by Fourier transform infrared spectroscopy according to the NREL report and TAPPI standards. Hydrolyzates were characterized by X-ray diffractometry, thermogravimetric analysis, Zeta-potential analysis, and transmission electron microscopy. The results revealed that the physical properties of NCC were strongly dependent on the acid-hydrolysis time.     

Preparation and properties of solid polymer electrolyte based on imidazolium-based ionic liquids for structural capacitors

We prepared solid polymer electrolytes (SPEs) composed of poly(ethylene glycol) monomethyl ether acrylate (1A9OMe) and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIm][OTF]) and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl) imide ([EMIm][TFSI]) as the ionic liquid. The SPEs formed by appropriately adding ionic liquids in the 1A9OMe prior to thermal cure. The ratio of 1A9OMe and ionic liquid was 1:9, 3:7, and 5:5, respectively. The characterization of solid polymer electrolytes were investigated using Fourier transform infrared spectroscopy in the attenuated total reflectance mode (FTIR-ATR), Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and glavanostatic charge-discharge test. The highest ionic conductivity of SPEs was found to be 4.90×10^?4 S/cm in a 1A9OMe/[EMIm][OTF] of 3:7. As IL contents were increased, the specific capacitance of supercapacitor was increased. The specific capacitance of supercapacitor for ionic liquid with large ion size was lower than that for ionic liquid with smaller ion size.     

基于代码生成的电控空气悬架系统电子控制单元

为提高某型SUV车辆的行驶平顺性、通过性等,对其进行空气悬架改装,并设计了由最小系统、车速信号调理模块、电动气泵控制模块、组合电磁阀控制模块、车身高度检测模块、CAN总线模块、车身加速度测量模块等组成的以Freescale XDP512为核心芯片的电控空气悬架系统电子控制单元,利用Real-Time Workshop(RTW)代码生成技术将所制定电控空气悬架系统控制策略转化为ANSI C代码并下载至电子控制单元,然后对安装电控空气悬架系统的试验车辆进行了车身高度与车速耦合试验、转向试验、急加速试验、急减速试验、平顺性试验,结果表明所设计的电控空气悬架系统控制单元能够实现车速信号调理、车身高度与车速耦合、电动气泵控制及组合阀控制等功能。