Effect of weed interference on Zea mays: Growth analysis

In order to investigate the effect of weed competition on corn, growth trials were conducted in Shushtar, Iran, using a comparative growth analysis. In this study, two sets of treatments were imposed, based on the phenological stages of corn development, using a randomized complete block design with three replicates. The results showed that barnyardgrass and redroot pigweed were the most dominant weeds in these trials. Increasing the duration of weed interference reduced the corn leaf area index gradually. The reduction in the corn leaf area index led to a decline in the crop growth rate as a result of a reduction in the ability of corn to capture light and its photosynthetic ability. The total dry matter and relative growth rate of corn were decreased when the weeds were removed later as a result of a reduction in the leaf area index. According to these results, the leaf area index has a critical role in weed–crop competition.     

High performance fibers production process using Taguchi experimental design

In this research, results of an experimental interaction effect of operating parameters on tensile strength carbon fibers from a commercial PAN-based precursor are investigated. Ten parameters at two and four levels (L₃₂=2¹×4⁹) were investigated: stabilization temperature at first stage (STFIS), stabilization duration time at first stage (SDTFIS), stabilization temperature at second stage (STSS), stabilization duration time at second stage (SDTSS), stabilization temperature at third stage (STTS), stabilization duration time at third stage (SDTTS), stabilization temperature at fourth stage (STFOS), stabilization duration time at fourth stage (SDTFOS), carbonization temperature (CT), and carbonization duration time (CDT). In this study, Taguchi method was used initially to plan a minimum number of experiments. Statistical analysis, analysis of variance (ANOVA), was also employed to determine the relationship between experimental conditions and yield levels. ANOVA was applied to calculate sum of square, variance, ratio of factor variance to error variance and contribution percentage of each factor on response. The results show that increasing all of parameters improves tensile strength performance. The optimum levels of influential factors, determined for tensile strength are STFIS 200 °C, SDTFIS 120 min, STSS 225 °C, SDTSS 120 min, STTS 240 °C, SDTTS 120 min, STFOS 260 °C, SDTFOS 60 min, CT 1400 °C and CDT 10 min. The results showed that CT and ODTFIS are the most and the less effective factors on response, respectively.     

Optimization of an artificial neural network topology using coupled response surface methodology and genetic algorithm for fluidized bed drying

In this study, an integrated response surface methodology (RSM) and genetic algorithm (GA) are recommended for developing artificial neural networks (ANNs) with great chances to be an optimal one. A multi-layer feed forward (MLFF) ANN was applied to correlate the outputs (energy and exergy) to the four exogenous inputs (drying time, drying air temperature, carrot cubes size, and bed depth). The RSM was used to build the relationship between the input parameters and output responses, and used as the fitness function to measure the fitness value of the GA approach. In the relationship building, five variables were used (number of neurons, momentum coefficient and step size in the hidden layer, number of epochs and number of training times). A polynomial model was developed from training results to mean square error (MSE) of 50 developed ANNs to generate 3D response surfaces and contour plots. Finally, GA was applied to find the optimal topology of ANN. The ANN topology had minimum MSE when the number of neurons in the hidden layer, momentum coefficient, step size, number of training epochs and training times were 28, 0.66, 0.35, 2877 and 3, respectively. The energy and exergy of carrot cubes during fluidized bed drying were predicted with R² values of greater than 0.97 using optimal ANN topology.     

Identifying Soil and Plant Nutrition Factors Affecting Yield in Irrigated Mature Pistachio Orchards

The main objective of this study was to evaluate the potential use of a hybrid Genetic Algorithm-Artificial Neural Network (GA–ANN) method for predicting pistachio yield and for identifying the determinant factors affecting pistachio yield in Rafsanjan region, Iran. A total of 142 pistachio orchards were selected randomly and soil samples were taken at three depths. Besides, water samples and leaves from branches without fruit were taken in each sampling point. Management information and pistachio yields were achieved by completing a questionnaire. Primarily, 58 variables affecting pistachio yield were measured, and then 26 out of them were selected by minimizing mean square error (MSE) using a feature selection (FS) method. The results showed that the accuracy of the method was acceptable. Furthermore, the sensitivity analysis showed that the main determinant features affecting the pistachio yield were the irrigation water amount, leaf phosphorus, soil soluble magnesium, electrical conductivity (EC), and leaf nitrogen.     

The Use of Coal Gangue as a Cultivation Bed Conditioner in Forage Maize Inoculated with Arbuscular Mycorrhizal Fungi

A greenhouse pot experiment was conducted to investigate the effect of application of coal gangue (CG) at different rates (0, 5, 10, 20, and 50%) and inoculation with two arbuscular mycorrhizal (AM) fungi Glomus intraradices and Glomus mosseae, as mediating plant adaptation to soil amended with CG, on the nutrient content of forage maize. The results showed CG amendment at all levels and both AM fungi significantly improved the nutrient content of the plant as compared to control. In general, the highest shoot dry weight and nutrient phosphorus, iron, and zinc (P, Fe, and Zn) were obtained with 10% CG and G. intraradice treatments, which were 49.68, 30.49, 16.72, and 75.71% higher than those of the control plants, respectively. Therefore, 10% dose of CG may be considered as a suitable dose for amendment in the corn cultivation bed in terms of providing nutrient contents for this plant as well as AM fungi root colonization.     

Synthesis of highly intercalated urea-clay nanocomposite via domestic montmorillonite as eco-friendly slow-release fertilizer

The present study describes the preparation and characterization of montmorillonite-urea nanocomposites (Mt-Ur) using aqueous suspension technique at various stirring times and different ratio of montmorillonite to urea (Mt/Ur) via an impure and domestic montmorillonite (Mt), without the application of any chemical reagents and high-energy-demand process (environmentally friendly). The intercalation of urea into Mt interlayer was clearly demonstrated by a significant expansion of d₀₀₁ spacing (interlayer space of Mt) from 1.23 to 1.71 nm which has not yet been reported by aqueous suspension technique. Analyses performed by Fourier transform-infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA) and X-ray diffraction (XRD) also confirmed the effectiveness of this simple process to intercalate the urea into clay lamella. The release pattern demonstrated that the nanocomposite had a slow-release behaviour for urea dissolution. The results also suggested that the Mt type applied in the current study, in a 1:20 Mt/Ur ratio and stirred for 1 h, possessed desirable ecological and economic efficiency in the production of slow-release urea fertilizer due to the application of the impure and domestic clay which is of very low-cost and eco-friendly. Nevertheless, urea was fully intercalated into the interlayer of clay by a simple technique and with a good slow-release behaviour.     

Isolation and identification of effective cellulolytic bacteria in composting process from different sources

Cellulolytic bacteria have a bio-activating role in the composting process. A study was carried out to isolate and identify cellulolytic bacteria from various sources. The isolates were cultured in the carboxymethyl cellulose (CMC) agar medium and incubated at 30°C for 3–7 days. Based on morphological characteristics of the isolates, maximum diameter of a clear zone around the colony and maximum cellulolytic activity, eight isolate were selected for further studies regarding composting experiments.

Molecular tests based on PCR amplification and sequencing of 16S rRNA gene of isolates showed the closest phylogenetic similarity with the species of Stenotrophomonas rhizophila DSM14405 (99.8%), Brevibacterium halotolerans DSM8802 (99.6%), Achromobacter marplatensis B2 (99.8%), Bacillus methylotrophicus CBMB205 (100%), Pseudomonas azotoformans IAM 1603 (99.7%), Bacillus sonorensis NBRC 101234 (99.8%), Bacillus subtilis KCTC 13429 (100%) and Ochrobactrum thiophenivorans DSM 7216 (99.3%). The study of the isolates impact on the composting of palm wastes in a randomized complete block design with 11 treatments in 3 replications showed that strain IB (B. methylotrophicus) caused a significant decrease in C:N ratio (58%). The increasing of microbial respiration compared with control after 30 days incubation at 37°C showed that the B. methylotrophicus strain IB with cellulolytic characteristics can be applied to hydrolysis of cellulosic biomass in the composting processes.     

Drought tolerance in four-day-old seedlings of a drought-sensitive cultivar of wheat

Four-day-old seedlings of spring wheat (Triticum aestivum L. cv. Marvdasht) can tolerate severe dehydration and recover after re-watering. In order to clarify tolerance mechanism, in a completely randomized design, the seedlings were exposed to drought by complete water cessation for 10 and 20 days, followed by re-watering for 3 and 7 days. Upon dehydration, the activity of α-amylase increased whereas growth parameters; photosynthetic pigments; and the activities of lipoxygenase, indole acetic acid (IAA) oxidase, and ascorbate peroxidase (APX) decreased. The activity of APX and the expression of its gene, however, increased after re-watering. Prolonged dehydration was also accompanied by increase in sucrose, soluble proteins, fructans, and certain amino acids, e.g. proline, glutamine, and valine. The results indicated that during dehydration, 4-day-old wheat seedlings shifted their energy expenditure from basal metabolism to withstand water deficiency via lowering the activity of membrane-damaging enzymes and enhancing the production of osmoprotectants.     

Colonization with endo-mycorrhiza affects the resistance of safflower in response to salinity condition

Two Safflower (Carthamus tinctoriusL.) cultivars' seeds were used to study the influence of inoculation with mycorrhiza arbuscular fungi under salinity stress condition. Factorial experiment based on completely randomized design (three-way analysis of variance (ANOVA)) with 3 replications was used. Salinity treatment with 3 levels (0.5, 6, and 12 dS/m) and mycorrhizal arbuscular inoculation with two species (three levels consist of non-inoculation, and inoculation with Glomus intraradices and G. moseae) were applied on two cultivars of safflower (Goldasht and Padide) in this experiment. Some important biochemical, mineral, and growth traits were measured in this study. Salinity had a significant negative effect on all growth and morphological parameters including shoot and root dry weight, stem and root height. On the other hand, colonized plants showed better growth parameters under saline conditions compared with the control. The colonization of both mycorrhizal species decreased with salinity. Sugar and pigment content decreased with salinity, but their levels in colonized plants under saline conditions were higher than that in non-colonized plants. Mineral elements including phosphorus (P), nitrogen (N), and magnesium (Mg) were higher in colonized plants, while salinity decreased the absorption of these elements in both inoculated and non-inoculated plants. Higher activity of the enzymatic antioxidant means higher removal of these compounds and higher resistance to stress condition. Overall, it is clear that salinity had a negative effect on both cultivars of safflower, but these negative effects were lower in inoculated plants than in the non-inoculated ones; so, the use of mycorrhizal inoculation is a proper way to control the effect of salinity and maintain plant production.     

Expression of ROR1 in patients with renal cancer--a potential diagnostic marker

Background: The ectopic expression of receptor tyrosine kinase Ror1 has been reported in patients with hematological malignancies such as chronic lymphocytic leukemia and acute lymphoblastic leukemia. Here we report, for the first time, expression of ROR1 gene in both tumor tissues and peripheral blood mononuclear cells (PBMC) from patients with renal cancer (RC). Methods: In the current study, the expression of ROR1 gene was semi-quantitatively measured in PBMC and tumor tissues from 16 RC patients as well as PBMC from 22 healthy individuals relative to the expression of the housekeeping gene phosphoglucomutase 1 by RT-PCR. Results: Our results showed that ROR1 was expressed at gene level in 81.3% of renal tumor tissues (13 out of 16) whereas it was expressed in 94% of PBMC from RC patients (15 out of 16). A weak expression of ROR1 was observed in PBMC of 4 out of 22 healthy individual. A significant expression of ROR1 was observed in PBMC from RC patients when compared to that in PBMC from normal healthy individuals (P<0.001). The expression of ROR1 in PBMC may reflect a shedding of tumor cells into blood stream. Conclusion: We conclude that detection of a high level of ROR1 expression in blood cells might assist in early detection of renal malignancies, providing taking into consideration the clinical symptoms of the disease. Key Words: ROR1, Ectopic expression, Renal cancer