黑皮冬瓜嫁接砧木的筛选与鉴定

挑选南瓜砧、蒲瓜砧和葫芦砧共10个品种,以佛山市三水黑皮冬瓜为接穗,采用斜顶插接法嫁接,露地栽培管理,比较其产量和农艺性状。试验结果表明,DZ-01冬瓜砧、京欣砧三号和强势作为三水黑皮冬瓜的嫁接砧木,可有效降低枯萎病发病率,增产10%以上,商品性状得到明显改善,商品品质差异不显著,推广应用性强。     

不同基因型大麦苗期对干旱胁迫的响应及HvPIPs基因表达特征分析

为研究不同基因型大麦苗期对干旱胁迫的响应,挖掘优质抗旱的大麦种质资源,以4份不同基因型大麦(2个高抗品种ZDM5430和ZDM5458,2个干旱敏感型品种7DCADA和IL-12)为材料,利用聚乙二醇(PEG-6000)模拟干旱条件,综合分析不同品种大麦的苗期抗旱性差异;并通过对不同品种根系进行PIPs实时定量分析,研究水通道蛋白AQPs基因与干旱胁迫之间的应答关系。结果表明,持续干旱胁迫会使大麦生长变缓,各处理苗长、根长、叶含水量和根含水量都呈下降趋势,其中,4个品种的大麦叶含水量在干旱胁迫14 d时下降最为显著,与对照相比,其降幅分别为29.14%、52.64%、21.67%和72.15%。干旱胁迫对大麦苗期干物质积累量和根冠比的影响较小,各处理间差异不显著;但持续干旱后,抗旱品种ZDM5430的根冠比呈上升趋势,在胁迫7、14、21 d时较CK分别增加了4.92%、42.86%和21.05%。随着胁迫时间的延长,大麦旗叶叶绿素含量和根系活力也呈下降趋势,其中ZDM5430和ZDM5458较对照组降幅较小,说明抗旱品种的形态指标、叶绿素含量及根系活力受干旱胁迫的影响较小。通过PIP...     

Dynamic Modeling and Simulation of 440 t/h Steam-cooled Cyclone Separator for CFB Boiler

A dynamic mathematical model of the steam-cooled cyclone separator in a 440 t/h CFB boiler has been established.Based on the mathematical model,simulation model of the cyclone separator is created with the advanced continuous simulation language(ACSL).The validity of this model has been verified by the simulation experiments and analysis.This model can provide a theoretical guidance for operation and optimal design of the cyclone separator.     

Philosophy of Science and the Chinese Contemporary Architectural Forms

Philosophy of science led by Popper is one of the most important contemporary scientific and philosophic theories.In addition to the science,the philosophy of science impacted contemporary social science mostly,of which the false-feasibility,circumstantial logic,anti-historical determinism and anti-scientism influenced the orientation of contemporary architecture.Just with these factors of philosophy of science,this thesis reanalyzed and reviewed Chinese contemporary architectural forms,especially the tradition inheritance.     

粮食生产的机械化问题

粮食牛产机械化是生产力发展的一个重要方而，也是一种必然趋势。机械化生产手段可以提高粮食产量，确保粮食生产持续发展，提高粮食生产效率和经济效益。粮食生产机械化不仅是农业技术变迁的一种自然发展过程，而且与制度变迁密切相关、互相促进。在粮食生产机械化中，有很多现实问题需要解决。     

Effects of arrangement of surge-rootirrigation emitters on growth,yield andwater use efficiency of apple trees

Six-year old apple trees were selected for field experiment. The objective of this study was to obtain the reasonable arrangement of surge-root irrigation emitters in apple orchards. There were three factors: the buried depth H( 25,40,55 cm),the horizontal distance L( 30,40,60 cm) between the emitters and the trunk of the experimental tree,and the number of the irrigation emitters N( 1,2,4). The effect of the arrangement of surge-root irrigation emitters on the growth,yield and irrigation water use efficiency( IWUE) of apple trees were studied in Northern Shaanxi where the irrigation quota takes 60%-75% of the field water capacity. The results showed that the arrangement of emitters for surge-root irrigation had a significant effect on apple tree yield and IWUE,especially,the yield and IWUE reached 28 388. 17 kg/hm2 and 16. 83 kg/m3 in treatment T3,respectively. At the same L and N levels( T1,T2,and T3),the yield and IWUE in treatment T3 were the highest,and the yields in treatments T1 and T2 were decreased by 26.22% and 31.48%,while IWUE is reduced by14.02% and 18.12% compared with T3,respectively. At the same H and N levels( T3,T4,and T5),the yield and IWUE of apple trees were decreased with increasing L level. Especially,when L was 30 cm( T3),the yield and IWUE were the highest. The same L and H levels( T3,T6,and T7) could promote the growth of apple trees when N was 2( T3). Compared with treatment T3,it was found that the increment of new shoots was decreased by 8.07%-18.71%,and the fruit diameter was decreased by 5.41%-9.11%. Therefore,two emitters should be arranged symmetrically on both sides of an apple tree,each was buried at a 40 cm depth and 30 cm away from the trunk of the tree to effectively improve the yield and IWUE of the apple tree in mountainous areas in Northern Shaanxi.     

滑动轴承在农业机械中的使用与维护

轴承主要用来支承轴及轴上零件,并保持轴的旋转精度和减少转轴与支承之间的摩擦和磨损.为此,探讨了滑动轴承的工作原理、常见故障类型及采取的防范措施,针对故障原因对滑动轴承进行日常维护,为推动轴承在农业机械中的合理使用和维护提供参考依据.     

基于图素拼装原型的轴类零件参数化设计

阐述了在轴类零件的设计中，以图素拼装原理为基础实现参数化设计的原理和方法；探讨了利用图素拼装原理，将轴类零件设计中重复出现的具有相同结构和功能的几何形体提取出来，作为基本图素的参数化绘图系统，使用该系统，可以大大提高设计速度及图形处理效率。     

新型耕作制度下的吉林省农业机械作业模式

鉴于吉林省农业生产的特点,“良种、良法 机械”的农业技术取向已成共识,即应该把良种培育、耕作栽培方法和机械化作为技术重点。后二者的关系非常密切,好的耕作方法要通过一定的机械手段来实施,新型耕作制度要求有新的农业机械作业模式与之相适应。为此,在总结传统与现代农业耕作制度下的生产作业模式的基础上,探索了新耕作制度条件下的吉林省农业机械作业模式。     

云龙河拱坝施工过程的三维有限元

采用三维弹塑性非线性有限元法，对云龙河拱坝施工过程的实际浇筑、封拱和水库蓄水过程的坝体应力及变形进行了仿真分析，同时分析了施工过程的坝肩层间错层带的变形。计算结果表明施工过程的坝体变形较小，坝体有限元等效应力满足规范要求，坝肩层间错层带错动变形很小，说明大坝结构设计合理，坝肩无错动危险。计算成果为工程项目的实施提供了技术依据，同时对类似工程分析具有借鉴作用。